This patch fixes a number of problems related to the divide and
modulus operators.
The net version (CA) of modulus did not support a signed version.
Division or modulus of a value wider than the machine word did
not correctly check for division by zero and return 'bx.
Fixed a problem in procedural modulus. The sign of the result is
only dependent on the L-value.
Division or modulus of a signed value that was the same width as
the machine word was creating an incorrect sign mask.
Division of a signed value that would fit into a single machine
word was not checking for division by zero.
Division or modulus of a wide value was always being done as
unsigned.
Added a negative operator for vvp_vector2_t. This made
implementing the signed wide division and modulus easier.
It is possible for signe-extend to have a delay attached to it. (Same
for repeat.) Handle it like other LPM devices, by stuffing a .delay
device into the output path of the device, if appropriate.
This patch pushes the automatic property for both tasks and
functions to the code generators. The vvp back end does not
currently support this so it will error out during code
generation. The VHDL back end should be able to use this
property and tgt-stub prints the property. Having this will
also make it easier when we do adding this to the runtime.
This patch fixes a bug in the VVP code generator that causes syntactically
incorrect code to be generated if an event expression contains a memory or
array port.
This patch adds .cast/int and updates .cast/real to act as a local
(temporary) net and to support either a signed or unsigned input.
The vvp_vector4_t class not can convert an arbitrarily sized double
to a vector value. This removes the restriction of lround().
Also document the new statements.
This handles the general case of a non-real operand to a real-valued
division. This can turn up if only 1 operand of a divide is real. In
this case the division as a whole is real and the other operand must
be cast to real.
This method creates an extra node, but it should be a very compact
node and this node does no evaluation tricks so in the run time should
be no more expensive then folding the cast into the .arith/div.r itself.
Actually, the immediate value handling is a little chaotic and should
be cleaned up. This patch opens the door for allowing signed immediate
values, and uses them in a few places where they are explicitly handled.
We must go through the opcodes that can take immediate values and make
explicit whether they are signed/unsigned/etc, and what their size
limits are.
Fold the bi-directional part select into the pass switch (tran) support
so that it can be really bi-directional. This involves adding a new
tranvp device that does part select in tran islands, and reworking the
tran island resolution to handle non-identical nodes. This will be needed
for resistive tran devices anyhow.
The draw_net_input function is modified to account for nexus that is
a port of an island. Draw the ports (and the islands if necessary)
to the island and use the port output for the nexus instead of the
port input. This allows the bi-directional behavior of the port to
interpose itself in the data flow.
In this process of these changes, the draw_net_input function was
reorganized, and all the considerable amount of code for it was
moved to a file of its own. (vvp_scope.c is pretty unruly.)
The MinGW system() implementation appears to return the straight
return value instead of the waitpid() like result that more
normal systems return. Because of this just return the system()
result without processing for MinGW compilations.
Older version of the MinGW runtime (pre 3.14) just used the
underlying vsnprintf(). Which has some problems. The 3.14 version
has some nice improvements, but it has a sever bug when processing
"%*.*f", -1, -1, <some_real_value>. Because of this we need to use
the underlying version without the enhancements for now.
snprintf prints %p differently than the other printf routines
so use _snprintf to get consistent results.
Only build the PDF files if both man and ps2pdf exist.
MinGW does not know about the z modifier for %d, %u, etc.
Add some missing Makefile check targets.
The draw_input_from_net function was being used to access words of
a var array, which doesn't work. Have the draw_input_from_net punt
on that case, and by the way the mux inputs don't need to use that
function, instead they should use the general draw_net_input function
to get the input labels.
Save tons of space per memory word by not creating a vpi handle for
each and every word of a variable array. (Net arrays still get a
vpiHandle for every word.) The consequence of this is that all
accesses to a variable array need to go through the indexing.
This commit handles the most common places where this impacts, but
there are still problems.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
This patch adds code to push the file and line information
for scope objects (modules, functions, tasks, etc.) to the
runtime. For modules, this includes the definition fields.
vvp did not have the ability to handle real parameters.
This patch fixes that omission. Parameters are only used
by vpi calls to get compile time information.
This patch adds support for delaying constants at time zero. It also
cleans up the code in elab_net.cc to use this capability instead of
building it with an extra BUFZ to carry the delay information.
This patch adds the power operator for signed bit based values
in a continuous assignment. It also fixes a few other power
expression width problems. The expression width is still not
calculated correctly, since the correct method can produce huge
possible bit widths. The result is currently limited to the width
of the native long. This is because lround() is used to convert
from a double to an integer. A check in the code generator protects
the runtime from this limitation.
This patch adds the power operator for unsigned bit based values
in a continuous assignment. It also refactors the power code for
normal expressions and continuous assignments.
User functions called in a continuous assignment were not getting
their scope mangled. This is needed to handle arrayed instances and
possibly other things.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
This patch add delays in continuous assignments for the shift operators,
concatenations and replications. It also reports an error if the user
attempts to take the modulus of a real value.
This patch uncovers a couple other problems in the system. I am trying
to fix one of them. I will report the other problem shortly.
This patch fixes some of the delays in bit based continuous
assignments (unary -, unary +constants, string constants,
reduction operators and user functions).
Use draw_lpm_output_delay() in all functions that need it.
When used in continuous assignments, user defined functions may have
delayed output. Handle that by generating the proper .delay node when
needed to delay the output of a .ufunc node.
Previously only the logical operators (~, &, |, ^, etc.) supported a
delayed value in a continuous assignment. This patch should extend this
to all operators. An extensive check of real values was done. The same
will be done shortly for bit based nets.
Checks for constructs currently unsupported in continuous assignments
provide a more explicit message (** operator, real user functions,
{!, && and ||} operators with a real argument).
Rework the encoding of a real value in the Cr<> label to be similar to
the format used by the %loadi/wr instruction. This mantissa-expoment
format better carries all the bits of the desired real value with
plenty of fidelity and range.
Rework the ivl_file_table_* interface to be more generic and easier
to use. Also all the vvp examples except for memory.vvp have been
fixed to run correctly with the current vvp. Someone with a bit more
experience will need to fix memory.vvp.
With this change, local symbols are not emitted in the vvp target,
but are marked as local. When thus marked, the vvp run time does not
offfer any VPI access and the signals (net or var) are effectively
invisible.
CMOS gates like NMOS and PMOS have a strength aware output.
They were missed when the NMOS and PMOS were fixed. "cmos.v"
will now pass in the test suite.
Modpaths need to be in the proper scope in order to be available to
vpi functions. The code generator manages that by writing the modpath
records with scope switch functions. Batch the modpath records at the
end of the structural stuff so that the scope switching doesn't cause
trouble.
Also seperate the modpath code into its own source file.
Signed-off-by: Stephen Williams <steve@icarus.com>
Constant propagation incorrectly elided an entire constant net node
if only the LSB of the driven vector was HiZ. This caused the entire
vector to look like HiZ. Also, the code generator for writing the
constant values missed bits.
Signed-off-by: Stephen Williams <steve@icarus.com>
Cary R
Stephen Williams
Martin Whitaker
Martin Whitaker
Larry Doolittle