This patch adds a new system function $vvp_cpu_wordsize. It returns
the size of the underlying CPU word (long) in bits. This function
can be used to write fully portable tests for the test suite. Other
functions will be added as needed.
Verilog-2005 defines the base-10 log function to be $log10. This makes
sense because in C the log() function is the natural log. So add the
$log10 function.
Since there may be legacy code that uses the $log function, leave it
defined, but we should consider at least printing a warning when the
$log function is used.
The va_math.vpi module implements systen-function versions of the
Verilog-A math functions. This library was contributed by Cary R.
Also add the constants.vams include file. This is pretty much
direct from the Verilog-AMS LRM.
Several places in Icarus Verilog try to get the bits of the integer
part of a double by casting to unsigned or unsigned long. But that
causes some compilers to generate smart code that converts all values
less then 0 to 0, even though we are after the bits, not the math
value. So be careful to do this cast only to non-negative values and
uminus the bits if necessary to get exactly what we want.
Signed-off-by: Stephen Williams <steve@icarus.com>
When printing the strength information for a multi bit net this patch
adds an underscore between the individual bit strength values. This
makes it easier to see the individual bit values.
Fallout from me trying to understand the origin of pr1780480
and pr1830834. Too bad I don't understand c++ and vvp as
well as I understand English!
(Spelling and grammer fixes in comments. -ed.)
The sys_funcs table should be left to those functions that are handled
internally by the compiler. Really, the internal sys_funcs table is a
legacy from the days before the compiler supported system function
tables in the .sft format.
This patch modifies the conversion functions $rtoi, $itor,
$realtobits and $bitstoreal calltf routines to be more efficient.
This is done by caching the vpiHandle to the argument in the userdata
pointer. This eliminated the need to get the argument iterator, scan
and free the iterator.
It also updates the error messages to use the new file and line
number information that is available for system functions. It also
adds a check that verifies the functions are only called with one
argument and makes the errors fatal.
tgt-vvp/eval_expr.c uninitialized variables
vpi/sys_display.c uninitialized variables
vvp/vpi_priv.cc deprecated string constant usage
vvp/vpi_vthr_vector.cc deprecated string constant usage
the last entry invokes vpip_name_string() and uses const char *
in the same way as the other 9 callers in vvp/*.cc, the only
difference is that the argument is static instead of computed.
cvs -z3 -d:pserver:anonymous@gtkwave.cvs.sourceforge.net:/cvsroot/gtkwave co -P gtkwave3
delete CVS logs embedded in files
had to add #define wave_alloca alloca to lxt2_write.h
differences remain relative to upstream .h files:
whitespace
value chosen for LXT*_WR_SYMPRIME
Regarding the latter, Tony writes "Don't worry about the .h file.
The only difference is a considerably larger initial hash size.
If this isn't a problem with Icarus now, it certainly doesn't
need to be bumped up."
This patch fixes the calculation of the scope type in draw_scope.
This code is really only used in the VCD dumper so I commented it
out in the other two. The problem was that the lower scope was
used to calculate the scope type. It is also now an error to try
to draw an invalid scope type.
This patch fixes a number of problems associated with the various dumpers.
1. It catches the problem uncovered in pr1809904 and prevents the core
dumps from happening. It prints a warning message if you try to change
the file after the program has started dumping data to the file.
2. It makes all the dumpers work in the same manner. Before the VCD
$dumpfile was processed at compile time, but the LXT/LXT2 versions
did this at run time. The correct place for this is the run time so
that you can pass the task a calculated name.
3. All the dumpers use common compiletf routines located in vcd_priv.c
4. Make the LXT/LXT2 $dumpfile commands only get the file name and
let $dumpvars actually open the file. This matches the VCD code.
5. Fix the $dumpfile code to allow calculated file names.
6. Make dumpvars without a scope/variable match all toplevel modules
not just the toplevel module the $dumpvars was located in. This
now matches the standard (2001).
7. Simplify the no dumper code (vcdoff.c) and add missing functions.
8. Cleanup the code and messages.
9. vvp can take -none for no dumper.
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
The second argument of $sdf_annotate is the scope that is to be
annotated. The argument is optional, and the default is to annotate
the current scope, where the $sdf_annotate is invoked.
Signed-off-by: Stephen Williams <steve@icarus.com>
Handle the special case that the SDF CELL instance is empty. In this
case, the SDF file is requesting the current scope instead of an
instance within the scope.
Signed-off-by: Stephen Williams <steve@icarus.com>
the lexor didn't allow numbers in the IDENTIFIER name,
and the parser wasn't very nice with IDENTIFIER errors.
Signed-off-by: Stephen Williams <steve@icarus.com>
Implement extended vvp command line options to control the amount
of detail that the sdf annotator emits while parsing the source
file.
Signed-off-by: Stephen Williams <steve@icarus.com>
Pass parsed SDF delays into the vvp run time as vpiScaledRealTime
variables, and handling the mapping of 2-values to 12-delays.
Signed-off-by: Stephen Williams <steve@icarus.com>
The LXT and LXT2 formats ignore/work with duplicate variables in
$dumpvars() commands, but VCD output includes extra definitions that
may cause some confusion. This patch checks for duplicates and prints
a warning when they are being suppressed.
It also corrects some error messages in the LXT and LXT2 files to not
reference VCD and some other message cleanup.
GTKWave needs to have escaped identifiers properly escaped (preceded
with a back slash) in its VCD input. Without this the name may not
display correctly. Even though it is not required, to keep things
consistent LXT and LXT2 formats also prefix escaped identifiers with
a back slash.
This patch adds marks at simulation end if needed and enabled (on
and not over the limit) for vcd/lxt/lxt2 files. End of simulation
callbacks also now have the correct simulation time. The default
file names for lxt and lxt2 now match the vcd file except for the
extension. lx2 is also an alias for lxt2 and the default lxt2 file
extension is lx2. This matches what GTKWave expects. Any lxt2
diagnostic output print LXT2 instead of LXT to make it clear which
dumper you are using.
This patch enhances the current fflush implementation to flush a mcd or an
individual fd. Before it always flushed everything. A compiletf routine was
also added.
The attached patch add an implementation for $dumplimit(). It does
not do a hard limit to the file size, but for VCD files it completes
the current time step and puts a comment in the file. For lxt and
lxt2 files the functionality is in place, but because of buffering
the file can be slightly larger than expected.
This patch implements the System Verilog $urandom() and $urandom_range()
functions. There are no check to verify that $urandom_range is only given
unsigned arguments. If you give it a negative value the bit pattern will
be interpreted as a unsigned number.
This patch adds ivl_scope_time_precision() to the compiler which can
be used to extract the local scope precision. tgt-stub and tgt-vvp
have been modified to use this new function and output a value that
is appropriate. The vvp runtime has been altered to use this new
data which is accessed with the vpip_time_precision_from_handle()
function. vpiTimePrecision uses this function to return the correct
precision.
This patch implements the swrite* and sformat system tasks. It also
makes $simtime distinguishable from the other integer time tasks.
This was needed to get the correct time units when $simtime was given
as an argument to $swrite*. The string constant code was also modified
to allow a string to be returned as a vector (0/1 bit pattern).
Here are some more specifics about the swrite* changes.
1. They do not share formatting code with the other display functions,
so they may/will produce different results.
2. All %{alpha} codes allow a width and justification. Others have been
enhanced (%t allows the default width and precision to be overridden,
time functions print with time formatting, better error checking and
messages, etc.).
3. %u and %z formatting codes have been added. It is important to note
that these two formats can produce embedded NULLs, since these
functions are returning a string anything after the first NULL will
not be reachable! memcpy is used instead of regular string processing
where needed so that the original string will contain the total
result. The size returned when the string is created is the true
length. A warning will be printed if a string with embedded NULLs is
produced (strlen() does not match the true length).
4. Real numbers are printed with %g instead of %f.
Once this new formatting code has been evaluated we should incorporate
the changes/fixes into the formatting code for the other functions or
the other functions could be modified to use this new code. The true
string length is available so we should be able to work around the
embedded NULL problem.
The standard states that the seed for the random functions should be
an integer/time variable or a register. This patch fixes the compiletf
routines to check for this. There is also a small patch to
vvp/vpi_signal.cc that removes an assert that was failing and replaces
it with appropriate code. The assert was verifying that the source was
not bigger than an integer. The problem with this is that a time
variable or register may be bigger than an integer. I altered the code
to remove the assert and copy only the lower (8 * sizeof integer) bits.
The potential overflow/loss of precision is not checked. This passes
the regression tests.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds a compiletf routine to the $deposit system task and
simplifies the calltf routine. It also patches the constant string code
to return an appropriate integer value when needed. A number of compiletf
routines that check for this can now be simplified since this (string
constants) no longer causes an assert in an integer environment.
The argument passed to $finish and $stop is not currently used, but it
is now passed down to the functions that may someday do something
useful with it (schedule_finish() and schedule_stop() in vvp/schedule.cc).
Add the missing probabilistic functions and add compiletf routines
for all the functions. The original calltf routines have been
modified as appropriate. The base functions are straight copies
from the standard. I have visually verified the curves with 5,000
points and they look correct.
Even though vpiFinish does not currently do anything with it's
argument I thought it would be best to have them all be in the
correct range [0, 1, 2], so they have been updated as appropriate.
Backslash-escapes are processed early, during elaboration, so that
escaped characters show up in all places with the calculated value.
This means the $display formatting will get processed strings and
should not process back-slashes again.
Signed-off-by: Stephen Williams <steve@icarus.com>
Stephen Williams
Cary R
Larry Doolittle
Martin Whitaker
steve