It is possible for the code generator to create .array/port objects
before the .array object that the port refereces, so use the resolv_list
to arrange for binding during cleanup.
The abs() function needs to be able to turn -0.0 into 0.0. This proved
to be too clunky (and perhaps impossible) to do with tests and jumps,
so add an %abs/wr opcode to do it using fabs().
The min/max functions need to take special care with the handling
of NaN operands. These matter, so generate the extra code to handle
them.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
This patch adds code to push the file and line information
for scope objects (modules, functions, tasks, etc.) to the
runtime. For modules, this includes the definition fields.
This patch adds ifnone functionality. It does not produce an
error when both an ifnone and an unconditional simple module
path are given. For this case the ifnone delays are ignored.
Remove dependencies on vvp_bit4_encoding outside of the vvp_net
core types. The table_functor_s class was the worst offfender and
was barely used, so it is now removed completely. There are a few
opcodes in vhtread.cc that also make vvvp_bit4_t encoding
assumptions (and used casts) and those have been fixed. There
were also various VPI interface functions that are fixed.
This patch adds the ability to assign/deassign a bit or part select.
It also cleans up the code and fixes some problem in the forcing of
strength aware nets.
This patch adds a %assign/av/d opcode. This is a version of %assign/av
that allows a delay expression. Ultimately this allows a dynamically
indexed array to have a delay expression (non-constant delay value).
vvp did not have the ability to handle real parameters.
This patch fixes that omission. Parameters are only used
by vpi calls to get compile time information.
This patch adds functionality to do a bit or part select release
when a constant value is forced to the net/register. It also adds an
error message when the user tries to force a signal to a bit/part
select. This is not currently handled by the run time, so is now
caught in the compiler (tgt-vvp). Where when this functionality is
needed, it will be easy to know what to do instead of trying to track
down some odd runtime functionality.
What this all means is that you can force a signal to an entire
signal or you can force a constant to any part of a signal (bit,
part or entire) and release any of the above. Technically the
release of a constant value does not have to match the force.
The runtime verifies that if you are releasing a signal driver
it is being done as a full release. I don't see an easy way to
check this in the compiler.
To fix the signal deficiencies we need to rework the force_link
code to allow multiple drivers and partial unlinking. Much of
this is in the runtime, but the %force/link operator may also
need to be changed like I did to the %release opcode.
This patch reworks much of the ternary code to short circuit when
possible and supports real values better. It adds a blend operator
for real values that returns 0.0 when the values differ and the value
when they match. This deviates slightly from the standard which
specifies that the value for reals is always 0.0 when the conditional
is 'bx. There are also a couple bug fixes.
These fixes have not been ported to continuous assignments yet.
Ternary operators used at compile time and in procedural assignments
should be complete (short circuit and support real values).
This patch adds the power operator for signed bit based values
in a continuous assignment. It also fixes a few other power
expression width problems. The expression width is still not
calculated correctly, since the correct method can produce huge
possible bit widths. The result is currently limited to the width
of the native long. This is because lround() is used to convert
from a double to an integer. A check in the code generator protects
the runtime from this limitation.
This patch adds the power operator for unsigned bit based values
in a continuous assignment. It also refactors the power code for
normal expressions and continuous assignments.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
Rework the encoding of a real value in the Cr<> label to be similar to
the format used by the %loadi/wr instruction. This mantissa-expoment
format better carries all the bits of the desired real value with
plenty of fidelity and range.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
Add the vpiFile and vpiLineNo properties to system functions.
Most other objects have stubs that return "N/A"/0. Interactive
functions (called from the debugger) use <interactive> for the
file name.
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
Where and expression is an immediate value added to a signal value,
it is possible to optimize them to a single instruction that combines
the load with an add at the same time.
The modpath source node defines the modpath object, and carries the
nodes for the source expression. The modpath outputs are references
by pointers to the vpiModPath that is not in itself a vpi object
any more. This makes the VPI view of a module path look like the
source-destinaiton pair that is the IEEE1364 description of the
modpath.
Add vvp support for modpath path term outputs. This also introduces
the concept of path terms and moves towards the path term in general
for getting at the endpoits of a modpath.
Clean up rather poorly written modpath vpi support, fixing the
parse of the modpath syntax element to not use pointless globals.
Collect the modpath code into the delay.cc file instead of the
inapropriate vpi_signal.cc source file.
Signed-off-by: Stephen Williams <steve@icarus.com>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <steve@icarus.com>
Add support for accessing the modpath nodes via PLI,
and add support for the vpi_set_delays and vpi_put_delays
functions to set the delays on those paths.
- GSoC 2007
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <steve@icarus.com>
The runtime is a vvp runtime engine debug aid that allows for
detailed dump into a debug log. The trace is enabled by setting
the VVP_DEBUG variable and activating specific debug messages
in the vvp source.
Signed-off-by: Stephen Williams <steve@icarus.com>
more general concept of arrays. The NetMemory and NetEMemory
classes are removed from the ivl core program, and the IVL_LPM_RAM
lpm type is removed from the ivl_target API.
Stephen Williams
Cary R
Larry Doolittle
yang yun ju
steve