* Change simlib's $mux cell to use the ternary operator as $_MUX_
already does
* Stop opt_expr -keepdc from changing S=x to S=0
* Change const eval of $mux and $pmux to match the updated simlib
(fixes sim)
* The sat behavior of $mux already matches the updated simlib
The verilog frontend uses $mux for the ternary operators and this
changes all interpreations of the $mux cell (that I found) to match the
verilog simulation behavior for the ternary operator. For 'if' and
'case' expressions the frontend may also use $mux but uses $eqx if the
verilog simulation behavior is requested with the '-ifx' option.
For $pmux there is a remaining mismatch between the sat behavior and the
simlib behavior. Resolving this requires more discussion, as the $pmux
cell does not directly correspond to a specific verilog construct.
This adds one simple piece of functionality to opt_expr: when a cell
port is connected to a fully-constant signal (as determined by sigmap),
the port is reconnected directly to the constant value. This is just
enough optimization to fix the "non-constant $meminit input" problem
without requiring a full opt_clean or a separate pass.
Turns out the code for div by a power of 2 is already almost capable of
optimizing this to a shift-by-0 or and-with-0, which will be further
folded into nothingness; let's beef it up to handle div by 1 as well.
Fixes#2820.
The $div and $mod cells use truncating division semantics (rounding
towards 0), as defined by e.g. Verilog. Another rounding mode, flooring
(rounding towards negative infinity), can be used in e.g. VHDL. The
new $divfloor cell provides this flooring division.
This commit also fixes the handling of $div in opt_expr, which was
previously optimized as if it was $divfloor.
The $div and $mod cells use truncating division semantics (rounding
towards 0), as defined by e.g. Verilog. Another rounding mode, flooring
(rounding towards negative infinity), can be used in e.g. VHDL. The
new $modfloor cell provides this flooring modulo (also known as "remainder"
in several languages, but this name is ambiguous).
This commit also fixes the handling of $mod in opt_expr, which was
previously optimized as if it was $modfloor.
Detect the places in the $alu where the carry bit is constant (due to
const A[i] == B[i] ^ BI) and split it into smaller $alu at these points.
Also, make the existing const-carry detection for low bits more generic
(now handles cases where both BI and CI are constant, but not equal to
one another).
Fixes#1912.
This was obtained by running the following SED command in passes/opt/
and then using "meld foo.cc foo.cc.orig" to manually fix all resulting
compiler errors.
sed -i.orig -r 's/"\\\\([a-zA-Z0-9_]+)"/ID(\1)/g; s/"(\$[a-zA-Z0-9_]+)"/ID(\1)/g;' *.cc
Signed-off-by: Clifford Wolf <clifford@clifford.at>
The idea behind this simplification is that a N-bit signal X being
compared with an M-bit constant where M>N and the constant has Nth
or higher bit set, it either always succeeds or always fails.
However, the existing implementation only worked with one-hot signals
for some reason. It also printed incorrect messages.
This commit adjusts the simplification to have as much power as
possible, and fixes other bugs.
The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.
DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint
More hits were found by looking through comments and strings manually.
Before this commit, only unsigned comparisons with all-0 would be
simplified. This commit also makes the code handling such comparisons
to be more rigorous and not abort on unexpected input.
o Not all derived methods were marked 'override', but it is a great
feature of C++11 that we should make use of.
o While at it: touched header files got a -*- c++ -*- for emacs to
provide support for that language.
o use YS_OVERRIDE for all override keywords (though we should probably
use the plain keyword going forward now that C++11 is established)
Remove opt_compare and put comparison pass in opt_expr
assuming a [7:0] is unsigned
a >= (1<<x) becomes |a[7:x]
a < (1<<x) becomes !a[7:x]
Additionally:
a >= 0 becomes constant true,
a < 0 becomes constant false
delete opt_compare.cc
revert opt.cc to commit b7cfb7dbd (remove opt_compare step)