19 lines
1.5 KiB
Markdown
19 lines
1.5 KiB
Markdown
# Cable compatibility list
|
|
|
|
* anlogic JTAG adapter
|
|
* [digilent_hs2](https://store.digilentinc.com/jtag-hs2-programming-cable/): jtag programmer cable from digilent
|
|
* [cmsisdap](https://os.mbed.com/docs/mbed-os/v6.11/debug-test/daplink.html): ARM CMSIS DAP protocol interface (hid only)
|
|
* [Orbtrace](https://github.com/orbcode/orbtrace): Open source FPGA-based debug and trace interface
|
|
* [DFU (Device Firmware Upgrade)](http://www.usb.org/developers/docs/devclass_docs/DFU_1.1.pdf): USB device compatible with DFU protocol
|
|
* [DirtyJTAG](https://github.com/jeanthom/DirtyJTAG): JTAG probe firmware for STM32F1
|
|
(Best to use release (1.4 or newer) or limit the --freq to 600000 with older releases. New version https://github.com/jeanthom/DirtyJTAG/tree/dirtyjtag2 is also supported)
|
|
* Intel USB Blaster I & II : jtag programmer cable from intel/altera
|
|
* JTAG-HS3: jtag programmer cable from digilent
|
|
* FT2232: generic programmer cable based on Ftdi FT2232
|
|
* FT232RL and FT231X: generic USB<->UART converters in bitbang mode
|
|
* [Tang Nano USB-JTAG interface](https://github.com/diodep/ch55x_jtag): FT2232C clone based on CH552 microcontroler
|
|
(with some limitations and workaround)
|
|
* [Tang Nano 4k USB-JTAG interface](https://github.com/sipeed/RV-Debugger-BL702): USB-JTAG/UART debugger based on BL702 microcontroler.
|
|
* [Tigard](https://www.crowdsupply.com/securinghw/tigard): SWD/JTAG/UART/SPI programmer based on Ftdi FT2232HQ
|
|
* [honeycomb USB-JTAG interface](https://github.com/Disasm/f042-ftdi): FT2232C clone based on STM32F042 microcontroler
|