1b17c5cc59
VDMOS, prepare SOA with new parameters
...
Model parameters pd_max, id_max, idr_max, and te_max
(power dissipated, drain current, drain reverse current, temperature)
2021-08-24 17:52:33 +02:00
6cfe98ce43
Update to the optran circuit examples:
...
TLV9002-test.cir: Rely on optran from spinit
TLV6001-test.cir: Override optran from spinit
2021-08-24 17:50:18 +02:00
5758d58349
spinit: add optran to the standard inits
2021-08-24 17:48:17 +02:00
2936b11764
Add MOS model cards
2021-08-24 16:16:07 +02:00
c8d76014b9
SOA for bipolar
...
Replace pow_max by pd_max
2021-08-24 16:15:46 +02:00
10b2f96ed1
Enable command 'optran' in spinit or .spiceinit,
...
when the circuit is not yet loaded.
Then the optran data are stored in static variables,
until optran is called again with arg NULL from inp.c,
to set the data in ft_curckt->ci_defTask.
2021-08-24 15:53:31 +02:00
0f46f9b228
List definition needs spaces between ( and next token,
...
and between token and )
Update to comment.
2021-08-24 15:51:09 +02:00
b43b4023eb
Add short description of the new examples
2021-08-20 20:28:10 +02:00
3c3c039515
Linux line endings (LF only)
2021-08-20 20:24:55 +02:00
152be62ae3
Example OpAmp which converge for op only with optran:
...
TLV6001 and TLV9002
2021-08-20 20:22:12 +02:00
15dc796656
remove old files
2021-08-20 20:19:03 +02:00
4ff37a9fb1
Example file with three dual opamp filters.
...
Different opamps: TL072, OPA1656, OPA1612
2021-08-20 20:18:41 +02:00
c83f441bb2
Three OpAmp Example for optran
2021-08-20 20:04:54 +02:00
1368fba469
line endings LF (Linux)
2021-08-20 20:03:58 +02:00
a3973c7fe0
optran is only selected when the 'optran' command has been processed.
...
If not, the call to the OPtran() function returns the previous
'converged' value.
2021-08-20 18:46:50 +02:00
034f8a4959
Don't do optran, if command optran is not given.
2021-08-20 17:09:20 +02:00
e093844b18
Update comment: 0 is no initial iteration
2021-08-20 16:56:47 +02:00
3f68f91bf5
Add command 'write_ic'
...
Write out the right hand side status of the matrix in format
.ic = V(node_xx)
This may be possible at the end of a simulation or after a 'stop'
of the simulation, which may be resumed again afterwars. This
status may be used to start another simulation with these
parameters by inluding into the netlist.
2021-08-20 15:30:02 +02:00
45dda4bbe2
Add command 'write_ic'
...
Write out the right hand side status of the matrix in format
.ic = V(node_xx)
This may be possible at the end of a simulation or after a 'stop'
of the simulation, which may be resumed again afterwars. This
status may be used to start another simulation with these
parameters by inluding into the netlist.
2021-08-20 15:29:47 +02:00
dcc770cdbd
Clarify use of 'optran' command
2021-08-20 15:29:27 +02:00
f374e90ad4
if 'set ngdebug' print out transient initial conditions also with UIC set.
2021-08-20 15:29:15 +02:00
a50f51760c
make the error detection work properly
2021-08-20 15:28:58 +02:00
eee0c6f1b0
Add optran.c
...
New custom build commands as suggested by VS
2021-08-20 15:28:42 +02:00
edea5bf67b
Use InpEvaluate() instead of strtod to enable ngspice numbers
...
with scale factors Meg k m u n p f etc.
2021-08-20 15:28:24 +02:00
15907a592c
Reverse stepsize and finaltime in optran command,
...
stepsize first as in tran command.
2021-08-20 15:27:44 +02:00
9a42ff82a6
prevent crash if first breakpoint is beyond optran max time
2021-08-20 15:27:27 +02:00
c21ba645d2
add tran simulation
2021-08-20 15:27:07 +02:00
86b1f6d6a6
test of supply ramping
2021-08-20 15:26:50 +02:00
3048f62aad
updates to optran description and example.
2021-08-20 15:26:13 +02:00
3f27a560ee
upon finishing 'optran', restore old CKTstep
...
remove unused
2021-08-20 15:25:59 +02:00
c76ee6f275
safeguard command 'optran' against circuit no being loaded
2021-08-20 15:25:35 +02:00
5bbaa81c48
add missing header
2021-08-20 15:25:16 +02:00
0754a35296
header for optran
2021-08-20 15:25:03 +02:00
82c7df4c3d
Pass Labs F5 Turbo
...
example for optran
2021-08-20 15:24:39 +02:00
2bf1c1c24a
When we sre ready, reset CKTmaxstep to its previous value
2021-08-20 15:24:22 +02:00
bea73b1ccd
set maxstepsize to stepsize
2021-08-20 15:24:07 +02:00
6fc4bfc1b9
set the task values, not the ckt values,
...
because task is called only afterwards when
the simulation command is given.
2021-08-20 15:23:48 +02:00
fdc42ca2c9
fix some text entry
2021-08-20 15:23:32 +02:00
a335e8840b
short description of branch contents
2021-08-20 15:23:12 +02:00
f18b1b76d1
set stepsize
2021-08-20 15:22:49 +02:00
6f13f494cf
Add command 'optran' to set 6 flags for transient op
2021-08-20 15:22:25 +02:00
d05dc7a604
optran.c also in MSVC
2021-08-20 15:22:02 +02:00
d183b47e04
Transient op calculation added to the standard operating point code.
...
When standard iteration, gmin stepping and source stepping fail,
try a transient simulation (like tran with uic option) to
determine the op. Implemented for AC and Tran simulation.
2021-08-20 15:21:12 +02:00
151be5478d
Add new SOA parameters (safe operating area) for BJT.
...
We now scan for max of Ic, Ib, power, taking into
account the max allowed temperature, using the thermal
resistance rth0 model parameter between juntion and ambient.
Two user options are there: If rth0 is given, we calculate
a derating of the max power allowed.
Without a constant max power according to model param pow_max
is assumed.
The new model parameters for the bipolar model are:
pow_max, ic_max, ib_max, te_max, and rth0, in addition
to the already existing vbe_max, vbc_max, adn vce_max.
2021-08-20 12:23:38 +02:00
a8d8e54edf
Allow global .temp in addition to instance parameter 'temp'.
...
Update to comments.
2021-08-20 11:50:01 +02:00
d227fce509
Remove the old SOA examples
2021-08-20 11:48:33 +02:00
0604ae6486
New folder with SOA (safe operating area) examples
...
in the ngspice examples section
2021-08-20 11:48:09 +02:00
1cd0dc86af
Patch to allow (and ignore) leading or trailing commas
...
when putting {} around tokens. Tested with PWL voltage source.
Patch has been suggested by Liqian Zhang
2021-08-18 17:06:48 +02:00
ee260bbfbe
Some update to SOA for a diode:
...
Limit output to four digits
Add power and temperature limits.
Derating with self-heating, or with fixed temperature,
or no derating at all, selectable by setting model parameters.
Example file: SOA plotted as frame, with diode current.
2021-08-18 14:03:31 +02:00
e1186461b1
Make the output a little more verbose:
...
add terminal voltage to Id, Te, and Pd outputs.
Compare SOA data to terminal voltage, not (unknown) junction voltage.
2021-08-17 14:12:07 +02:00
Holger Vogt