This is mostly a minor definition change in the parsing of literal
numbers by the vvp lexor. Allow for 64bit numbers in the .delay
records, and have the code generator also able to cope with the
situation.
Previously Icarus normalized the results so array [7:0] would
be the same as array [0:7]. This works just fine for
simulation, but the VPI calls can select the left or right
value and this was incorrect for the [7:0] case since it was
being normalized to [0:7]. This patch swaps the two values in
the a.out file and from this creates the previous first/last
values and a new flag that can be used to get the correct
left and right values for the VPI interface.
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
Two bugs:
(1) propagating values through the branch accidentally also
did a part select.
(2) Not all nodes of the branch nexus didn't receive a calculated
values, even though they were all marked as done.
In the process, I cleaned up the code a bit, and documented it for
better understanding.
The code was using vpi_free_object() to free a vpiCallback
object and that was creating a memory leak since this is a
do nothing routine. You need to explicitly use delete.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).
You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.
With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.
Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
If an &A() operator contains a label for an array that has not
yet been declared, vvp fails with an assertion error. This
patch delays the calls to array_find() in the functions that
compile &A() operators, using the usual resolve list mechanism.
Most named objects should have a vpiModule handle to get a handle
to the enclosing module. This patch adds code to get this for all
the elements that I could find that needed it.
It also adds a three more names to vpi_get_str(vpiType, ...) and
fixes a problem in the vpiLeftRange for PV signals.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
Certain paths through vpi_put_value cause a vpip_put_value_event to
be created with no path for deleting in. Add the capability in the
schedule_generic method, so that it can be delete as soon as it is
executed.
This patch fixes vvp to use the standard static result buffer
when returning the vector value of a constant string. The
previous calloc method was creating a memory leak.
This patch fixes some more memory leaks in vvp. Mostly related
to UDP compilation and one in find_scope() that was found when
testing the VPI code. The leak in ivlpp was that the define
temporary buffer not being freed when the lexor was finished.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
Rather then spread VERSION= defines throughout all the makefiles, put
the base version in version_base.in. Use that to generate a version.h
that includes the base version as well as the detailed version.
This reverts commit 31d67fcd3e.
The concensus has been that this causes too many build problems in
the general case and what is needed instead is a way to turn on the
extra warnings for developers only.
Functions that appear in continuous assignment expressions and that
have hidden dependencies or side effects need to be re-evaluated
whenever any input to the expression changes. This patch adds support
in the compiler and vvp runtime to enable this. This is currently
activated for any system function call that has no arguments. The
user may also force it to be used for any user function by passing
the option -gstrict-ca-eval to the compiler driver.
This patch also removes the -dautomatic option which was used for
gaining confidence in the code that supports automatic tasks and
functions. It is believed that the testsuite provides reasonable
fault coverage, and further tests can be added if bugs are found.
The code base is almost shadow-free now, so this won't add much noise to the compiles.
Problems I know about:
lxt{,2}_write.c: patch sent upstream
cflexor.c: exposes gray area of name space boundary
Finish cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in the test suite.
This is the end of the simple, coordination-free patches.
The remaining shadows are special cases that will need extra attention.
This patch cleans up the Makefile.in files.
We only need to delete config.log in the lower directories.
We reference the *.in files at $(srcdir)/
We need to make distclean for the tgt-(fpga,pal,verilog) directories.
This is to cleanup the Makefile.
Add some missing "rm -r f dep"
Collapse all the configure checks to a single configure script in
the root of the source tree. This makes the configure process run
a lot faster, expecially on Windows systems that are slower in general.
Remove the #ident and $Log$ strings from all the header files and
almost all of the C/C++ source files. I think it is better to get
this done all at once, then to wait for each of the files to be
touched and edited in unrelated patches.
Tran islands are a kinds of island, so seperate the tran handling
from the core island concept. This will allow for creating new
kinds of islands. (Think analog.)
This patch adds the procedural power function %pow/s for signed
values. This has bit based inputs and outputs, but uses the double
pow() function to calculate the value.
This patch removes the CVS ident information from the Makefile.in
files it also puts in the current version 0.9.devel for the default
VERSION definition. This is normally passed down, but a local make
will use the value from the local Makefile. This will eventually be
replaced with a file based version to give us just one place to
reliably modify the version.
This patch makes the code generator put the compiler version
information in the vvp output file. It also adds checks in vvp
to verify that this version is compatible with the run time.
I am assuming that a base release 0.9.0, etc. will have a
blank VERSION_TAG. Any change relative to the release will have
a VERSION_TAG.
This patch adds a -V flag to the runtime to print version information.
It also updates the manual page to document this and makes some minor
changes to the iverilog an iverilog-vpi manual pages.
Users expect that vpi_put_value() will keep a copy of the string
that is passed to it. This patch implements this buy copying the
string and then freeing it after the actual put_value call.
This configure option causes the installed commands to have
a suffix string that makes them distinct from other versions
that also have a suffix string. This allows for multiple
installed versions of Icarus Verilog.
Also, move installed C/C++ header files into a subdirectory of
their own under the target include directory, to make clearer
the purpose and source of those files.
Eliminate three "warning: suggest parentheses around assignment used as truth value"
Obviously not needed, but it's easier to add the superfluous parentheses
than remember that these warnings are benign.
The VVP %join function was incorrectly treating the return from a
non-automatic function as a return from an automatic function in
the case that the non-automatic function result was being used as
a parameter to an automatic function. This patch fixes this error.
This patch addresses a number of issues:
Rewrote the $test$plusargs and $value$plusargs routines to have
better error/warning messages, to support runtime strings, to
correctly load bit based values (truncating, padding, negative
value), added support for the real formats using strtod() and
added "x/X" as an alias for "h/H" to match the other part of
Icarus.
Rewrite the vpip_{bin,oct,hex}_str_to_vec4 routines to ignore
embedded "_" characters. Add support for a negative value and
set the entire value to 'bx if an invalid digit is found. A
warning is printed for this case.
Rewrite vpip_dec_str_to_vec4 to ignore embedded "_" characters,
to support a single "x" or "z" constant and to return 'bx if an
invalid digit is found. A warning is printed for this case.
It simplifies the system task/functions error/warning messages.
It removes the signed flag for the bin and dec string conversions.
This was not being used (was always false) and the new negative
value support makes this obsolete.
Add support for a real variable to handle Bin, Oct, Dec and Hex
strings. They are converted into a vvp_vector4_t which is then
converted to a real value.
Add support for setting a bit based value using a real value.
Removed an unneeded rfp signal in vpip_make_reg()
Stephen Williams
Cary R
Martin Whitaker
Larry Doolittle