mirror of https://github.com/VLSIDA/OpenRAM.git
Merge branch 'dev' into supply_routing
This commit is contained in:
Matt Guthaus
commit
f8e761313a
|
|
@ -19,9 +19,9 @@ class bitcell_1rw_1r(design.design):
|
|||
design.design.__init__(self, "cell_1rw_1r")
|
||||
debug.info(2, "Create bitcell with 1RW and 1R Port")
|
||||
|
||||
self.width = bitcell.width
|
||||
self.height = bitcell.height
|
||||
self.pin_map = bitcell.pin_map
|
||||
self.width = bitcell_1rw_1r.width
|
||||
self.height = bitcell_1rw_1r.height
|
||||
self.pin_map = bitcell_1rw_1r.pin_map
|
||||
|
||||
def analytical_delay(self, slew, load=0, swing = 0.5):
|
||||
# delay of bit cell is not like a driver(from WL)
|
||||
|
|
@ -38,12 +38,12 @@ class bitcell_1rw_1r(design.design):
|
|||
|
||||
def list_bitcell_pins(self, col, row):
|
||||
""" Creates a list of connections in the bitcell, indexed by column and row, for instance use in bitcell_array """
|
||||
bitcell_pins = ["bl0[{0}]".format(col),
|
||||
"br0[{0}]".format(col),
|
||||
"bl1[{0}]".format(col),
|
||||
"br1[{0}]".format(col),
|
||||
"wl0[{0}]".format(row),
|
||||
"wl1[{0}]".format(row),
|
||||
bitcell_pins = ["bl0_{0}".format(col),
|
||||
"br0_{0}".format(col),
|
||||
"bl1_{0}".format(col),
|
||||
"br1_{0}".format(col),
|
||||
"wl0_{0}".format(row),
|
||||
"wl1_{0}".format(row),
|
||||
"vdd",
|
||||
"gnd"]
|
||||
return bitcell_pins
|
||||
|
|
|
|||
|
|
@ -884,3 +884,19 @@ class pbitcell(design.design):
|
|||
Q_bar_pos = self.inverter_pmos_right.get_pin("S").center()
|
||||
vdd_pos = self.inverter_pmos_right.get_pin("D").center()
|
||||
self.add_path("metal1", [Q_bar_pos, vdd_pos])
|
||||
|
||||
def analytical_delay(self, slew, load=0, swing = 0.5):
|
||||
#FIXME: Delay copied exactly over from bitcell
|
||||
from tech import spice
|
||||
r = spice["min_tx_r"]*3
|
||||
c_para = spice["min_tx_drain_c"]
|
||||
result = self.cal_delay_with_rc(r = r, c = c_para+load, slew = slew, swing = swing)
|
||||
return result
|
||||
|
||||
def analytical_power(self, proc, vdd, temp, load):
|
||||
"""Bitcell power in nW. Only characterizes leakage."""
|
||||
from tech import spice
|
||||
leakage = spice["bitcell_leakage"]
|
||||
dynamic = 0 #temporary
|
||||
total_power = self.return_power(dynamic, leakage)
|
||||
return total_power
|
||||
|
|
@ -807,45 +807,73 @@ class delay(simulation):
|
|||
#Add test cycle of read/write port pair. One port could have been used already, but the other has not.
|
||||
self.gen_test_cycles_one_port(cur_read_port, cur_write_port)
|
||||
|
||||
def analytical_delay(self,sram, slews, loads):
|
||||
def analytical_delay(self, slews, loads):
|
||||
""" Return the analytical model results for the SRAM.
|
||||
"""
|
||||
debug.check(OPTS.num_rw_ports < 2 and OPTS.num_w_ports < 1 and OPTS.num_r_ports < 1 ,
|
||||
"Analytical characterization does not currently support multiport.")
|
||||
if OPTS.num_rw_ports > 1 or OPTS.num_w_ports > 0 and OPTS.num_r_ports > 0:
|
||||
debug.warning("Analytical characterization results are not supported for multiport.")
|
||||
|
||||
delay_lh = []
|
||||
delay_hl = []
|
||||
slew_lh = []
|
||||
slew_hl = []
|
||||
power = self.analytical_power(slews, loads)
|
||||
port_data = self.get_empty_measure_data_dict()
|
||||
for slew in slews:
|
||||
for load in loads:
|
||||
self.set_load_slew(load,slew)
|
||||
bank_delay = sram.analytical_delay(self.vdd_voltage, self.slew,self.load)
|
||||
# Convert from ps to ns
|
||||
delay_lh.append(bank_delay.delay/1e3)
|
||||
delay_hl.append(bank_delay.delay/1e3)
|
||||
slew_lh.append(bank_delay.slew/1e3)
|
||||
slew_hl.append(bank_delay.slew/1e3)
|
||||
bank_delay = self.sram.analytical_delay(self.vdd_voltage, self.slew,self.load)
|
||||
for port in range(self.total_ports):
|
||||
for mname in self.delay_meas_names+self.power_meas_names:
|
||||
if "power" in mname:
|
||||
port_data[port][mname].append(power.dynamic)
|
||||
elif "delay" in mname:
|
||||
port_data[port][mname].append(bank_delay[port].delay/1e3)
|
||||
elif "slew" in mname:
|
||||
port_data[port][mname].append(bank_delay[port].slew/1e3)
|
||||
else:
|
||||
debug.error("Measurement name not recognized: {}".format(mname),1)
|
||||
sram_data = { "min_period": 0,
|
||||
"leakage_power": power.leakage}
|
||||
|
||||
power = sram.analytical_power(self.process, self.vdd_voltage, self.temperature, load)
|
||||
return (sram_data,port_data)
|
||||
|
||||
# delay_lh = []
|
||||
# delay_hl = []
|
||||
# slew_lh = []
|
||||
# slew_hl = []
|
||||
# for slew in slews:
|
||||
# for load in loads:
|
||||
# self.set_load_slew(load,slew)
|
||||
# bank_delay = sram.analytical_delay(self.vdd_voltage, self.slew,self.load)
|
||||
# # Convert from ps to ns
|
||||
# delay_lh.append(bank_delay.delay/1e3)
|
||||
# delay_hl.append(bank_delay.delay/1e3)
|
||||
# slew_lh.append(bank_delay.slew/1e3)
|
||||
# slew_hl.append(bank_delay.slew/1e3)
|
||||
|
||||
# power = self.analytical_power()
|
||||
|
||||
# sram_data = { "min_period": 0,
|
||||
# "leakage_power": power.leakage}
|
||||
# port_data = [{"delay_lh": delay_lh,
|
||||
# "delay_hl": delay_hl,
|
||||
# "slew_lh": slew_lh,
|
||||
# "slew_hl": slew_hl,
|
||||
# "read0_power": power.dynamic,
|
||||
# "read1_power": power.dynamic,
|
||||
# "write0_power": power.dynamic,
|
||||
# "write1_power": power.dynamic,
|
||||
# }]
|
||||
# return (sram_data,port_data)
|
||||
|
||||
def analytical_power(self, slews, loads):
|
||||
"""Get the dynamic and leakage power from the SRAM"""
|
||||
#slews unused, only last load is used
|
||||
load = loads[-1]
|
||||
power = self.sram.analytical_power(self.process, self.vdd_voltage, self.temperature, load)
|
||||
#convert from nW to mW
|
||||
power.dynamic /= 1e6
|
||||
power.leakage /= 1e6
|
||||
debug.info(1,"Dynamic Power: {0} mW".format(power.dynamic))
|
||||
debug.info(1,"Leakage Power: {0} mW".format(power.leakage))
|
||||
|
||||
sram_data = { "min_period": 0,
|
||||
"leakage_power": power.leakage}
|
||||
port_data = [{"delay_lh": delay_lh,
|
||||
"delay_hl": delay_hl,
|
||||
"slew_lh": slew_lh,
|
||||
"slew_hl": slew_hl,
|
||||
"read0_power": power.dynamic,
|
||||
"read1_power": power.dynamic,
|
||||
"write0_power": power.dynamic,
|
||||
"write1_power": power.dynamic,
|
||||
}]
|
||||
return (sram_data,port_data)
|
||||
return power
|
||||
|
||||
def gen_data(self):
|
||||
""" Generates the PWL data inputs for a simulation timing test. """
|
||||
|
|
|
|||
|
|
@ -17,7 +17,6 @@ class lib:
|
|||
self.sram = sram
|
||||
self.sp_file = sp_file
|
||||
self.use_model = use_model
|
||||
#self.gen_port_names() #copy and paste from delay.py, names are not final will likely be changed later.
|
||||
self.set_port_indices()
|
||||
|
||||
self.prepare_tables()
|
||||
|
|
@ -27,30 +26,11 @@ class lib:
|
|||
self.characterize_corners()
|
||||
|
||||
def set_port_indices(self):
|
||||
"""Copies port information set in the SRAM instance"""
|
||||
self.total_port_num = self.sram.total_ports
|
||||
self.read_ports = self.sram.read_index
|
||||
self.write_ports = self.sram.write_index
|
||||
|
||||
def gen_port_names(self):
|
||||
"""Generates the port names to be written to the lib file"""
|
||||
#This is basically a copy and paste of whats in delay.py as well. Something more efficient should be done here.
|
||||
self.write_ports = []
|
||||
self.read_ports = []
|
||||
self.total_port_num = OPTS.num_rw_ports + OPTS.num_w_ports + OPTS.num_r_ports
|
||||
|
||||
#save a member variable to avoid accessing global. readwrite ports have different control signals.
|
||||
self.readwrite_port_num = OPTS.num_rw_ports
|
||||
|
||||
#Generate the port names. readwrite ports are required to be added first for this to work.
|
||||
for readwrite_port_num in range(OPTS.num_rw_ports):
|
||||
self.read_ports.append(readwrite_port_num)
|
||||
self.write_ports.append(readwrite_port_num)
|
||||
#This placement is intentional. It makes indexing input data easier. See self.data_values
|
||||
for read_port_num in range(OPTS.num_rw_ports, OPTS.num_r_ports):
|
||||
self.read_ports.append(read_port_num)
|
||||
for write_port_num in range(OPTS.num_rw_ports+OPTS.num_r_ports, OPTS.num_w_ports):
|
||||
self.write_ports.append(write_port_num)
|
||||
|
||||
def prepare_tables(self):
|
||||
""" Determine the load/slews if they aren't specified in the config file. """
|
||||
# These are the parameters to determine the table sizes
|
||||
|
|
@ -502,7 +482,7 @@ class lib:
|
|||
if not hasattr(self,"d"):
|
||||
self.d = delay(self.sram, self.sp_file, self.corner)
|
||||
if self.use_model:
|
||||
char_results = self.d.analytical_delay(self.sram,self.slews,self.loads)
|
||||
char_results = self.d.analytical_delay(self.slews,self.loads)
|
||||
self.char_sram_results, self.char_port_results = char_results
|
||||
else:
|
||||
probe_address = "1" * self.sram.addr_size
|
||||
|
|
|
|||
|
|
@ -927,14 +927,18 @@ class bank(design.design):
|
|||
|
||||
def analytical_delay(self, vdd, slew, load):
|
||||
""" return analytical delay of the bank"""
|
||||
results = []
|
||||
|
||||
decoder_delay = self.row_decoder.analytical_delay(slew, self.wordline_driver.input_load())
|
||||
|
||||
word_driver_delay = self.wordline_driver.analytical_delay(decoder_delay.slew, self.bitcell_array.input_load())
|
||||
|
||||
#FIXME: Array delay is the same for every port.
|
||||
bitcell_array_delay = self.bitcell_array.analytical_delay(word_driver_delay.slew)
|
||||
|
||||
#This also essentially creates the same delay for each port. Good structure, no substance
|
||||
for port in range(self.total_ports):
|
||||
if self.words_per_row > 1:
|
||||
port = 0 #Analytical delay only supports single port
|
||||
column_mux_delay = self.column_mux_array[port].analytical_delay(vdd, bitcell_array_delay.slew,
|
||||
self.sense_amp_array.input_load())
|
||||
else:
|
||||
|
|
@ -943,7 +947,7 @@ class bank(design.design):
|
|||
bl_t_data_out_delay = self.sense_amp_array.analytical_delay(column_mux_delay.slew,
|
||||
self.bitcell_array.output_load())
|
||||
# output load of bitcell_array is set to be only small part of bl for sense amp.
|
||||
results.append(decoder_delay + word_driver_delay + bitcell_array_delay + column_mux_delay + bl_t_data_out_delay)
|
||||
|
||||
result = decoder_delay + word_driver_delay + bitcell_array_delay + column_mux_delay + bl_t_data_out_delay
|
||||
return result
|
||||
return results
|
||||
|
||||
|
|
|
|||
|
|
@ -199,13 +199,21 @@ class bitcell_array(design.design):
|
|||
return total_power
|
||||
|
||||
def gen_wl_wire(self):
|
||||
wl_wire = self.generate_rc_net(int(self.column_size), self.width, drc("minwidth_metal1"))
|
||||
if OPTS.netlist_only:
|
||||
width = 0
|
||||
else:
|
||||
width = self.width
|
||||
wl_wire = self.generate_rc_net(int(self.column_size), width, drc("minwidth_metal1"))
|
||||
wl_wire.wire_c = 2*spice["min_tx_gate_c"] + wl_wire.wire_c # 2 access tx gate per cell
|
||||
return wl_wire
|
||||
|
||||
def gen_bl_wire(self):
|
||||
if OPTS.netlist_only:
|
||||
height = 0
|
||||
else:
|
||||
height = self.height
|
||||
bl_pos = 0
|
||||
bl_wire = self.generate_rc_net(int(self.row_size-bl_pos), self.height, drc("minwidth_metal1"))
|
||||
bl_wire = self.generate_rc_net(int(self.row_size-bl_pos), height, drc("minwidth_metal1"))
|
||||
bl_wire.wire_c =spice["min_tx_drain_c"] + bl_wire.wire_c # 1 access tx d/s per cell
|
||||
return bl_wire
|
||||
|
||||
|
|
|
|||
|
|
@ -116,7 +116,7 @@ def check_print_output(file_name):
|
|||
return(count)
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ def setup_files():
|
|||
return (gds_dir, gds_files)
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -59,7 +59,7 @@ def setup_files():
|
|||
|
||||
return (gds_dir, sp_dir, allnames)
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@ class contact_test(openram_test):
|
|||
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -84,7 +84,7 @@ class path_test(openram_test):
|
|||
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ class ptx_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ class ptx_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class ptx_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class ptx_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class ptx_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class ptx_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -121,7 +121,7 @@ class wire_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -1,42 +0,0 @@
|
|||
#!/usr/bin/env python3
|
||||
"""
|
||||
Run regresion tests on a parameterized bitcell
|
||||
"""
|
||||
|
||||
import unittest
|
||||
from testutils import header,openram_test
|
||||
import sys,os
|
||||
sys.path.append(os.path.join(sys.path[0],".."))
|
||||
import globals
|
||||
from globals import OPTS
|
||||
import debug
|
||||
|
||||
OPTS = globals.OPTS
|
||||
|
||||
@unittest.skip("SKIPPING 04_bitcell_1rw_1r_test")
|
||||
class bitcell_1rw_1r_test(openram_test):
|
||||
|
||||
def runTest(self):
|
||||
OPTS.bitcell = "bitcell_1rw_1r"
|
||||
globals.init_openram("config_20_{0}".format(OPTS.tech_name))
|
||||
from bitcell import bitcell
|
||||
from bitcell_1rw_1r import bitcell_1rw_1r
|
||||
import tech
|
||||
OPTS.num_rw_ports=1
|
||||
OPTS.num_w_ports=0
|
||||
OPTS.num_r_ports=1
|
||||
debug.info(2, "Bitcell with 1 read/write and 1 read port")
|
||||
#tx = bitcell_1rw_1r()
|
||||
tx = bitcell()
|
||||
self.local_check(tx)
|
||||
|
||||
globals.end_openram()
|
||||
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
header(__file__, OPTS.tech_name)
|
||||
unittest.main()
|
||||
|
|
@ -94,7 +94,7 @@ class pbitcell_test(openram_test):
|
|||
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ class pinv_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ class pinv_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ class pinv_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ class pinv_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ class pinvbuf_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class pnand2_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class pnand3_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@ class pnor2_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ class precharge_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ class replica_pbitcell_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ class single_level_column_mux_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -0,0 +1,37 @@
|
|||
#!/usr/bin/env python3
|
||||
"""
|
||||
Run a regression test on a basic array
|
||||
"""
|
||||
|
||||
import unittest
|
||||
from testutils import header,openram_test
|
||||
import sys,os
|
||||
sys.path.append(os.path.join(sys.path[0],".."))
|
||||
import globals
|
||||
from globals import OPTS
|
||||
import debug
|
||||
|
||||
#@unittest.skip("SKIPPING 05_bitcell_1rw_1r_array_test")
|
||||
|
||||
class bitcell_1rw_1r_array_test(openram_test):
|
||||
|
||||
def runTest(self):
|
||||
globals.init_openram("config_20_{0}".format(OPTS.tech_name))
|
||||
import bitcell_array
|
||||
|
||||
debug.info(2, "Testing 4x4 array for cell_1rw_1r")
|
||||
OPTS.bitcell = "bitcell_1rw_1r"
|
||||
OPTS.num_rw_ports = 1
|
||||
OPTS.num_r_ports = 1
|
||||
OPTS.num_w_ports = 0
|
||||
a = bitcell_array.bitcell_array(name="bitcell_1rw_1r_array", cols=4, rows=4)
|
||||
self.local_check(a)
|
||||
|
||||
globals.end_openram()
|
||||
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
header(__file__, OPTS.tech_name)
|
||||
unittest.main()
|
||||
|
|
@ -25,7 +25,7 @@ class array_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ class pbitcell_array_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -69,7 +69,7 @@ class hierarchical_decoder_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ class hierarchical_predecode2x4_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ class hierarchical_predecode3x8_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ class single_level_column_mux_test(openram_test):
|
|||
globals.end_openram()
|
||||
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ class precharge_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ class wordline_driver_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ class sense_amp_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ class write_driver_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ class dff_array_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ class dff_buf_array_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ class dff_buf_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ class dff_inv_array_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ class dff_inv_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ class tri_gate_array_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ class delay_chain_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -70,7 +70,7 @@ class replica_bitline_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ class control_logic_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -40,7 +40,7 @@ class bank_select_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ class multi_bank_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ class multi_bank_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -137,7 +137,7 @@ class psingle_bank_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ class single_bank_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -128,7 +128,7 @@ class sram_1bank_test(openram_test):
|
|||
"""
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@ class sram_1bank_2mux_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@ class sram_1bank_4mux_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@ class sram_1bank_8mux_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@ class sram_1bank_nomux_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ class sram_2bank_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@ class sram_4bank_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -81,7 +81,7 @@ class timing_sram_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ class timing_setup_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -81,7 +81,7 @@ class timing_sram_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ class timing_setup_test(openram_test):
|
|||
reload(characterizer)
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ class psram_1bank_2mux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ import globals
|
|||
from globals import OPTS
|
||||
import debug
|
||||
|
||||
@unittest.skip("SKIPPING 22_psram_1bank_4mux_func_test")
|
||||
#@unittest.skip("SKIPPING 22_psram_1bank_4mux_func_test")
|
||||
class psram_1bank_4mux_func_test(openram_test):
|
||||
|
||||
def runTest(self):
|
||||
|
|
@ -49,7 +49,7 @@ class psram_1bank_4mux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -37,6 +37,7 @@ class psram_1bank_8mux_func_test(openram_test):
|
|||
c.words_per_row,
|
||||
c.num_banks))
|
||||
s = sram(c, name="sram")
|
||||
tempspice = OPTS.openram_temp + "temp.sp"
|
||||
s.sp_write(tempspice)
|
||||
|
||||
corner = (OPTS.process_corners[0], OPTS.supply_voltages[0], OPTS.temperatures[0])
|
||||
|
|
@ -48,7 +49,7 @@ class psram_1bank_8mux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ class psram_1bank_nomux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@ class sram_1bank_2mux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@ class sram_1bank_4mux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ class sram_1bank_8mux_func_test(openram_test):
|
|||
c.words_per_row,
|
||||
c.num_banks))
|
||||
s = sram(c, name="sram")
|
||||
tempspice = OPTS.openram_temp + "temp.sp"
|
||||
s.sp_write(tempspice)
|
||||
|
||||
corner = (OPTS.process_corners[0], OPTS.supply_voltages[0], OPTS.temperatures[0])
|
||||
|
|
@ -49,7 +50,7 @@ class sram_1bank_8mux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@ class sram_1bank_nomux_func_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ class lib_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ class lib_test(openram_test):
|
|||
reload(characterizer)
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ class lib_test(openram_test):
|
|||
reload(characterizer)
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ class lef_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@ class verilog_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -306,7 +306,7 @@ class sram_func_test(openram_test):
|
|||
sti_file.file.close()
|
||||
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -73,7 +73,7 @@ class worst_case_timing_sram_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copdsay of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
|
|
@ -83,7 +83,7 @@ class openram_test(openram_test):
|
|||
|
||||
globals.end_openram()
|
||||
|
||||
# instantiate a copy of the class to actually run the test
|
||||
# run the test from the command line
|
||||
if __name__ == "__main__":
|
||||
(OPTS, args) = globals.parse_args()
|
||||
del sys.argv[1:]
|
||||
|
|
|
|||
Binary file not shown.
Binary file not shown.
|
|
@ -1,146 +1,148 @@
|
|||
magic
|
||||
tech scmos
|
||||
timestamp 1539900829
|
||||
timestamp 1540504134
|
||||
<< nwell >>
|
||||
rect -18 -1 32 26
|
||||
rect 0 50 54 79
|
||||
<< pwell >>
|
||||
rect -18 -51 32 -6
|
||||
rect 0 0 54 50
|
||||
<< ntransistor >>
|
||||
rect -6 -18 -4 -12
|
||||
rect 2 -24 4 -12
|
||||
rect 10 -24 12 -12
|
||||
rect 18 -18 20 -12
|
||||
rect -6 -36 -4 -28
|
||||
rect 2 -36 4 -28
|
||||
rect 10 -36 12 -28
|
||||
rect 18 -36 20 -28
|
||||
rect 14 35 16 41
|
||||
rect 22 29 24 41
|
||||
rect 30 29 32 41
|
||||
rect 38 35 40 41
|
||||
rect 14 17 16 25
|
||||
rect 22 17 24 25
|
||||
rect 30 17 32 25
|
||||
rect 38 17 40 25
|
||||
<< ptransistor >>
|
||||
rect 2 5 4 9
|
||||
rect 10 5 12 9
|
||||
rect 22 58 24 62
|
||||
rect 30 58 32 62
|
||||
<< ndiffusion >>
|
||||
rect -11 -14 -6 -12
|
||||
rect -7 -18 -6 -14
|
||||
rect -4 -18 -3 -12
|
||||
rect 1 -20 2 -12
|
||||
rect -3 -24 2 -20
|
||||
rect 4 -24 5 -12
|
||||
rect 9 -24 10 -12
|
||||
rect 12 -20 13 -12
|
||||
rect 17 -18 18 -12
|
||||
rect 20 -14 25 -12
|
||||
rect 20 -18 21 -14
|
||||
rect 12 -24 17 -20
|
||||
rect -11 -30 -6 -28
|
||||
rect -7 -34 -6 -30
|
||||
rect -11 -36 -6 -34
|
||||
rect -4 -36 2 -28
|
||||
rect 4 -36 5 -28
|
||||
rect 9 -36 10 -28
|
||||
rect 12 -36 18 -28
|
||||
rect 20 -30 25 -28
|
||||
rect 20 -34 21 -30
|
||||
rect 20 -36 25 -34
|
||||
rect 9 39 14 41
|
||||
rect 13 35 14 39
|
||||
rect 16 35 17 41
|
||||
rect 21 33 22 41
|
||||
rect 17 29 22 33
|
||||
rect 24 29 25 41
|
||||
rect 29 29 30 41
|
||||
rect 32 33 33 41
|
||||
rect 37 35 38 41
|
||||
rect 40 39 45 41
|
||||
rect 40 35 41 39
|
||||
rect 32 29 37 33
|
||||
rect 9 23 14 25
|
||||
rect 13 19 14 23
|
||||
rect 9 17 14 19
|
||||
rect 16 17 22 25
|
||||
rect 24 17 25 25
|
||||
rect 29 17 30 25
|
||||
rect 32 17 38 25
|
||||
rect 40 23 45 25
|
||||
rect 40 19 41 23
|
||||
rect 40 17 45 19
|
||||
<< pdiffusion >>
|
||||
rect 1 5 2 9
|
||||
rect 4 5 5 9
|
||||
rect 9 5 10 9
|
||||
rect 12 5 13 9
|
||||
rect 21 58 22 62
|
||||
rect 24 58 25 62
|
||||
rect 29 58 30 62
|
||||
rect 32 58 33 62
|
||||
<< ndcontact >>
|
||||
rect -11 -18 -7 -14
|
||||
rect -3 -20 1 -12
|
||||
rect 5 -24 9 -12
|
||||
rect 13 -20 17 -12
|
||||
rect 21 -18 25 -14
|
||||
rect -11 -34 -7 -30
|
||||
rect 5 -36 9 -28
|
||||
rect 21 -34 25 -30
|
||||
rect 9 35 13 39
|
||||
rect 17 33 21 41
|
||||
rect 25 29 29 41
|
||||
rect 33 33 37 41
|
||||
rect 41 35 45 39
|
||||
rect 9 19 13 23
|
||||
rect 25 17 29 25
|
||||
rect 41 19 45 23
|
||||
<< pdcontact >>
|
||||
rect -3 5 1 9
|
||||
rect 5 5 9 9
|
||||
rect 13 5 17 9
|
||||
rect 17 58 21 62
|
||||
rect 25 58 29 62
|
||||
rect 33 58 37 62
|
||||
<< psubstratepcontact >>
|
||||
rect 5 -44 9 -40
|
||||
rect 25 9 29 13
|
||||
<< nsubstratencontact >>
|
||||
rect 5 19 9 23
|
||||
rect 25 72 29 76
|
||||
<< polysilicon >>
|
||||
rect 2 9 4 11
|
||||
rect 10 9 12 11
|
||||
rect 2 -5 4 5
|
||||
rect 10 2 12 5
|
||||
rect 11 -2 12 2
|
||||
rect -6 -12 -4 -7
|
||||
rect 2 -9 3 -5
|
||||
rect 2 -12 4 -9
|
||||
rect 10 -12 12 -2
|
||||
rect 18 -12 20 -7
|
||||
rect -6 -20 -4 -18
|
||||
rect 18 -20 20 -18
|
||||
rect -6 -28 -4 -27
|
||||
rect 2 -28 4 -24
|
||||
rect 10 -28 12 -24
|
||||
rect 18 -28 20 -27
|
||||
rect -6 -38 -4 -36
|
||||
rect 2 -38 4 -36
|
||||
rect 10 -38 12 -36
|
||||
rect 18 -38 20 -36
|
||||
rect 22 62 24 64
|
||||
rect 30 62 32 64
|
||||
rect 22 48 24 58
|
||||
rect 30 55 32 58
|
||||
rect 31 51 32 55
|
||||
rect 14 41 16 46
|
||||
rect 22 44 23 48
|
||||
rect 22 41 24 44
|
||||
rect 30 41 32 51
|
||||
rect 38 41 40 46
|
||||
rect 14 33 16 35
|
||||
rect 38 33 40 35
|
||||
rect 14 25 16 26
|
||||
rect 22 25 24 29
|
||||
rect 30 25 32 29
|
||||
rect 38 25 40 26
|
||||
rect 14 15 16 17
|
||||
rect 22 15 24 17
|
||||
rect 30 15 32 17
|
||||
rect 38 15 40 17
|
||||
<< polycontact >>
|
||||
rect 7 -2 11 2
|
||||
rect -10 -11 -6 -7
|
||||
rect 3 -9 7 -5
|
||||
rect 20 -11 24 -7
|
||||
rect -8 -27 -4 -23
|
||||
rect 18 -27 22 -23
|
||||
rect 27 51 31 55
|
||||
rect 10 42 14 46
|
||||
rect 23 44 27 48
|
||||
rect 40 42 44 46
|
||||
rect 12 26 16 30
|
||||
rect 38 26 42 30
|
||||
<< metal1 >>
|
||||
rect -18 19 5 23
|
||||
rect 9 19 32 23
|
||||
rect -18 12 32 16
|
||||
rect -10 -7 -6 12
|
||||
rect -3 2 0 5
|
||||
rect -3 -2 7 2
|
||||
rect -3 -12 0 -2
|
||||
rect 14 -5 17 5
|
||||
rect 7 -9 17 -5
|
||||
rect 14 -12 17 -9
|
||||
rect 20 -7 24 12
|
||||
rect -14 -18 -11 -14
|
||||
rect 25 -18 28 -14
|
||||
rect 5 -28 9 -24
|
||||
rect 5 -40 9 -36
|
||||
rect -17 -44 5 -40
|
||||
rect 9 -44 31 -40
|
||||
rect -17 -51 -4 -47
|
||||
rect 0 -51 14 -47
|
||||
rect 18 -51 31 -47
|
||||
rect 0 72 25 76
|
||||
rect 29 72 54 76
|
||||
rect 0 65 54 69
|
||||
rect 10 46 14 65
|
||||
rect 17 55 20 58
|
||||
rect 17 51 27 55
|
||||
rect 17 41 20 51
|
||||
rect 34 48 37 58
|
||||
rect 27 44 37 48
|
||||
rect 34 41 37 44
|
||||
rect 40 46 44 65
|
||||
rect 6 35 9 39
|
||||
rect 45 35 48 39
|
||||
rect 25 25 29 29
|
||||
rect 25 13 29 17
|
||||
rect 0 9 25 13
|
||||
rect 29 9 54 13
|
||||
rect 0 2 16 6
|
||||
rect 20 2 34 6
|
||||
rect 38 2 54 6
|
||||
<< m2contact >>
|
||||
rect 5 19 9 23
|
||||
rect 5 5 9 9
|
||||
rect -18 -18 -14 -14
|
||||
rect -4 -27 0 -23
|
||||
rect 28 -18 32 -14
|
||||
rect 14 -27 18 -23
|
||||
rect -11 -34 -7 -30
|
||||
rect 21 -34 25 -30
|
||||
rect -4 -51 0 -47
|
||||
rect 14 -51 18 -47
|
||||
rect 25 72 29 76
|
||||
rect 25 58 29 62
|
||||
rect 2 35 6 39
|
||||
rect 16 26 20 30
|
||||
rect 48 35 52 39
|
||||
rect 34 26 38 30
|
||||
rect 9 19 13 23
|
||||
rect 41 19 45 23
|
||||
rect 16 2 20 6
|
||||
rect 34 2 38 6
|
||||
<< metal2 >>
|
||||
rect -18 -14 -14 23
|
||||
rect -18 -51 -14 -18
|
||||
rect -11 -30 -7 23
|
||||
rect 5 9 9 19
|
||||
rect -11 -51 -7 -34
|
||||
rect -4 -47 0 -27
|
||||
rect 14 -47 18 -27
|
||||
rect 21 -30 25 23
|
||||
rect 21 -51 25 -34
|
||||
rect 28 -14 32 23
|
||||
rect 28 -51 32 -18
|
||||
rect 2 39 6 76
|
||||
rect 2 0 6 35
|
||||
rect 9 23 13 76
|
||||
rect 25 62 29 72
|
||||
rect 9 0 13 19
|
||||
rect 16 6 20 26
|
||||
rect 34 6 38 26
|
||||
rect 41 23 45 76
|
||||
rect 41 0 45 19
|
||||
rect 48 39 52 76
|
||||
rect 48 0 52 35
|
||||
<< bb >>
|
||||
rect 0 0 54 74
|
||||
<< labels >>
|
||||
rlabel metal1 7 -49 7 -49 1 wl1
|
||||
rlabel psubstratepcontact 7 -42 7 -42 1 gnd
|
||||
rlabel m2contact 7 21 7 21 5 vdd
|
||||
rlabel metal1 -1 14 -1 14 1 wl0
|
||||
rlabel metal2 -16 -46 -16 -46 2 bl0
|
||||
rlabel metal2 -9 -46 -9 -46 1 bl1
|
||||
rlabel metal2 23 -46 23 -46 1 br1
|
||||
rlabel metal2 30 -46 30 -46 8 br0
|
||||
rlabel metal1 27 4 27 4 1 wl1
|
||||
rlabel psubstratepcontact 27 11 27 11 1 gnd
|
||||
rlabel m2contact 27 74 27 74 5 vdd
|
||||
rlabel metal1 19 67 19 67 1 wl0
|
||||
rlabel metal2 4 7 4 7 2 bl0
|
||||
rlabel metal2 11 7 11 7 1 bl1
|
||||
rlabel metal2 43 7 43 7 1 br1
|
||||
rlabel metal2 50 7 50 7 8 br0
|
||||
<< end >>
|
||||
|
|
|
|||
|
|
@ -0,0 +1,14 @@
|
|||
|
||||
.SUBCKT cell_1rw_1r bl0 br0 bl1 br1 wl0 wl1 vdd gnd
|
||||
MM9 RA_to_R_right wl1 br1 gnd n w=1.6u l=0.4u
|
||||
MM8 RA_to_R_right Q gnd gnd n w=1.6u l=0.4u
|
||||
MM7 RA_to_R_left Q_bar gnd gnd n w=1.6u l=0.4u
|
||||
MM6 RA_to_R_left wl1 bl1 gnd n w=1.6u l=0.4u
|
||||
MM5 Q wl0 bl0 gnd n w=1.2u l=0.4u
|
||||
MM4 Q_bar wl0 br0 gnd n w=1.2u l=0.4u
|
||||
MM1 Q Q_bar gnd gnd n w=2.4u l=0.4u
|
||||
MM0 Q_bar Q gnd gnd n w=2.4u l=0.4u
|
||||
MM3 Q Q_bar vdd vdd p w=0.8u l=0.4u
|
||||
MM2 Q_bar Q vdd vdd p w=0.8u l=0.4u
|
||||
.ENDS
|
||||
|
||||
Loading…
Reference in New Issue