Commit Graph

52 Commits

Author SHA1 Message Date
Stephen Williams f07577db11 Handle case that delay output is pending when new event arrives
If the delay has an event pending for the current time, then use
that as a reference for calculating the next delay. If that is not
done, then the delay calculated against the wrong reference might
result in zero, and bad results.
2009-11-23 18:27:14 -08:00
Stephen Williams 0018cb38b0 Merge branch 'master' into vvp-net-out-rework
Conflicts:
	vvp/schedule.cc
	vvp/schedule.h
2009-09-05 10:19:20 -07:00
Cary R 2e820ca6f0 Do not schedule a new event if the previous event has the same value.
If the previous event has exactly the same value as this event then
we do not add this event to the event queue.
2009-08-18 14:10:45 -07:00
Stephen Williams 79a5dde7c4 Merge branch 'master' into vvp-net-out-rework 2009-04-28 19:34:31 -07:00
Cary R bbb132aaa7 Vec8 delays should schedule like vec4 delays.
This patch adds code to calculate the vec8 delays using the
same method that is used to calculate the vec4 delays.
2009-04-28 18:57:23 -07:00
Stephen Williams 6d34b41dce Hide the "out" member of the vvp_net_t object.
The out pointer of a vvp_net_t object is going to be a bit more
sophisticated when we redo the handling of net signals. Take a step
towards this rework by making the pointer private and implementing
methods needed to access it.
2009-04-03 20:40:26 -07:00
Cary R bb799e7e8f SDF files can have null delays.
A SDF file can have null delays and for that case you are to use
the existing delay value (do not change it). This patch adds that
functionality.
2009-02-10 11:47:04 -08:00
Cary R 7b1905b997 Add memory freeing and pool management for valgrind.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).

You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.

With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.

Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
2009-02-01 06:55:28 -08:00
Martin Whitaker 18edf2f15f Rework of automatic task/function support.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.

This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.

This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
2008-10-29 20:43:00 -07:00
Cary R 5463e5e66b More refinements on negative real variable delays.
This should do the rounding correctly on real negative delay
values.
2008-09-14 09:13:03 -07:00
Cary R 441f173ced Variable delays for .delay must be scaled correctly.
A variable that is used to set the delay of a .delay statement
must be scaled to match the local units and for real values
rounded using the precision. This value is then converted to
the simulation precision.
2008-09-14 09:12:53 -07:00
Larry Doolittle 66949122cf Non-controversial whitespace cleanup
Nothing to do with tab width!  Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings.  No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.

Low priority, simple entropy reduction.  Please apply
unless it deletes some steganographic content you want
to keep.
2008-09-04 21:31:30 -07:00
Stephen Williams 4914b734dc Obvious optimizations of vvp_vector8_t handling.
The vvp_vector8_t constructor and destructor involve memory allocation
so it is best to pass these objects by reference as much as possible.

Also have the islands take more care not to perform resolution if the
inputs aren't really different.

NOTE: This is a port of commit 2f4e5bf5b6
from the "performance" branch, without the resolver scheduling changes.
This was causing test suite variances with pr1820472.v. It looks like
there might be a race in that program anyhow, but for now leave out the
resolver scheduling changes so that the rest of this commit can go in.
2008-06-12 12:08:02 -07:00
Cary R 436e2fca13 Add ifnone functionality.
This patch adds ifnone functionality. It does not produce an
error when both an ifnone and an unconditional simple module
path are given. For this case the ifnone delays are ignored.
2008-04-29 11:55:32 -07:00
Stephen Williams 81e12bf7f6 Handle multiple active specify delays.
Fix handling of cases where multiple specified delays are activated
for a given output. Need to apply the standard selection criteria
that gets the minimum value.
2008-04-25 17:17:51 -07:00
Stephen Williams e0fbc15bd4 Support vpiForceFlag and vpiReleaseFlag for nets.
vpi_put_value can mimic force and release with vpiForceFlag and
vpiReleaseFlag flags to the vpi_put_value call. With this patch,
the infrastructure is added to allow the flags argument to be passed
to the dispatched put_value function, and for signals handle those
flags as force/release of a net.
2008-03-10 21:54:58 -07:00
Larry Doolittle 39dd22ace4 Adjust unusual spacing
minimal changes, nearly eliminates oddball/inconsistent
source code use of whitespace
2008-02-19 09:15:03 -08:00
Cary R e7ea90c812 Explicitly initialize real values to 0.0.
This patch explicitly initializes real values to 0.0. Not doing
this was creating an intermittent time zero value problem.
2008-02-15 15:12:55 -08:00
Cary R 4d8db7b5bc Clean pulse events for real signals.
This patch cleans pulse events for real signals. Not doing this
can produce invalid results under some conditions.
2008-02-13 15:43:19 -08:00
Cary R fa759c1802 Fix problem with delay at t0 when only some of the bits change.
This patch makes sure the delay is calculated correctly when only some
of the bits change and you are comparing against the initial (t0) value.
Basically you have to check the initial value against all the bits in
the new signal not just the first bit since the order that bits change
is not deterministic.
2008-01-31 16:42:51 -08:00
Larry Doolittle d9ac146b8f Spelling fixes
only comments and documentation
some punctuation and capitalization for good measure
Changelogs are purposefully untouched
2008-01-29 20:24:24 -08:00
Stephen Williams db25bba0d0 Fix assertion fail handling certain conditional delays
When conditional delays are in use, it is sometimes possible for there
to be no delays available for a given input event. In that case, skip
the delay processing for that case instead of crashing.
2008-01-21 19:57:17 -08:00
Larry Doolittle eb5e7b792b Spelling fixes
Sorry, I can't help myself.  :-p
2008-01-08 17:26:55 -08:00
Larry Doolittle 8ea3b6b0b8 header includes for gcc-4.3 compatibility
minimal changes required to build without error
tested with gcc-4.3 (Debian 4.3-20071130-1) 4.3.0 20071130 (experimental)
2008-01-04 16:14:44 -08:00
Larry Doolittle 25ad1c174a Clean up compiler warnings
stupid changes to shut up the compiler
tested with gcc-4.2.2
2008-01-04 15:57:09 -08:00
Stephen Williams a14d836be3 Support annotation of edge paths
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
2007-12-13 20:42:06 -08:00
Stephen Williams 4986e550b1 Pass SDF delays into simulation
Pass parsed SDF delays into the vvp run time as vpiScaledRealTime
variables, and handling the mapping of 2-values to 12-delays.

Signed-off-by: Stephen Williams <steve@icarus.com>
2007-11-22 17:34:51 -08:00
Stephen Williams d7a0f48944 VPI put and get of delays to module path
Add support for access to delays via scaled real times.

Signed-off-by: Stephen Williams <steve@icarus.com>
2007-11-10 19:54:21 -08:00
Stephen Williams 859d8b3502 Rework vpi_get_delay of modpaths
Cleanup klunky implementation of vpi_get/put_delays for modpath
objects. Remove some useless members.

Signed-off-by: Stephen Williams <steve@icarus.com>
2007-11-06 20:26:03 -08:00
Stephen Williams 5bcbd09ed9 Make the modpath source define the VPI modpath object.
The modpath source node defines the modpath object, and carries the
nodes for the source expression. The modpath outputs are references
by pointers to the vpiModPath that is not in itself a vpi object
any more. This makes the VPI view of a module path look like the
source-destinaiton pair that is the IEEE1364 description of the
modpath.
2007-11-05 19:58:20 -08:00
Stephen Williams 68cf5baba5 Out path term for modpaths
Add vvp support for modpath path term outputs. This also introduces
the concept of path terms and moves towards the path term in general
for getting at the endpoits of a modpath.
2007-11-02 19:59:08 -07:00
Stephen Williams 148e6768f6 Clean up modpath vpi interface
Clean up rather poorly written modpath vpi support, fixing the
parse of the modpath syntax element to not use pointless globals.
Collect the modpath code into the delay.cc file instead of the
inapropriate vpi_signal.cc source file.

Signed-off-by: Stephen Williams <steve@icarus.com>
2007-10-30 20:14:40 -07:00
yang yun ju 9d39b3a514 Access to modpaths via VPI
Add support for accessing the modpath nodes via PLI,
and add support for the vpi_set_delays and vpi_put_delays
functions to set the delays on those paths.

- GSoC 2007
2007-09-10 15:30:00 -07:00
steve 6f810e0dba Assert that modpath finds a delay. 2007-03-04 06:26:58 +00:00
steve fc9a90c9e0 Add support for edge sensitive spec paths. 2007-03-02 06:13:22 +00:00
steve 243cf94165 Add support for conditional specify delay paths. 2007-03-01 06:19:38 +00:00
steve 8e1c7e2891 More literal implementation of inertial delay model. 2007-01-26 05:15:41 +00:00
steve 6593b603ad Modpath delay chooses correct delay for edge. 2006-09-29 03:57:01 +00:00
steve 0edb5a7547 Basic support for specify timing. 2006-09-23 04:57:19 +00:00
steve 5348ac14a5 Delay object supports real valued delays. 2006-07-08 21:48:00 +00:00
steve b7861fa6e8 Require explicit delay node from source. 2006-01-02 05:32:06 +00:00
steve bebcc05aab Handle very wide % and / operations using expanded vector2 support. 2005-11-10 13:27:16 +00:00
steve bf8b085159 Clean up compiler warnings. 2005-09-20 18:34:01 +00:00
steve 3ac79c294a Implement real valued signals and arith nodes. 2005-07-06 04:29:25 +00:00
steve 7091915b73 Reduce vvp_vector4 copies by using const references. 2005-06-22 00:04:48 +00:00
steve 3607fb584d Support UDP initial values. 2005-06-09 05:04:45 +00:00
steve 42433f4df9 Add support for notif0/1 gates.
Make delay nodes support inertial delay.
 Add the %force/link instruction.
2005-06-02 16:02:11 +00:00
steve 870395e627 Move functor delays to vvp_delay_fun object. 2005-05-14 19:43:23 +00:00
steve 573e07225d Rework the vvp_delay_t class. 2005-04-03 05:45:51 +00:00
steve e4ae832153 Clean up spurious trailing white space. 2004-10-04 01:10:51 +00:00