This patch removes bin32 from the clean targets since it is no
longer user/created. It adds autom4te.cache to the distclean
target in the main directory. It removes the files in driver
that are not created (lexor.c parse.c, etc.). The *.cc.output
files are no longer created so removing them is not needed.
- Add missing dependency of configure on aclocal.m4.
- Remove config stamp files in make distclean (and fix another for
loop in base make distclean that I missed)
- Add stamp files to .gitignore
Use the time stamp file technique recommended by the autoconf manual
to prevent unneccesary rebuilds because of an unchanged config.h.
Uses the automake trick of generating the stamp files in the
_AC_AM_CONFIG_HEADER_HOOK macro instead of littering the source
directory with stamp-h.in files.
Add an extra ./config.status run after ./config.status --recheck
because with --recheck it doesn't actually try to remake the generated
files (and thus doesn't make the timestamp files). Thus without the
extra run, each stamp-*-h target would need to independently run
./config.status to make sure it wasn't changed by the configuration
change.
An orthogonal fix of how config.status is called in subdirectories.
When in a subdirectory and config.status is called with
../config.status and $(srcdir) is a relative path, config.status gets
confused. Fixed by replacing '../config.status --file=Makefile.in'
with 'cd ..; ./config.status --file=<dir>/Makefile.in'
We do not want to check an array word scope to see if the scope
was already included since a scope does not include array words.
They must be explicitly specified.
This patch adds $ferror() support. This is enhanced over what the standard
says needs to be supported. All file I/O routines set/clear the errno flag,
This allows $ferror() to check when an invalid fd/MCD is passed to a
system task. The $ferror() fd is only checked if errno is not set since
all the other routines will set EBADF when they are called. This allows us
to test the output from $fopen() which sets the fd to zero (an invalid fd)
when it has a problem.
The following bugs (changes) are also fixed:
Fix $fdisplay*, $fwrite*, $fstrobe*, $fflush, $fclose to not accept 0 as
a valid MCD.
For the $fdisplay*, $fwrite* and $fstrobe tasks an invalid fd/MCD is now
a warning instead of an error like the other file I/O routines.
Modify $fputc() to be a function and return a value like $ungetc().
Modify $ungetc() to return a value like the standard dictates (-1 on
error else 0) and pass the value as a full int to get EOF as an error.
Remove some extra checks that could not happen in $fseek() and to
be safe convert the numeric codes to the system symbolic values.
Skip $fstrobe callback when the fd/MCD is closed. The standard says
we need to cancel the callback, but we currently do not have the
ability to do that so just skipping this will work for now.
Free the argument handle when $fscanf() is called with an invalid fd
(memory leak).
Very minor issues dosify was not closing files so memory leaks could
show up and vpi/sys_readmem.c was passing the file after it was
closed to the lexor cleanup code. The lexor cleanup code does not
need an argument.
The LXT2 writer allows for splitting the output file into multiple
output files. The size of that output file was fixed, but needs to
be controlled by an environment variable.
Make the code smarter so it can keep fewer items in the lists.
Scopes and explicitly given variables are all that is kept.
Includes a few other refinements.
This patch adds support for dumping named events to the VCD
dumper only. The LXT and LXT2 will be added once this has
been tested more. It also reworks the $dumpvars routine
to be more consistent concerning warning messages for duplicate
signal dump requests and fixes some bugs.
For events you will get extra events at T0 and at $dumpon. I
plan to fix this, but that is much more involved.
For duplicate signal warnings. Implicit duplicates loaded
automatically from a scope will not display a warning. Only
an explicit signal request will print a warning if it was
already included. All other will be silently ignored. This
should limit the warning to only what the user cares about.
For example:
$dumpvars(0, var, scope_that_includes_var);
Will work without a warning message.
$dumpvars(0, scope_that_includes_var, var);
Will generate a warning since the var was already included
by the scope request.
Other enhancements include the start of including type
information in the output. For now integer is added, the
other type information will require changes to the code
generator and hence will only be done in development.
This patch removes some of the unneeded differences in the
various dumper routines. This is the start of a complete
refactoring, but the first task is to make them as common
as possible and this is the start of that.
This patch changes the initial buffer size when displaying results
to 512 from 256. This initial buffer is used as the default for the
floating point results and failed when %f is given a large, but
valid value. To make this even more safe we add the precision to
the size to make sure we do not overflow the buffer.
When dumping an array word the name is implicitly converted to
an escaped identifier. If this implicit name conflicts with an
explicitly created escaped identifier this patch will print a
warning message warning that the array word will conflict with
an escaped identifier.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds better error messages (compiletf) for the optional
system tasks and functions (Annex C 1364-2005). Doing this also
makes calling them fail more gracefully (it is no longer a RE).
This patch add a new system function $readmempath. It accepts
a ":" separated list of directories that $readmem{b,h} will
use when trying to open a given file. If the file given to
$readmem{b,h} starts with a '/' (an absolute path) the search
list will not be used. A new call to $readmempath will replace
the previous search list with the given list. The search list
elements are check to see if they exist and are directories.
If not a warning will be displayed and they will not be added
to the list.
When the VAMS math functions were originally built we did a
straight copy of the log() function to $log(). This can
conflict with other Verilog-D definitions of $log. We
need to deprecate this function and remove it before the
next major release.
This patch adds the $fread() system function. Icarus does not
currently allow missing arguments in functions so the following
standard specified functionality is not supported:
res = $fread(mem, fd,,count);
It also fixes a memory leak in fopen related to the get_filename
refactoring I recently did.
(cherry picked from commit 036c176e8b)
This patch adds compiletf routines for the $sscanf/$fscanf
functions. It does not enhance the conversion routines it
only adds better error/warning messages.
It also removed the redundant IS_MCD in some of the fileio
calltf routines. This is already checked in vpi_get_file().
I also added the vpiNetArray type to allow us to distinguish
arrays of nets from other arrays (memories). Much more is
needed here, but this solved the problem of the day. The
problem was that we needed to make sure we could assign to
the word of a variable array, but not the word of a net array.
It's actually probably not needed since Icarus converts the
net array word reference to just the net, but I thought it
prudent to make sure things didn't slip by.
This patch adds compiletf routines for the mti random functions
and adds a common routine to check for extra arguments. It also
adds file and line information to the rest of the compiletf
routines that were missing them.
This patch adds compilef routines for the readmemb/h and
writememb/h system tasks. It also fixes some errors related
to arrays with negative range values. You can not specify a
negative address in the file, but arrays with negative range
values or negative start/finish argument to the tasks are
supported. It also generates an error when reading invalid
character from the input file.
A significant amount of the code is common between the two
styles of tasks so this has been grouped into common
routines.
It also adds a common routine for getting a string that will
be used as a file name. This routine is used by any task
that requires a file name value. If a filename has a
non-printable character it will be displayed as a \octal
constant to show what the character is.
Updates the dumping routines to match each other better,
improves some error messages and fixes a bug in the LXT2
dumper when dumping greater than 32 bit delays.
This patch adds support for the other edges 01, 10, etc. These still
need to be verified in the context of IOPATHs, but they are ignored
in the timing checks and that's what was needed.
This patch updates the compiletf for $sdf_annotate() to better
check the arguments and to display the file and line location
when an error/warning does occur. It does the same for the
calltf messages. It also fixes a couple of subtle bugs.
First we need to look for a NULL string not a NULL value. The
result buffer should always be defined so will never be NULL.
Next if a scope has no modules we should return like the module
was not found (return 0) vs asserting.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
elaborate.cc:2456: warning: suggest parentheses around comparison in operand of &
vpi/vcd_priv.c:210: warning: operation on 'idx' may be undefined
Probable behavior change. Passes testsuite.
This patch cleans up the V-2005 and V-analog math functions to
free their allocated memory at the end of simulation. It also
modifies the veriusertfs code to do the same thing.
It also closes the VCD file at EOS.
This patch fixes some issues in the previous patch. Specifically
I need to use vpi_mcd_printf and some trickery was needed to
prevent the compiler from complaining about the format string.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
This patch modifies $strobe and $fstrobe to use the string
formatting routines. It also combines the $display/$write
and $fdisplay/$fwrite routines into one and removes the
old routines that are no longer needed.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
This patch makes the $fdisplay() and $fwrite() family of task
use the string formatting code. It also adds a compiletf routine
for the tasks and a run time check that the FD or MCD is correct.
If not it fails instead of just dropping the output.
It also cleans up a couple of memory leaks and adds no argument
compiletf routines for the $monitoron/$monitoroff tasks.
Cary R
Jared Casper
Stephen Williams
Purdea Andrei
Larry Doolittle