e67a6a1297
add osdinoise
2023-11-04 19:36:30 +01:00
5223f4b27d
fix(hicuml2): ensure flicker noise power is always stored in state vec
2023-11-04 19:36:30 +01:00
c21f87051a
always compute osdi noise powers
...
ngspice will reuse operating points for noise analysis so we can not trust
the mode flags
2023-11-04 19:36:30 +01:00
826cddb483
add examples for OSDI noise
2023-11-04 19:36:30 +01:00
f66e0bf2ac
implement osdi noise support
2023-11-04 19:36:30 +01:00
04c68d5f30
Cleanup child processes on Windows VisualC and Mingw. On Linux those processes quit when ngspice quits.
2023-10-28 19:45:24 +02:00
864ef7925c
Add notes on the structure and organization of an external d_process program.
2023-10-28 19:43:50 +02:00
4219efb5d5
Make it explicit that null output ports are not allowed. The output port vector bounds are always >= 1.
2023-10-28 19:43:46 +02:00
5c6b9f03b5
Fix the zero count.
2023-10-28 19:43:41 +02:00
1f5f7ae439
Update d_process examples.
2023-10-28 19:43:36 +02:00
c83d11c9c0
Call cm_cexit() to prevent the simulator running when d_process initialization errors occur.
2023-10-28 19:43:23 +02:00
21761207bc
Change license to 3-clause BSD (see
...
https://sourceforge.net/p/ngspice/ngspice/merge-requests/6/?limit=25#fd4f/73e6 )
2023-10-28 14:55:13 +02:00
09f070f582
Error handling improvements in cfunc.mod. Ensure that d_process.h wiil always respond to version and interface checks sent from sendheader. This is needed so that the pipe reads in sendheader do not cause Windows to hang when the interface version and in/out counts do not match. This hang was the cause of errors not being reported and the Windows gui hanging. Startup and header checks are now detected in cm_d_process, and the simulator will run but with runtime errors since a d_process model cannot be completely instantiated after initial errors. It would be good to find a means of gracefully halting the simulation run.
2023-10-28 11:00:33 +02:00
8c72a76844
Another attempt at clean up of error handling and reporting. It's OK on limux and cygwin, but Windows VisualC is being stubborn. I would prefer not to have to call exit(1) just for Windows, since then nothing is reported and the gui disappears in a puff of smoke. Even without the exit calls nothing gets reported with the Windows gui which will hang when there are errors detected by d_process.
2023-10-28 11:00:28 +02:00
4eae039779
Add modifications note.
2023-10-28 11:00:23 +02:00
4530cde8e2
Use Xspice cm_message_send to report errors rathen than printing to stderr and calling exit. When a d_process model has errors found in start(), sendheader(), and dprocess_exchangedata() these are reported, but if the model is run a SIGINT is raised. There must be a better way of stopping the simulator.
2023-10-28 11:00:18 +02:00
182764a894
Add examples/xspice/d_process.
2023-10-28 11:00:12 +02:00
df28fabc42
Restore the deleted unused params to be backword compatible. Handle the case where the d_process instance has a null in vector, so that N_din is zero. This allows the model to be just a pattern generator. Add include to cmproto.h to avoid a forward ref. to an enum type.
2023-10-28 11:00:03 +02:00
307ba1985b
Remove unused reset_state param; do not allow null in and out, so there is at least 1 input and 1 output.
2023-10-28 10:59:52 +02:00
7820940be3
Remove the unused reset_delay param.
2023-10-28 10:59:42 +02:00
e762047fc2
Add array bounds check, fix typos.
2023-10-28 10:59:34 +02:00
022a340ddb
Fix VisualC and Mingw compiler warnings.
2023-10-28 10:59:11 +02:00
cccb4a1559
Add callback to free process memory.
2023-10-28 10:58:39 +02:00
33780055ee
Add MODIFICATIONS note, cleanup white space.
2023-10-28 10:58:28 +02:00
5c4352d02f
Add __MINGW64__ defines for builds on mingw with msys.
2023-10-28 10:58:15 +02:00
3bb6e86015
Add Windows Visual Studio support for the Isotel d_process xspice digital model. The Isotel mixedsim-master/examples/embedded/motorforce C code needs to have minor changes for _MSC_VER defines, and are not included with this commit. The changes relate to using #pragma pack(push, 1)...#pragma pack(pop) around some structs, and setting stdin/stdout in binary mode. It is doubtful that the cfunc.mod will compile on mingw or cygwin since I don't know if they support pipe/fork/exec/spawn calls. The code builds and runs on Windows, Linux, and MacOS. In the future, Giles Atkinson is looking at allowing Xspice models to load shared libraries (.dll, .so) which will avoid creating and communicating with an external program.
2023-10-28 10:58:06 +02:00
046be0cdc8
Use the PSP103 model pspnqs103va (including nqs option)
...
as this is the standard in the IHP Open PDK.
2023-10-27 23:25:42 +02:00
efdf332061
Prevent a crash if hash model table was not generated,
...
e.g. due to missing valid models.
2023-10-27 23:13:41 +02:00
ce82c839e3
dependent project klu_complex added
2023-10-23 16:50:49 +02:00
10d7297798
Add cm_cecit(). If the input file could not be opened, stop ngspice.
2023-10-21 15:52:10 +02:00
19ebfb1887
Add a code model function cm_exit(const int exitcode).
...
This function calls controlled_exit(exitcode) to shut
down gracefully.
2023-10-18 22:46:27 +02:00
f26dda8616
Formatting
2023-10-18 17:44:56 +02:00
39443fafdd
Removing unused models takes much more time than keeping them
...
for large circuits.
Probably a hash table may help here (t.b.d.).
2023-10-18 14:36:08 +02:00
8ef0aece58
During setup of the models thre have been search scans in the
...
linked model list modtab. The time used here grows approx.
quadratically with the number of models. If the numbers get large,
e.g. with the IHP Open PDK, setup time make simulation impractical.
Therefore the linked list modtab has been enhanced by a hash table
modtabhash, which allows linear search time and makes simulation
of a 200k transistor circuit with IHP PDK possible. Already
the setup time for 15k transistor circuits has been reduced.
2023-10-18 14:34:16 +02:00
9702557f81
Evaluate function gauss() in B sources. This is required when
...
in .model files the tokens 'temper' and gauss() coexist, because
then the B Source function parser is applied.
2023-10-16 17:53:58 +02:00
4b226bf11c
add output for all noise sources
2023-10-11 09:52:44 +02:00
77c4cb5452
new bipolar noise example
2023-10-11 09:52:10 +02:00
eb36084700
re-formatting (indentation, tabs removed)
2023-10-11 00:08:55 +02:00
9edf34495e
Don't say 'issue in line no. 0', as this 'info' does not tell
...
where the line with position 0 really is in the input deck.
2023-10-09 23:19:30 +02:00
7c3cb8169c
This is a re-write of the PWM generator.
...
It is modelled according to the new d_OSC by Giles Atkinson.
Here frequency is fixed and duty cycle is controlled by an
analog input.
2023-10-07 17:13:55 +02:00
ecb416b800
This patch fixes a bug when shared library uses XSPICE:
...
Don't subtract delta twice, when breakpoint is active
and step is rejected.
https://sourceforge.net/p/ngspice/patches/106/
Thanks to Vyacheslav Shevchuk
2023-10-07 17:10:31 +02:00
9944a4869f
typo
2023-10-07 13:36:56 +02:00
7ab929e945
klu and osdi are becoming standard now.
2023-10-05 00:26:02 +02:00
53315ed764
Prevent crash when no input file given.
2023-10-05 00:19:51 +02:00
4f79105b06
Add comment
2023-10-02 10:07:52 +02:00
233f9daba4
Remove unused instance parameter ic (initial condition of controlling source).
2023-10-01 10:51:31 +02:00
b1f367bc07
Remove adms
...
Add KLU and OSDI
2023-09-30 00:48:29 +02:00
28b495318d
Update to command 'wrnodev':
...
Prevent crash if tran is not (yet) run.
Open output file only when data are available.
Enhanced comment and warning message.
2023-09-28 10:05:31 +02:00
e449c894ce
Prepend title line by '*' if printed by 'listing r'.
...
This allows skipping all pre-processing.
2023-09-27 15:51:16 +02:00
76f837b0b7
skip all pre-processing for expanded input files created by 'listing r'
2023-09-27 15:49:37 +02:00
dwarning
Pascal Kuthe
Pascal Kuthe
Brian Taylor
Holger Vogt
h_vogt