1.8 KiB

Raw Blame History

cycloader

Utility for programming Intel/Altera Cyclone and Xilinx Serie 7

Current support:

Trenz cyc1000 Cyclone 10 LP 10CL025 (memory and spi flash)
Digilent arty 35T (memory)

compile and install

This application uses libftdi1, so this library must be installed (and, depending of the distribution, headers too)

apt-get install libftdi1-2 libftdi1-dev libftdipp1-3 libftdipp1-dev

and if not already done, install pkg-config, make and g++.

To build the app:

$ make

To install

$ sudo make install

Currently, the install path is hardcoded to /usr/local

Usage

cycloader --help
Usage: cycloader [OPTION...] BIT_FILE
cycloader -- a program to flash cyclone10 LP FPGA

  -b, --board=BOARD          board name, may be used instead of cable
  -c, --cable=CABLE          jtag interface
  -d, --display              display FPGA and EEPROM model
  -o, --offset=OFFSET        start offset in EEPROM
  -r, --reset                reset FPGA after operations
  -v, --verbose              Produce verbose output
  -?, --help                 Give this help list
      --usage                Give a short usage message
  -V, --version              Print program version

To have complete help

CYC1000

loading in memory:

sof to svf generation:

quartus_cpf -c -q -g 3.3 -n 12.0MHz p project_name.sof project_name.svf

file load:

cycloader -b cyc1000 project_name.svf

SPI flash:

sof to rpd:

quartus_cpf -o auto_create_rpd=on -c -d EPCQ16A -s 10CL025YU256C8G project_name.svf project_name.jic