All `proc_*` passes now use the same module and process for loops, using `design->all_selected_modules()` and `mod->selected_processes()` respectively.
This simplifies the code, and makes the couple `proc_*` passes that were ignoring boxed modules stop doing that (which seems to have been erroneous rather than intentional).
Calling `throw dst_end_of_data_exception()` when the desired number of cycles has been reached means that the fst reader can't tidy up after itself and leads to memory leaks.
This doesn't happen when the `-stop` flag is used because the `Yosys::FstData` struct tracks the end time and skips the outer callback if the simulation has gone past the desired end time.
Move cycle checking into the inner callback along with the time checking means that the outer callback no longer needs to throw an exception in order to stop checking further values, while still allowing the fst reader to finish reading and deallocate memory.
libfst is no longer included in gtkwave and instead has its own repo. There has also been some refactoring, so the patches need to update to match, as does sim.cc.
When building `WITH_PYTHON`, where a global list of modules is maintained, deleting a module also erases the entry in said global list. This can lead to memory corruption if the global list is destructed before the module.
Using `on_shutdown()` instead means the module destructor is explicitly called before the global list can be destructed, preventing the issue.
Also add a comment to `Pass::~Pass()` to suggest the same for future passes that might try to use that (and see this commit in the blame if they need a reason why).
The previous commit introduced code that optimizes the activation
patterns to be able to generate smaller activation logic. The resulting
supercell was then enqueued as shareable using those optimized
activation patterns. The condition represented by the optimized patterns
is an over-approximation of the actual activiation condition. This means
using it as activiation for the supercell loses precision and pessimises
sharing of the supercell with further cells, breaking the sat/share
test.
This commit fixes that by using the optimized activiation patterns only
for the generation of activation logic and using the original patterns
for enqueuing the supercell.
In case the two sets of activation patterns are mutually exclusive
without considering the logic feeding into the activation signals, an
activation condition can only be relevant if present in both sets with
opposite polarity.
This detects pattern-only mutual exclusion by running an additional SAT
query before importing the input cone logic. If that is already UNSAT,
we remove all non-relevant condition and re-simplify the remaining
patterns.
In cases of pattern-only mutual exclusion, this will often produce much
smaller selection logic and avoid the more costly SAT query that
includes the input cones.
Partially reverts commit 9c5bffcf93.
The reasoning behind this is that setup.py is intended to strictly consume the Makefile and not be consumed by it. The attempt at using them recursively has caused a number of issues and has rendered Pyosys unusable to some users: See https://github.com/YosysHQ/yosys/issues/5012
Additionally, unlike the previous pyosys installation target, the wheel installation does not respect PREFIX=, only venvs.
For installation inside a venv, the intended method should remain a user manually executing `pip3 install .` instead of relying on the Makefile.
Use `Design::selected_modules()` directly, popping at the end instead of copying the selection.
Also default to a complete selection so that boxes work as before.
Simplify to using `RTLIL::SELECT_WHOLE_CMDERR` instead of doing it manually.
Also add tests for importing selections with boxes.
If all the (non-select) inputs of a `$_MUX{4,8,16}_` are undefined, replace it, just like we do for `$mux` and `$_MUX_`.
Add `tests/opt/opt_expr_mux_undef.ys` to verify this.
This doesn't do any const folding on the wide muxes, or shrinking to less wide muxes. It only handles the case where all inputs are 'x and the mux can be completely removed.
This adds optional in-memory caching of parsed liberty files to speed up
flows that repeatedly parse the same liberty files. To avoid increasing
the memory overhead by default, the caching is disabled by default. The
caching can be controlled globally or on a per path basis using the new
`libcache` command, which also allows purging cached data.
These were introduced by 0a6d9f4.
1) While in a paren "(", don't error on newline.
2) Don't parse an extra token when parsing vector ranges. Let the caller parse the next token as necessary.
This extends the `LibertyInputStream` added in the previous commit to
allow arbitrary lookahead. Then this uses the lookahead to find the
total length of the token within the input buffer, instead of consuming
the token byte by byte while appending to a std::string. Constructing
the std::string with the total length is known avoids any reallocations
from growing std::string's buffer.
The lexer for liberty files was using istream's `get` and `unget` which
are notorious for bad performance and that showed up during profiling.
This replaces the direct `istream` use with a custom LibertyInputStream
that does its own buffering to provide `get` and `unget` that behave the
same way but are implemented with a fast path that is easy to inline and
optimize.
If the selection stack only has one element (which it normally does), then
`design->pop_selection()` automatically resets to the default full selection.
This is a problem for `select [-none | -clear]` which were trying to replace the
current selection, but because the pop added an extra element when the `execute`
returned, the extra selection (the one we actually wanted) gets popped too. So
instead, reassign `design->selection()` in the same way as if we called `select
[selection]`.
Also adds selection stack tests, and removes the accidentally-committed
`boxes_dummy.ys`.
Instead, change the default `Design::selected_modules()` to match the behaviour (i.e. `selected_unboxed_modules_warn()`) because it's a lot of files to touch and they don't really _need_ to be updated.
Also change `Design::selected_whole_modules()` users over to `Design::selected_unboxed_whole_modules()`, except `attrmap` because I'm not convinced it should be ignoring boxes. So instead, leave the deprecation warning for that one use and come back to the pass another time.
Fixes quicklogic/pp3 problem with `dffepc` including processes.
Also means the preceding `proc` is safe to remove (and may result in some small speedup by doing so).
Used to select all modules including boxes, set when both `full` and `boxes` are true in the constructor, pulling down `full_selection`.
Add `Selection::selects_all()` method as short hand for `full_selection || complete_selection`.
Update selection operations to account for complete selections.
Add static methods to `Selection` for creating a new empty/full/complete selection to make it clearer to users when doing so.
Use said static methods to replace most instances of the `Selection` constructor.
Update `Selection::optimize` to use
The `Design::selected_*()` methods no longer unconditionally skip boxed modules. Instead, selections are now box and design aware.
The selection constructor now optionally takes a design pointer, and has a new `selects_boxes` flag. If the selection has an assigned design, then `Selection::selected_*()` will only return true for boxed modules if the selects_boxes flag is set. A warning is raised if a selection is checked and no design is set. Selections can change design via the `Selection::optimize()` method.
Most places that iterate over `Design::modules()` and check `Selection::selected_module()` should instead use `Design::selected_modules()`.
Since boxed modules should only ever be selected explicitly, and `full_selection` (now) refers to all non-boxed modules, `Selection::optimize()` will clear the `full_selection` flag if the `selects_boxes` flag is enabled, and instead explicitly selects all modules (including boxed modules). This also means that `full_selection` will only get automatically applied to a design without any boxed modules.
These changes necessitated a number of changes to `select.cc` in order to support this functionality when operating on selections, in particular when combining selections (e.g. by union or difference).
To minimize redundancy, a number of places that previously iterated over `design->modules()` now push the current selection to the design, use `design->selected_modules()`, and then pop the selection when done.
Introduce `RTLIL::NamedObject`, to allow for iterating over all members of a module with a single iterator instead of needing to iterate over wires, cells, memories, and processes separately.
Also implement `Module::selected_{memories, processes, members}()` to match wires and cells methods. The `selected_members()` method combines each of the other `selected_*()` methods into a single list.
- Techlib pmgens are now in relevant techlibs/*.
- `peepopt` pmgens are now in passes/opt.
- `test_pmgen` is still in passes/pmgen.
- Update `Makefile.inc` and `.gitignore` file(s) to match new `*_pm.h` location,
as well as the `#include`s.
- Change default `%_pm.h` make target to `techlibs/%_pm.h` and move it to the
top level Makefile.
- Update pmgen target to use `$(notdir $*)` (where `$*` is the part of the file
name that matched the '%' in the target) instead of `$(subst _pm.h,,$(notdir
$@))`.
The B port is for single-bit summands. These can just as well be
represented as an additional summand on the A port (which supports
summands of arbitrary width). An upcoming `$macc_v2` cell won't be
special-casing single-bit summands in any way.
In preparation, make the following changes:
* remove the `bit_ports` field from the `Macc` helper (instead add any
single-bit summands to `ports` next to other summands)
* leave `B` empty on cells emitted from `Macc::to_cell`
Previously the `abc9_box` mode was reserved to modules with the
`blackbox` or `whitebox` attribute. Allow `abc9_box` on ordinary modules
when doing hierarchical synthesis.
`abc9_ops -prep_box` command interprets the `abc9_box` attribute and
prepares a .box file for ABC consumption. Previously this command was
removing the attribute as it was processing each module which prevented
repeated invocation of this command unless the box definitions were
refreshed from a source file.
Also the command was keeping existing `abc9_box_id` attributes instead
of overwriting them with values from a new number sequence.
Change both behaviors to allow repeated invocations of the command on
the same design.