Apart from the representational changes below, this patch renames
AstNodeMath to AstNodeExpr, and AstCMath to AstCExpr.
Now every expression (i.e.: those AstNodes that represent a [possibly
void] value, with value being interpreted in a very general sense) has
AstNodeExpr as a super class. This necessitates the introduction of an
AstStmtExpr, which represents an expression in statement position, e.g :
'foo();' would be represented as AstStmtExpr(AstCCall(foo)). In exchange
we can get rid of isStatement() in AstNodeStmt, which now really always
represent a statement
Peak memory consumption and verilation speed are not measurably changed.
Partial step towards #3420
Also added a testing only -fno-const-before-dfg option, as otherwise
V3Const eats up a lot of the simple inputs. A lot of the things V3Const
swallows in the simple cases can make it to DFG in complex cases, or DFG
itself can create them during optimization. In any case to save
complexity of testing DFG constant folding, we use this option to turn
off V3Const prior to the DFG passes in the relevant test.
Added a new data-flow graph (DFG) based combinational logic optimizer.
The capabilities of this covers a combination of V3Const and V3Gate, but
is also more capable of transforming combinational logic into simplified
forms and more.
This entail adding a new internal representation, `DfgGraph`, and
appropriate `astToDfg` and `dfgToAst` conversion functions. The graph
represents some of the combinational equations (~continuous assignments)
in a module, and for the duration of the DFG passes, it takes over the
role of AstModule. A bulk of the Dfg vertices represent expressions.
These vertex classes, and the corresponding conversions to/from AST are
mostly auto-generated by astgen, together with a DfgVVisitor that can be
used for dynamic dispatch based on vertex (operation) types.
The resulting combinational logic graph (a `DfgGraph`) is then optimized
in various ways. Currently we perform common sub-expression elimination,
variable inlining, and some specific peephole optimizations, but there
is scope for more optimizations in the future using the same
representation. The optimizer is run directly before and after inlining.
The pre inline pass can operate on smaller graphs and hence converges
faster, but still has a chance of substantially reducing the size of the
logic on some designs, making inlining both faster and less memory
intensive. The post inline pass can then optimize across the inlined
module boundaries. No optimization is performed across a module
boundary.
For debugging purposes, each peephole optimization can be disabled
individually via the -fno-dfg-peepnole-<OPT> option, where <OPT> is one
of the optimizations listed in V3DfgPeephole.h, for example
-fno-dfg-peephole-remove-not-not.
The peephole patterns currently implemented were mostly picked based on
the design that inspired this work, and on that design the optimizations
yields ~30% single threaded speedup, and ~50% speedup on 4 threads. As
you can imagine not having to haul around redundant combinational
networks in the rest of the compilation pipeline also helps with memory
consumption, and up to 30% peak memory usage of Verilator was observed
on the same design.
Gains on other arbitrary designs are smaller (and can be improved by
analyzing those designs). For example OpenTitan gains between 1-15%
speedup depending on build type.
- Rename `--dump-treei` option to `--dumpi-tree`, which itself is now a
special case of `--dumpi-<tag>` where tag can be a magic word, or a
filename
- Control dumping via static `dump*()` functions, analogous to `debug()`
- Make dumping independent of the value of `debug()` (so dumping always
works even without the debug flag)
- Add separate `--dumpi-graph` for dumping V3Graphs, which is again a
special case of `--dumpi-<tag>`
- Alias `--dump-<tag>` to `--dumpi-<tag> 3` as before
Adds timing support to Verilator. It makes it possible to use delays,
event controls within processes (not just at the start), wait
statements, and forks.
Building a design with those constructs requires a compiler that
supports C++20 coroutines (GCC 10, Clang 5).
The basic idea is to have processes and tasks with delays/event controls
implemented as C++20 coroutines. This allows us to suspend and resume
them at any time.
There are five main runtime classes responsible for managing suspended
coroutines:
* `VlCoroutineHandle`, a wrapper over C++20's `std::coroutine_handle`
with move semantics and automatic cleanup.
* `VlDelayScheduler`, for coroutines suspended by delays. It resumes
them at a proper simulation time.
* `VlTriggerScheduler`, for coroutines suspended by event controls. It
resumes them if its corresponding trigger was set.
* `VlForkSync`, used for syncing `fork..join` and `fork..join_any`
blocks.
* `VlCoroutine`, the return type of all verilated coroutines. It allows
for suspending a stack of coroutines (normally, C++ coroutines are
stackless).
There is a new visitor in `V3Timing.cpp` which:
* scales delays according to the timescale,
* simplifies intra-assignment timing controls and net delays into
regular timing controls and assignments,
* simplifies wait statements into loops with event controls,
* marks processes and tasks with timing controls in them as
suspendable,
* creates delay, trigger scheduler, and fork sync variables,
* transforms timing controls and fork joins into C++ awaits
There are new functions in `V3SchedTiming.cpp` (used by `V3Sched.cpp`)
that integrate static scheduling with timing. This involves providing
external domains for variables, so that the necessary combinational
logic gets triggered after coroutine resumption, as well as statements
that need to be injected into the design eval function to perform this
resumption at the correct time.
There is also a function that transforms forked processes into separate
functions.
See the comments in `verilated_timing.h`, `verilated_timing.cpp`,
`V3Timing.cpp`, and `V3SchedTiming.cpp`, as well as the internals
documentation for more details.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
This is a major re-design of the way code is scheduled in Verilator,
with the goal of properly supporting the Active and NBA regions of the
SystemVerilog scheduling model, as defined in IEEE 1800-2017 chapter 4.
With this change, all internally generated clocks should simulate
correctly, and there should be no more need for the `clock_enable` and
`clocker` attributes for correctness in the absence of Verilator
generated library models (`--lib-create`).
Details of the new scheduling model and algorithm are provided in
docs/internals.rst.
Implements #3278
- Add more tests, including for tracing.
- Apply some cleaner, more generic abstractions in the implementation.
- Use clearer AstRelease which is not an assignment.
Apart from adding required AstCUse, V3CUse also used to create some
standard methods for classes. This is now done in a separate pass
V3Common. Note that this is not a performance issue, as V3Common just
iterates through each module, which are stored in a simple linked list
under the netlist, and does not need to traverse the whole netlist.
Internal AstNodeModule headers (.h) and implementation (.cpp) files are
now emitted separately in V3EmitC::emitcHeaders() and
V3EmitC::emitcImp() respectively. No functional change intended
A separate V3VariableOrder pass is now used to order module variables
before Emit. All variables are now ordered together, without
consideration for whether they are ports, signals form the design, or
additional internal variables added by Verilator (which used to be
ordered and emitted as separate groups in Emit). For single threaded
models, this is performance neutral. For multi-threaded models, the
MTask affinity based sorting was slightly modified, so variables with no
MTask affinity are emitted last, otherwise the MTask affinity sets are
sorted using the TSP sorter as before, but again, ports, signals, and
internal variables are not differentiated. This yields a 2%+ speedup for
the multithreaded model on OpenTitan.
Remove magic code fragments form EmitCTrace, so Emit need not be aware
that a function is tracing related or not (apart from the purpose of
file name generation). All necessary code is now generated via text
nodes in V3TraceDecl and V3Trace. No functional change intended.
This patch implements #3032. Verilator creates a module representing the
SystemVerilog $root scope (V3LinkLevel::wrapTop). Until now, this was
called the "TOP" module, which also acted as the user instantiated model
class. Syms used to hold a pointer to this root module, but hold
instances of any submodule. This patch renames this root scope module
from "TOP" to "$root", and introduces a separate model class which is
now an interface class. As the root module is no longer the user
interface class, it can now be made an instance of Syms, just like any
other submodule. This allows absolute references into the root module to
avoid an additional pointer indirection resulting in a potential speedup
(about 1.5% on OpenTitan). The model class now also contains all non
design specific generated code (e.g.: eval loops, trace config, etc),
which additionally simplifies Verilator internals.
Please see the updated documentation for the model interface changes.
V3Localize can now localize variable references that reference variables
located in scopes different from the referencing function. This also
means V3Descope has now moved after V3Localize.
The goal of this patch is to move functionality related to constructing
the thread entry points and then invoking them out of V3EmitC (and into
V3Partition). The long term goal being enabling V3EmitC to emit
functions partitioned based on header dependencies. V3EmitC having to
deal with only AstCFunc instances and no other magic will facilitate
this.
In this patch:
- We construct AstCFuncs for each thread entry point in
V3Partition::finalize and move AstMTaskBody nodes under these functions.
- Add the invocation of the threads as text statements within the
AstExecGraph, so they are still invoked where the exec graph is located.
(the entry point functions are still referenced via AstCCall or
AstAddOrCFunc, so lazy declarations of referenced functions are created
automatically).
- Explicitly handle MTask state variables (VlMTaskVertex in
verilated_threads.h) within Verilator, so no need to text bash a lot of
these any more (some text refs still remain but they are all created
next to each other within V3Partition.cpp).
The effect of all this on the emitted code should be nothing but some
identifier/ordering changes. No functional change intended.
What previously used to be per module static constants created in
V3Table and V3Prelim are now merged globally within the whole model and
emitted as part of a separate constant pool. Members of the constant
pool are global variables which are declared lazily when used (similar to
loose methods).
This provides minor simulation performance benefit, but can provide
large C++ compilation time improvement, notably with Clang (4x).
This patch implements #2366 .
This adds the flag --generate-waivefile <filename>. This will generate
a verilator config file with the proper lint_off statemens to turn off
warnings emitted during this particular run.
This feature can be used to start with using Verilator as linter and
systematically capture all known lint warning for further
elimination. It hopefully helps people turning of -Wno-fatal or
-Wno-lint and gradually improve their code base.
Signed-off-by: Stefan Wallentowitz <stefan.wallentowitz@hm.edu>
- Issue an error when --build is used together with --make
- When given --build, always use GNU Make to perform the build
- Update documentation (examples were good as they were)
- Remove the broken t_flag_build_cmake test
Fixes#2280
Includes `timescale, $printtimescale, $timeformat.
VL_TIME_MULTIPLIER, VL_TIME_PRECISION, VL_TIME_UNIT have been removed
and the time precision must now match the SystemC time precision.
To get closer behavior to older versions, use e.g. --timescale-override
"1ps/1ps".
Wilson Snyder
Todd Strader
Anthony Donlon
Mariusz Glebocki
Krzysztof Boroński
Krzysztof Boronski
Kamil Rakoczy
Geza Lore
Jiacheng Qian
Krzysztof Bieganski
Dan Petrisko
Yutetsu TAKATSUKASA
James Hanlon
Maciej Sobkowski
Stefan Wallentowitz
James Hanlon