Creation of implicit nets requires knowledge of whether an identifier
has been declared before it is used. Currently implicit nets are
created during elaboration, but by this stage the order of declaration
and use is not known. This patch moves the creation of implicit nets
into the parser stage.
Try to put all the version stamps into common version_base.h
and version_stamp.h header files. All the source programs then
get their version from these header files.
Also handle the version stamps in the man pages by using the
version_*.h header file contents to edit the version strings
in the man page title bar markers.
This patch modifies the iverilog -M command line option to allow
the user to specify an optional output mode that controls which
files get added to the dependency list. This allows the user to
either get a list of all files that contribute to the design,
or a list of the include files, or a list of the module files.
This patch adds two new warning classes that can be enabled or
disabled via the -W command line option. The first controls
whether a warning is generated if a part select within an
always @* statement causes the entire vector to be added to
the implicit sensitivity list. The second controls whether a
warning is generated if a word select within an always @*
statement causes the entire array to be added to the implicit
sensitivity list. The first class is not automatically enabled
by -Wall, the second class is.
This patch adds support for a -Wselect-range warning class to the
driver and ivl programs. This is part of -Wall. The actual checks
will be added in a later patch.
This patch is based on one from "bruce <bruce1914@gmail.com>".
I've applied all but the elaboration code, which I rewrote to
properly work with the elaboration work queue. I also constrained
the implementation so that the parameter name must have exactly
two components: the root scope name and the parameter name. This
is necessary to keep the defparm processing sane. The comments
from bruce's original patch are as follows:
--
This patch would provide function to define parameter from command
line. This serves the same functionality as 'defparam' in Verilog
source code, but provide much more ease for using. Parameter
definition can be write in command file, with following syntax:
+parameter+<scope>.<parameter>=<val>
*Do not apply any space between them*
The scope name should be full hierachical name with root name at
the begining. The following example would override test.T1 with
new value 2'b01:
+parameter+test.T1=2'b01
'test' here is the root module name. The parameter value here
should be constant. Parameter definition can also be write in
the command line:
iverilog -Ptest.T1=2'b01
This serves the same functionality with the previous example.
If we define the same parameter in command file and command line,
the one in command line would over-write all others.
This patch cleans up some unneeded code. Releases some allocated
memory before the compiler quits and fixes a couple minor memory
leaks in the compiler and vvp code generator.
This patch adds -g2001-noconfig command line flag. The compiler
already supported this with `begin_keywords. Document this in
the manual page and fix a few other issues.
Fix endgenerate to be a 2001 keyword and add a few missing
keywords at the appropriate standard level e.g.(unsigned).
Add uwire and deprecate wone. wone used to just convert without
a warning to a wire. uwire will display a warning that it is
being converted to a wire without a check. wone is converted to
a uwire with a warning and then prints the uwire message. The
uwire message will be replaced with a real check fairly soon.
This patch adds support for the `resetall directive.
It also changes `celldefine, `endcelldefine and `resetall
to no longer grab text following them. These directives do
not take an argument so they should not be grabbing any
text and silently discarding it.
The `timescale processing was reworked to handle being
reset and hooks were added to easily change the default
time units and precision when we add that feature request.
This patch adds support for recursive module loops if the
loop contains a generate block. The assumption is that the
user is doing the right thing in the generate block to make
the loop terminate. For this case there is also a check
that limits the number of loops (default 10). This prevents
the system from crashing when the user did not correctly
terminate the looping structure. The limit can be changed
by the user if needed.
When a pin array is virtual, dll_target::signal() doesn't need
to make a corresponding set of stub nexa.
This patch includes new detection of oversized arrays, configurable
with the ARRAY_SIZE_LIMIT flag. This limit only applies to devirtualized
arrays; virtual arrays are only limited by your architecture's
unsigned int type.
The concept and earlier versions of this patch have been successfully
stress-tested by multiple people. This one causes no testsuite
regressions on my machine.
Closes: pr2023076
Reduces resource usage when compiling large memories.
Normal usage patterns still create large nexus arrays
in t-dll.cc:dll_target::signal().
This patch is extensively tested; it shouldn't break anything.
The existing debug "optimizer" flag is (ab)used to control
message printing when large (>1000 element) arrays are
devirtualized or nexus-ized.
The new global variable disable_virtual_pins is available
to force allocation of Pin arrays when they are declared,
but no user interface is provided.
See extensive discussion on iverilog-devel, March 4-5 2009,
title "pr2023076: large memories".
Functions that appear in continuous assignment expressions and that
have hidden dependencies or side effects need to be re-evaluated
whenever any input to the expression changes. This patch adds support
in the compiler and vvp runtime to enable this. This is currently
activated for any system function call that has no arguments. The
user may also force it to be used for any user function by passing
the option -gstrict-ca-eval to the compiler driver.
This patch also removes the -dautomatic option which was used for
gaining confidence in the code that supports automatic tasks and
functions. It is believed that the testsuite provides reasonable
fault coverage, and further tests can be added if bugs are found.
This fixes up the elaboration of binary expressions found in
parameter expressions. Parameter expressions are special because
they elaborate early, before all the other parameters are necessarily
completed.
This patch updates the GNU address in the -V output, adds the
VERSION_TAG info to the tgt-vvp back end and adds the whole -V
hook to the tgt-vhdl back end.
The natures of disciplines were already available, this just brings
the information forward to the ivl_target.h API and exposes them via
access functions.
Signals may have VMA disciplines attached. Make the attached discipline
visible through the ivl_target.h API. Also, re-arrange the internal
handling of the discipline structure so that we can expose disciplines
through the ivl_target C API without creating new structures. The
t-dll-api implementations of the discipline access functions can look
at the elaborated discipline structure directly. This is possible since
the discipline parse and elaboration are very simple.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
When the -V flag is passed to the iverilog command, we can easily
print the version information for the driver itself, but it is also
valuable to probe all the components that would have been used for
a real compile. So the driver executes the preprocessor and the ivl
core to have them print version information.
The ivl core program also tries to load the target code generator
and get version information to print. For this to work, create a new
optional entry point "target_query" that takes a query key string as
an argument and returns a const string as the result. Use this with
the key "version" to get version information out of the target.
Target selection is done by the DLL target code generator, so there
is no value having a layer of target selection ahead of it. Remove
all that redundant code and simplify the target config files to reflect
this.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
Modules mentioned within generate schemes are not candidates for
defaults guesses at root modules. They are, obviously, used within
the generate schem.
Rather then join islands while branches are initially created, save the
island creating for the end. This way, the process is actually recursive
and greedy, reliably collecting branches into islands without conflict.
Pform parse enough of the natures that they can be mapped and the
disciplines can bind to them. Since Verilog-AMS expects natures to
be declared before use, we can do the binding early.
Parse discipline declarations, net discipline declarations, and
analog contribution statements. Don't yet do anything useful with
these, just give a sorry message where they are encountered.
IEEE1364 has specific names for the various generations of Verilog that
are supported. Icarus Verilog should stick to those names for selection
the language feature set.
In the process, the extensions that were tied to the 2x generations
are pulled out out and given their own enable flags. The makes all the
feature control more regular and understandable.
Add the -gverilog-ams flag to the driver, and the begin_keywords support
for VAMS-2.3 keywords. With this, the infrastructure is in place to
start pulling in features from Verilog-AMS.
The begin_keywords directive allows the source code to select keyword
subsets so that a bit of code that uses identifiers that class with a
newer version of the standard can still be compiled.
This patch adds check to determine if an always block has delay
in it or not. If there is no delay a runtime infinite loop will
occur. For the indeterminate case it will print a warning message
if the new -Winfloop flag is given. This flag is not part of the
-Wall check!
Rework the handling of file names to use a perm_string heap to hold
the file names, instead of the custom file name heap in the lexor.
Also rename the get_line to get_fileline to reflect its real duties.
This latter chage touched a lot of files.
This patch is rather large and fixes a couple of problems. The major
change is that instead of keeping all the range specifications in
a list that is later processed the information is now kept as
individual entries for the port and net definitions. This allows
easier checking for multiple definitions (pr1660028), more
detailed error messages and the ability to pass the now deprecated
style of a scalar I/O definition used with a vectored net definition.
These changes did require extra code to prevent a single definition
from setting the range values in more than on place.
When using the new ANSI-C style of port declarations (1364-2001 12.3.4
list_of_port_declarations) the compiler ensures that you do not
redeclare the port in the body (it is already completely defined).
This caught a few errors in the test suite (pr859 and sqrt32*).
The flag to disable the normal port checking and allow the deprecated
port syntax is -gno-io-range-error. This will print a warning for the
case of a scalar port with a vectored definition in the body. All
other cases are still considered an error.
Martin Whitaker
Cary R
Stephen Williams
Larry Doolittle
Sreeraj.R
Martin Whitaker
steve