951be0ddb0
New dot command .probe:
...
Code to enable current measurements at all top level
device pins and to enable differential voltage measurements
between two (arbitrary, top level) device nodes.
Adds 0 V voltage sources for current measurements to selected or all
device nodes at top level (including X lines)
Adds an E source excited by two arbitrary nodes for differential
potential (aka voltage) measurements between these nodes
Function inp_probe() is called from inpcom.c
2021-12-13 21:46:57 +01:00
7f75b2a7b8
Update to previous commit: safeguard against no circuit loaded
2021-12-13 21:46:29 +01:00
54eb12de39
Fix a bug: Crash when 'settype @d1[id]' is given,
...
but simulation is not yet run.
Add a better check for having at least one simulation run
2021-12-13 21:46:15 +01:00
1ce0066d3b
Update to previous commit: corrected and enhanced warning messages
2021-12-13 21:46:03 +01:00
16fd8749cf
Fix a bug: Crash when 'settype @d1[id]' is given,
...
but simulation is not yet run.
Ask for the job before acknowledging settype on
a vector starting with @
2021-12-13 21:44:30 +01:00
2f98a5b305
evtprint: prevent a crash when eprint has been called
...
but there is no simulation run.
2021-12-13 21:44:02 +01:00
bff90f1498
Put the gmin reversal into the comment
2021-12-13 21:43:50 +01:00
5424fd0d43
Reverse the sequence of dynamic-gmin and new-gmin.
...
The old method dynamic-gmin now comes first,
new-gmin will follow when the former has failed to converge.
2021-12-13 21:43:30 +01:00
f66573883f
Fix typo in the diode/README file.
2021-12-13 21:43:09 +01:00
a46b2041c2
Fix pz1.cir test so that the Cider OP data file is saved and the PZ analysis is run.
2021-12-13 21:42:53 +01:00
79c71a4ec3
Enable math characters in vector (node) names for command fft
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:42:36 +01:00
ccd9a217c3
Enable math characters in vector (node) names for logic comparison
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:42:25 +01:00
8895a6e633
Enable math characters in vector (node) names for command alter
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:42:12 +01:00
ee2f3a72f4
Enable math characters in vector (node) names for command fourier
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:41:58 +01:00
98b7074287
Enable math characters in vector (node) names for command spectrum
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:41:48 +01:00
c09839b209
Enable math characters in vector (node) names for commands
...
write and print
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:41:37 +01:00
57f6d41e69
Enable math characters in vector (node) names for plotting
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:41:28 +01:00
e93a19e3e8
Allow math characters in node names
...
Add a function ft_getpnames_quotes()
It puts quotes " around tokens xxx, when these are enclosed as
V(xxx) and contain arithmetic characters. V(R*C) becomes
V("R*C"). After settig up the parse tree, the quotes are removed again.
Thus these math character remain part of the node name and are not
parsed as parts of an equation.
2021-12-13 21:41:16 +01:00
d5dc757288
correct assignment of a variable value to a 1-bit-field
...
only by a logic comparison.
2021-12-13 21:40:57 +01:00
90377dcff9
struct TSKtask: group all single bit fields together
2021-12-13 21:40:38 +01:00
26979079d4
prevent few compiler warnings
2021-12-13 21:40:15 +01:00
a457a83e66
Update on macOS, prepare ngspice-36
2021-12-13 21:38:08 +01:00
acc84b47f7
Updating compile scripts for macOS
...
Use either built-in Clang (without OpenMP) or
Homebrew gcc-11.
2021-12-13 21:34:23 +01:00
3f3936c728
Remove memory leaks
2021-12-13 21:34:07 +01:00
fc7464b366
Update, add libraries required
2021-12-13 21:33:47 +01:00
89eaf7739c
Remove unused variables
2021-12-13 21:33:09 +01:00
a420f58ef5
Plug a (potential) memory leak
...
Add missing memsaved
2021-12-13 21:32:46 +01:00
6b41ad433a
Remove memory leak
...
Free some tokens generated by CNVget_token
Initialize reset and clk
Still missing: free 'states'
2021-12-13 21:32:15 +01:00
36fa47a8a0
Remove memory leak
...
Add callback function free_local_data
Free some tokens generated by CNVget_token
2021-12-13 21:31:49 +01:00
8f9bf94a38
Aware of sscanf return value
2021-12-13 21:30:55 +01:00
ba6d8c871c
white spaces
2021-12-13 21:30:32 +01:00
ba9f5be52c
Prevent arithmetic overflow and reduce operations
2021-12-13 21:29:37 +01:00
87b9df6681
CIDER: Examples for 2D plotting with gnuplot
2021-10-30 13:21:53 +02:00
38848259e4
With the ngspice gnuplot command, enable x/y contour plots for 2d Cider save file data. Usage: gnuplot <file> xycontour <expr>. xycontour is a new flag which is ignored if the plot data is not from 2d Cider. For contours, only a single plotarg <expr> is allowed. With <expr1> vs <expr2>, only <expr1> is plotted and <expr2> is ignored.
2021-10-30 13:21:32 +02:00
550e9f1a81
correct some scaling rules
2021-10-30 11:03:26 +02:00
f638a63fba
save few calculation effort in diode load routine
2021-10-30 11:03:05 +02:00
62242a5538
save few calculation effort in bjt load routine
2021-10-30 11:02:54 +02:00
133f9c46e7
prevent unwanted fallthrough
2021-10-30 11:02:25 +02:00
ae49043fe3
correct scaling for IBC parameter
2021-10-30 11:02:13 +02:00
b15c7d29f1
correct temp update for IBE and IBC parameter
2021-10-30 11:01:51 +02:00
01fb0ac18b
introduce IBE and IBC model parameter for more accurate current calculation
2021-10-30 11:01:36 +02:00
231e6218a5
remove comment regarding ancient leakage current defaults
2021-10-30 11:01:24 +02:00
5ff04ee85b
c2 and c4 are now aliases for B-E and B-C leakage saturation currents
2021-10-30 11:01:09 +02:00
fb98f7873b
remove some compiler warnings
2021-10-30 10:46:39 +02:00
ced6b038a5
cpl gc: Add missing files to project file
2021-10-30 10:45:58 +02:00
9806fb3b9e
cpl gc: Add missing files to project file
2021-10-30 10:45:30 +02:00
f3cb69403a
bug 497: Prevent a crash in CPL
...
Forbiddeb combination of model parameters.
Details are not yet available.
2021-10-30 10:44:44 +02:00
69e2903bf6
Update to Garbage Collector for cpl
...
Update some comments
Insert the deleting functions
Reset pool_vi and ndn_btree
Add an example with 20 call to cpl in sequence
2021-10-30 10:44:29 +02:00
041264df03
No more meory leaks with existing cpl examples:
...
Add cpldelete.c and cplmdel.c
Delete the model parameters.
Add 2 missing memsaved().
2021-10-30 10:44:07 +02:00
9ede9b80e0
Issue a warnong only when ngdebug is set.
2021-10-30 10:43:38 +02:00
Holger Vogt
Brian Taylor
dwarning