**Problem**
The client sent the handshake and ignored the answer: responsePlan had
no case for it, so an invalid token was dropped. The channel then stayed
unauthenticated and every later request was refused, with nothing saying
why.
**Solution**
Match the handshake response. On a refusal, read the token file again
and present what it names now, up to handshakeAttemptLimit times, then
report the refusal.
---------
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
The flag and the axes both say whether a row is built for Scala, and
where they disagree the flag wins: a row given versions and
autoScalaLibrary = false is built for none of them, and the versions
are dropped. Nothing said so.
ProjectMatrix: validate axes against autoScalaLibrary
---------
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
Problem: taskValue outside a task or setting macro reports an error naming value.
Solution: use a dedicated taskValue marker, preserve macro processing, and add diagnostic and behavioral regression tests.
**Problem**
With HTTP/2, Apache HttpClient can begin the authenticated replay while the rejected stream is still consuming the same repeatable file producer.
The overlapping consumption can send corrupted artifacts, according to mkurz.
**Solution**
This hopefully fixes the issue by updateing to Gigahorse 0.9.6, which fixes the preauth support.
* [2.x] test: Pin what a platform axis alone does
**Problem**
`jsPlatform` enables the Scala.js plugin; the axis does not. A row
built by `customRow` with `VirtualAxis.js` is a Scala.js row by every
name it carries and a JVM row by what runs.
**Solution**
Assert what such a row reports as its platform.
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
* [2.x] feat: Enable JS/Native plugins if the axis is used
Only jsPlatform and nativePlatform enabled the plugin their platform
needs, so using customRow directly would skip it.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
* [2.x] feat: Configure the rows a matrix builds
A build could reach every row with configure, or one row with the call
that made it, and nothing in between, so settings for the rows of one
platform travelled with every call that creates them. Now
configureRows takes a function of a row's axes and answers with what
to apply, and a row is given it as it is built, so a row declared
after the call is covered too.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
---------
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
* test: Pin the axes of a row that carries no Scala version
`jvmPlatform(autoScalaLibrary = false)` passes `VirtualAxis.jvm` to
`customRow`, which appends it again, so the row holds the platform axis
twice and its generated directories are named `scalajvm-jvm` and
`javajvm-jvm`. Nothing covered that path.
* fix: Keep one platform axis on a row that names its own
`jvmPlatform(autoScalaLibrary = false)` hands `customRow` the platform
axis, and `customRow` appended a second one, so the row's generated
directories were named `scalajvm-jvm` and `javajvm-jvm` and a cell
whose sources sat in the usual places compiled nothing. Now the axis is
appended only when the caller named no platform.
**Problem**
The clean task no longer works as intended on sbt 2.x due to the disk cache.
**Solution**
This implements an in-memory state of invalidation for subproject and
configuration axes. So clean task would mark subprojects to be
invalidated regardless of the disk cache state.
The invalidation state would be lifted once any cached task executes,
so it's not technically same as sbt 1.x, but the UX should be similar.
Two invocations that both find different -D options could interleave, the second
one connecting to the server the first had just started and shutting that down
mid-build. The restart now holds the connection file and reads it again once it
has it, so a replacement that already carries the right options is left alone.
**Problem**
Tags are enforced per task node.
This means that a chain like setup-test-cleanup
would release the tags midway, and allow interleaving
executions even for exclusive tests.
**Solution**
This implements a special Span tag, which lets us
keep the tags across the task chains.
Since this requires the flatMapped tasks to not carry their
own tags to prevent a deadlock, the feature needs to be opt-in /
internal implementation.
**Problem**
sbt fails to start on openSUSE, since OSTYPE=linux, not linux-gnu.
The startup script tries to add .ZIP extension, and fails to untar native client.
**Solution**
Modified startup script only check that OSTYPE starts with linux, instead of linux-gnu.
compileOrder and usePipelining were missing from CompileInputs2, so two builds differing only in those settings shared one cache entry and replayed each other's results. Adds both to the key, with a unit test on the hash and a scripted test that fails without the change.
LogExchange.unbindLoggerAppenders calls clearAppenders, which drops and closes every appender on the logger. So if you bind an appender to the global logger and then unbind it, sbt's own console and backing appenders go with it and nothing prints for the rest of the session.
LoggerContext now has removeAppender(loggerName, appender), which removes that one instance by identity and closes it. LogExchange gets an unbindLoggerAppenders(name, appenders) overload on top of it, so unbinding mirrors binding. The existing single-arg version behaves as before, it just says in the scaladoc what it does now.
Task-local filters used in sources.all(filter).value currently produce generic Scala macro scope errors. Report one actionable diagnostic at the offending reference, explaining how to move the definition outside the task or use Def.taskDyn.
**Problem**
When a key does not say which project it belongs to, Extracted.runAggregated filled in the global scope instead of the current project.
**Solution**
Fill in the current project instead, the way runInputTask always has. The only difference between the two scopes is the project, so a key that already names a project behaves exactly as before.
**Problem**
If a client cannot reach the server, it deletes the portfile. Then it
starts a second server. The first server is displaced: its socket path
now belongs to the second server.
A displaced server keeps running. A dropIfIdle notification cannot
reach it, because the proc file it registered names the socket that
the second server now owns.
**Solution**
The portfile holds the serverId of whichever server wrote it. Watch
that file, and exit when the id is not this server's. Leave the
portfile to the server that owns it.
---------
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
+cleanFull failed with Not a valid key: Full. The cross command re-parses its argument with the key parser, and clean is an accepting prefix, so the rest was taken as task args. Args now have to be preceded by whitespace.
**Problem**
Currently bad resources are silently dropped.
**Solution**
1. Fix a bad resource generator in the build.
2. Fail the build when bad resources are found.
The overload that takes axisValues and settings passes an empty
scalaVersions into the fold that builds the rows, so a call with
autoScalaLibrary = true returns the matrix unchanged. The assertion
records that, so the fix can move it.
Now the call adds one row from the axes it was given, so a build can name a partial or a full version instead.
* [2.x] feat: testForkedWorker setting
**Problem**
A major bottleneck of the default setting is that concurrentRestriction
allows exactly one forked test in flight at a time,
and partly due to the restriction all test suites from a subproject runs
within the forked process.
**Solution**
This adds a new setting called testForkedWorker, which lets the build users
tune the number of concurrent worker process in flight.
I've set the default to CPU count / 3.
Within a single worker, the default parallelism is reduced to 2.
The default test grouping now splits the test suites into
testForkedWorker count.
* Use Global scope for overall worker count
Subproject scoping can be used for single vs split
* Adds math.max(..., 1)
* Avoid running setup/cleanup on an empty selection
* Fix the tag application order
* Rename key to workerMaxInstances
* Implement TestTopology
* fix: Fixes exclusive test
Note due to the limitation of the tag system, setup-clean/cleanup
may overlap.
* Check that workerMaxInstances >= 1
**Problem**
The accept loop did not catch an exception from onIncomingSocket, so
its thread ended. Nothing closed the server socket, so the path stayed
bound: the server took no further client, and the process kept running.
The socket of the client that failed stayed open too.
**Solution**
Log that client, close its socket, and take the next one. An exception
from accept itself keeps the handling it had, so a socket that is
really broken still ends the loop.
The callback now takes a holder rather than the socket, and calls
AtomicCloseable.release to keep it. The loop closes whatever the
callback left behind.
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
**Problem**
Nothing covers what the accept loop does when it cannot serve a client.
The next commit changes it.
**Solution**
Assert what the server does now. An exception from onIncomingSocket
ends the accept loop, and the server serves no client after that.
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
* fix: restart the sbt server when -D options change
* fix: don't restart on completions, wait for the socket
* fix: only trust -D options recorded for this build
* fix: confirm the server left before reporting it gone
* Update protocol/src/main/contraband/portfile.contra
Co-authored-by: eugene yokota <[email protected]>
* fix: record the server -D options as a list
* fix: record the -D options without their values
The connection file keeps the name of each option and a salted digest of it
rather than the option itself, and the comparison follows the JVM in taking the
last definition of a name. A client that is not allowed to restart the server
says which options it cannot pick up instead of staying quiet about them.
* fix: compare the -D options given before a command
A trailing -D option used to switch the whole comparison off, which dropped the
options written before it, and a shutdown request that never reached the server
waited the full timeout before saying so.
* fix: leave a server no client started alone
The connection file says whether its recorded options are the whole story, so a
server an editor keeps is warned about instead of shut down, while one the client
started with no options is still replaced. A restart that cannot reach the server
warns and carries on rather than failing the invocation.
* build: filter NetworkClient clinit in MiMa
---------
Co-authored-by: eugene yokota <[email protected]>
CommandExchange asked twice whether an exec came from the closing
channel, and cancelled an exec in two places. Each has a name now, as
does the read of shuttingDown and the Try whose failure is ignored.
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
Albert MeltzerandClaude Opus 5
eugene yokota
kenji yoshida
Anatolii Kmetiuk
Stas Shevchenko
Stas Shevchenko
Alexander
Jozef Koval