It turns out that although there was all kinds of code to manage
these members, there were no uses anywhere. It must have been a
legacy from a previous era. So remove the dead code so that it
doesn't confuse me again.
Remove some wasteful and excess scans of the Nexus of some links,
and remove dead code so we can see what we're doing. Also inline
some commonly used and trivial functions.
Once code generation starts, the Nexus structure no longer needs to
support fast insertion/connect operations. So have the code generator
lock down the Nexus structures and adjust the Link lists for optimal
access during readout.
If a signed signal is driving a part select in a CA and the width
is less than 32 bits. the value will be zero extended and will
not work for negative values. This patch adds a warning that this
could happen. This will be fixed in development.
This patch is a major rewrite of the indexed part selects (+: and -:).
It made the following enhancements:
1. Make indexed part selects work correctly with both big and little
endian vectors.
2. Add a warning flag that warns about constant out of bounds/or 'bx
indexed selects.
3. Moved the -: parameter code to its own routine.
4. Added support for straddling before part selects in a CA.
5. Added more assert(! number_is_unknown) statements.
6. Add warning for &PV<> select with a signed index signal that is
less than the width of an int. This will be fixed later.
7. Add support for loading a 'bx/'bz constant into a numeric register.
8. Add a number of signed value fixes to the compiler/code generator.
9. Major fix of draw_select_expr() in the code generator.
This patch adds -g2001-noconfig command line flag. The compiler
already supported this with `begin_keywords. Document this in
the manual page and fix a few other issues.
Fix endgenerate to be a 2001 keyword and add a few missing
keywords at the appropriate standard level e.g.(unsigned).
Add uwire and deprecate wone. wone used to just convert without
a warning to a wire. uwire will display a warning that it is
being converted to a wire without a check. wone is converted to
a uwire with a warning and then prints the uwire message. The
uwire message will be replaced with a real check fairly soon.
In 1364-2005 it is an explicit error to take the select of a scalar
or real value. We added the checks for real a while ago. This patch
adds the functionality for scalar values. In the future we may want
to push the scalar property to the run time.
When a pin array is virtual, dll_target::signal() doesn't need
to make a corresponding set of stub nexa.
This patch includes new detection of oversized arrays, configurable
with the ARRAY_SIZE_LIMIT flag. This limit only applies to devirtualized
arrays; virtual arrays are only limited by your architecture's
unsigned int type.
The concept and earlier versions of this patch have been successfully
stress-tested by multiple people. This one causes no testsuite
regressions on my machine.
Closes: pr2023076
Reduces resource usage when compiling large memories.
Normal usage patterns still create large nexus arrays
in t-dll.cc:dll_target::signal().
This patch is extensively tested; it shouldn't break anything.
The existing debug "optimizer" flag is (ab)used to control
message printing when large (>1000 element) arrays are
devirtualized or nexus-ized.
The new global variable disable_virtual_pins is available
to force allocation of Pin arrays when they are declared,
but no user interface is provided.
See extensive discussion on iverilog-devel, March 4-5 2009,
title "pr2023076: large memories".
Limit memory sizes to whatever fits in unsigned; crash if
the conversion from unsigned long to unsigned overflows,
instead of just wrapping. I don't know what happens on
a 32-bit machine if you ask for an 8 Gig memory, but with
a 64-bit machine and this patch, it crashes with an assert.
Set direction on PartSelect Links before connecting them.
May or may not be considered orthogonal to upcoming
memory virtualization patches.
Previously Icarus normalized the results so array [7:0] would
be the same as array [0:7]. This works just fine for
simulation, but the VPI calls can select the left or right
value and this was incorrect for the [7:0] case since it was
being normalized to [0:7]. This patch swaps the two values in
the a.out file and from this creates the previous first/last
values and a new flag that can be used to get the correct
left and right values for the VPI interface.
Seemingly does nothing, just refactors to create two new methods:
bool NetPins::is_linked(void)
void NetNet::initialize_value_and_dir(verinum::V init_value, Link::DIR dir)
and rearranges netlist.h.
This patch causes no regression in the testsuite.
It smooths the way for any attempt to address pr2023076.
Finish cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in the test suite.
This is the end of the simple, coordination-free patches.
The remaining shadows are special cases that will need extra attention.
This fixes up the elaboration of binary expressions found in
parameter expressions. Parameter expressions are special because
they elaborate early, before all the other parameters are necessarily
completed.
Signals may have VMA disciplines attached. Make the attached discipline
visible through the ivl_target.h API. Also, re-arrange the internal
handling of the discipline structure so that we can expose disciplines
through the ivl_target C API without creating new structures. The
t-dll-api implementations of the discipline access functions can look
at the elaborated discipline structure directly. This is possible since
the discipline parse and elaboration are very simple.
Now that NetNet objects in NetScopes are kept in a map, remove the
linked list for scanning them. This improves the lookup process from
an O(e**N) process to more like O(log(N)). This matters for very
large designs.
Get at least basic elaboration of analog processes and contribution
statements. Bring the statements and analog statements together and
net future elaboration work sort out which statements are valid in
a given context. This makes sense because there really is a lot of
syntactic overlap, and analog behavioral code is processed somewhat
sequentially.
Put together the infrastructure for elaborating analog statements,
including create the NetAnalogTop objects that hold analog statements
and are in turn held by the design.
While doing this, clean up the various unique initial/always enumerations
to use the ivl_process_type_t type.
The signedness of comparison expressions is typically unsigned, even if
the comparison to be performed is signed. The comparison (and particularly
the expr_synth of the comparison) needs to account for this explicitly.
Start cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. YMMV.
The arguments to bitwise operators are padded if *either* of the operands
is unsigned. This is according to the sign/unsigned expression rules
of Verilog, and also matches the behavior of the "Big-3."
The addition of UINT_MAX in netlist.cc requires #include <climits> when compiling with gcc-4.3.2.
I also noticed that commit 8704e3e used c style includes in c++ sources contrary to the style used in the rest of the c++ code and fixed those.
Remove redundant pointer to the containing NetPins object by keeping
the pointer only in the first Link (pin 0) of an array of links. In
this link, replace the pin number with the NetPins pointer, and set
a pins_zero_ flag to indicate that this has happened. This way, only
the first pin in a Link array will have the pointer to the NetPins
that contains the array, and the pointer takes up practically no space
at all.
This class was old, and its original design pulled literally from
the LPM reference. But of nine pins declared, only 4 were used.
Remove all the excess junk and clean up the designed dump handling
of the device.
This patch moves the always zero or possibly zero delay checks
to a point after the circuit is full elaborated. Before it
could try to check tasks that had not already been evaluated
resulting in a crash.
When looking for a delay_type() in a block stop when we have a
DEFINITE_DELAY. Doing this could reduce the number of statements
that need to be checked.
It is legal for a task to have no definition. In that case, the
delay_type calculations (used to detect infinite loops) can assume
that an empty definition is a no-op and return NO_DELAY.
The NetBranch object is connected, but not like an object, so the
NetPins object base class is factored out from NetObj to handle the
connectivity, and the NetBranch class uses the NetPins to connect a
branch.
Also, account for the fact that nets with a discipline are by default
real-valued.
This patch adds .cast/int and updates .cast/real to act as a local
(temporary) net and to support either a signed or unsigned input.
The vvp_vector4_t class not can convert an arbitrarily sized double
to a vector value. This removes the restriction of lround().
Also document the new statements.
Stephen Williams
Cary R
Larry Doolittle
Jared Casper
Martin Whitaker