reading GDS files, caused by an unneeded change to pass both
the "original" filename and the actual filename when handling
compressed files---The original filename is unneeded.
(2) Implemented several new methods for parasitic extraction. The
first is an option offset value to apply to sidewall calculations.
This handles issues where actual wire separation is different
from drawn wire separation, which can be significant for the
1/d calculation of sidewall coupling. The second method is to
use the recently-added fringe halo to compute the coupling of the
fringe capacitance to nearby wires. Prior to this change, all
fringe capacitance was applied to surfaces directly under a wire
edge as if the fringe capacitance did not extend outward from the
edge. Now the capacitance is properly pro-rated for the position
of any overlapped shape inside the fringing field. Finally, the
third method added is a new search algorithm for finding the
nearest shapes along the length of a boundary. This is used for
sidewall coupling and fringe shielding, where the nearest shape
dominates the coupling, and any shapes behind are shielded and
may (to first order) be ignored. Previously, the entire halo
was searched without regard to shapes shielding other shapes
behind, and a recent correction added an ad-hoc search for
blocking shapes that was inefficient and not always correct.
The new method is both efficient and accurate.
Compression levels of the output can be controlled with the "gds
compress [<value>]" command, where <value> 0 (default) is uncompressed
output, 6 is "normal" gzip compression, and 9 is maximum compression.
of systems calls to "gzip" and "gunzip". A compressed GDS file can
be made simply by doing "gds write <name>.gds.gz", and can be read
simply by doing "gds read <name>.gds.gz". Names of compressed files
can be put in the GDS_FILE property of a cell.
to NULL for a read-only view. . . Changed the command "what" so that
it will not fail on a non-edit cell. There are likely a few other
commands that should not fail on non-edit cells because they do not
alter anything.
recognized as a valid command when file locking has been disabled as
a compile-time option. The command then generates an error on
"locking enable" but simply ignores the command "locking disable".
shrink routine that over-computes the diagonal position (the
equation failed to divide the intersecting angle in half).
Rewrote the equation for the correct grow distance, still
accounting for the grid limit (if set).
extFindNodes() does; consequently, ExtLabelRegions() when called
after ExtFindRegions() may accidentally chain together a substrate
region with whatever was left in this linked list after the
previous call to extFindNodes(), with unpredictable results.
linking it to Tk or X11 graphics. Added new command "display" which
returns the display type, which is good for finding out if the
display is "NULL". Added code to allow the wrapper to be defined
for NULL graphics with the Tk console, the main necessities of which
are to remove the "openwrapper" command, and to return immediately
from a number of tag callback functions.
in github issue #149. This causes magic to no longer write log files
for "make" and "make install" but will properly exit with a non-zero
return code on any error during compile.
Also: Corrected the command "tech drc surround <type1> <type2>" so
that it now returns the correct value when <type1> and <type2> are in
the same plane. Added new command "tech drc directional <type1> <type2>"
which works the same way as "tech drc surround" except for directional
surround rules. Used this to generate vias from "def write" with the
correct metal surround amounts included in the via definiton. The
route analysis then ignores tile slivers that make up the surrounding
material around contacts. Also implemented a method that handles
routes that are made of multiple thin tiles due to the maximum horizontal
stripes rule. Now magic handles "def write" well except for not dealing
with non-minimum-width routes unless they're specifically called out as
"special" nets.
is specified in the extraction section of the techfile, then magic
will compute the effect of a nearby shape partially shielding the
sidewall overlap capacitance, which approaches 100% shielding as
the shapes converge to zero separation. This method prevents
magic from vastly overestimating the fringe capacitance of closely
spaced wires, which was magic's worst problem with parasitic
accuracy. The "fringeshieldhalo" value is the distance at which
the fringe shielding becomes negligible. Typically, it will be
about three times the distance at which half the fringe value is
shielded. It may be necessary at some point to make both the
fringe shielding halo and the sidewall halo values per-type values
(or per-plane, at least). For now, it should suffice to bring
Magic's parasitic extraction back in line with other tools.
the name of the cell use if the cell use is a top level window. It
was accidentally discovered that using "select top cell ; select flat"
will do this (creating label text with spaces in the process, which is
illegal syntax for netlists).
not be seen during hierarchical processing, causing the substrate
to get split into several names that may conflict in the netlist.
At issue is the fact that ExtLabelRegions() will not attach a
default substrate label to a default substrate region. This may
need further untangling, as extFindNodes() will set the default
substrate node and is sometimes followed by ExtLabelRegions(),
which will label it. Any place ExtFindRegions() is called, this
could be an issue.
number from the git repository, which is overall more reliable than
the version number, but mainly to support a common method across the
open source tools for providing information to builds like open_pdks
that may need to know what version of every tool was used for the
build.
Most of this had to do with the incorrect use of the parent's substrate
name in extHierSubstrate(). After the correction, there still remains
an issue that is caused when a labeled isolated substrate region overlaps
an extraction tile boundary. I believe that this particular error has
existed for some time and is not new, so I am committing these changes.
a routine that should have been called with a NULL argument, but
instead was called with no argument, making the behavior system-
dependent. Revised the parsing of the "defaultareacap" and
"defaultperimeter" statements in the tech file, such that the short
version of both statements gets automatic handling of the substrate
and isolated substrate areas; this goes back to the recent change
in extraction behavior to redefine the "substrate type" (e.g., pwell)
during extraction as defining isolated substrate areas, and not the
default substrate. The earlier code change dealt with problems
related to extracting nodes and regions, but did not consider how
parasitic capacitance was affected. This commit resolves that issue.
The extSubtree() routine cuts a layout into squares and extracts
each separately, checking for subcell interactions. In each
square it parses all labels looking for unconnected ones. This
section of code not only parses all labels M x N times, but it
then marks interaction areas where there may be none, forcing
additional unnecessary processing. This commit makes the first
quick optimization, which is to change the return value of
DRCFindInteractions() from boolean to integer, allowing it to
return a value indicating that there are no subcells in the
area. This prevents the loop through labels from happening in
cases where there can never be interactions. More to come.
check for abstract views to determine how to handle the substrate
node. Running tests to check if this has any negative impact on
the extraction of abstract views that do not specify substrate
and well types.
traditionally been kept for backwards compatibility. However, the
operation of "ext2spice" and "ext2sim" as separate programs has
become extremely difficult to maintain, and so it has been dropped
in favor of folding both into the program as commands, as was done
a long time ago in the Tcl/Tk version.
cell properties in natural sort order when writing a .mag file.
This should remove the last bit of indeterminism in the output
of magic database files.
the label to be attached to a non-contact type when the label is
actually over a contact are not handled correctly when checking if
multiple labels should belong to the same port record.
timestamps that are fixed, since the timestamp update routine is
called from too many places, too many times. Instead created a
new cell definition flag indicating a fixed timestamp, which can
be set by "cellname timestamp" for an individual cell, or with
"gds datestamp" for cells read from a GDS file.
"gds datestamp <value>" as an option to force a specific datestamp
on the GDS output. This is a third option beyond the previous two
which were either to use the current time or to write zero. The
new option allows an entire library to get a common timestamp, for
example, related to a PDK version number. The "gds nodatestamp"
option has been retained for backwards compatibility.
in a cell to account for the difference between what's in an input
GDS file and what magic would write out itself from the processed
data. This potentially allows library cells to be read in that
will generate the equivalent mask data as output without resorting
to using GDS file references as properties. The method is activated
with the new command option "gds maskhints on" and the default is
off.
Tim Edwards