f69ce8a465
Only show libgpiod cable in list if enabled
2022-07-22 10:01:23 +02:00
4ed3ff835c
Clarify code by using different API function
...
Use gpiod_chip_open instead of gpiod_chip_open_by_name, and thus avoid
having to remove "/dev/" prefix.
2022-07-22 09:52:12 +02:00
e847c3a7b0
Add connecting MCU to JTAG support for GW1NSR-4C
2022-07-20 23:32:21 +02:00
0581803def
Add MCU Firmware flashing support for GW1NSR-4C
2022-07-20 23:32:16 +02:00
8d920d7ed0
Bugfix to allow NULL tx pointer
...
Also set the _clkHZ variable which is needed for timing operations
such as erase.
2022-07-18 18:09:34 +02:00
12955b8711
Initial commit of libgpiod JTAG driver
...
Not tested yet.
2022-07-18 18:09:34 +02:00
3e35944a4f
xvc_server: fix message size
2022-07-06 21:36:57 +02:00
975c40a00a
enable xvc only for Linux OS
2022-07-06 21:14:25 +02:00
a90a7b6fa5
main: enable xvc_server
2022-07-06 21:00:24 +02:00
34ff4f4020
xvc_server: first draft
2022-07-06 20:58:19 +02:00
e91ae5e65b
xvc_client: fix frequency convertion
2022-07-06 20:57:47 +02:00
de42f8b239
ftdiJtagMPSSE: add writeTMSTDI method with full tms & tdi buffer. Always return TDO buffer
2022-07-03 21:44:03 +02:00
f364ea2c8f
Merge pull request #239 from BBBSnowball/better-message-if-cmsisdap-disabled
...
cmsisDAP: better error message if support is not enabled
2022-07-02 22:30:18 +02:00
8c9a86699b
cmsisDAP: better error message if support is not enabled
2022-07-02 17:24:02 +02:00
80cf8edc31
cmsisDAP: fix crash in case hid device cannot be opened
2022-07-02 17:03:31 +02:00
2f30668dbc
ORBTrace Mini support (DFU mode)
2022-06-18 22:55:58 +02:00
702ca39300
stop using get_state and promote the use of get_status
2022-06-18 22:50:55 +02:00
de2cdcb67a
ftdispi: add missing index param
2022-06-18 20:21:13 +02:00
780ea66384
DFU: fix potential leak
2022-06-18 18:47:27 +02:00
e21a251af3
DFU: fix detect -> bypass bitstream
2022-06-18 18:39:58 +02:00
e278b87a64
Merge pull request #236 from Icenowy/gw2a
...
Add GW2A support
2022-06-16 07:06:41 +02:00
0779034921
Merge pull request #233 from Icenowy/ep4ce115
...
Add EP4CE115 support
2022-06-16 06:23:35 +02:00
3e00756976
part: add GW2A(R)-18(C)
...
Add JTAG ID code for GW2A(R)-18(C), tested with GW2A-18C on Sipeed Tang
Primer 20K.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 09:54:02 +08:00
fe0b4d347b
gowin: add support for GW2A
...
GW2A has no internal flash, and it uses a yet unknown checksum
algorithm.
Support it by forcing external flash and skip checksum check now.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 09:52:44 +08:00
37dbaba6b8
part: add EP4CE115
...
Altera EP4CE115 is a part from Cyclone IV E line.
Add it to the part database.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 08:52:32 +08:00
82c17f6a7d
dfu: display error code
2022-06-14 23:14:01 +02:00
4d69675041
dfu: check iProduct and iInterface -> set to a default string when empty
2022-06-14 23:09:43 +02:00
c64f1970d6
spiFlash: stop if jedec_id == 0xffffff
2022-06-02 08:52:56 +02:00
1f842e4ebc
cable: add missing mpsse_bit_config index
2022-06-02 08:51:47 +02:00
dec1a0920f
add means to set cable index from command line
2022-06-01 07:17:38 -07:00
610a495898
main: skip-reset fix typo
2022-05-28 18:06:51 +02:00
26ea58c305
main: always check if board is not null before access
2022-05-28 17:20:53 +02:00
051e2ecbfb
add option to bypass reset in SPI write mode. Adapt altera accordingly
2022-05-24 07:29:35 +02:00
e066c7f5b0
Merge pull request #222 from el-coder-sb/add-skip-sram-cmd
...
Add skip sram cmd
2022-05-24 07:16:24 +02:00
847a5040cf
add skip_load_bridge cmd-line parameter
2022-05-23 11:51:16 +02:00
056518e7c7
ihexParser: check buffer size, increase if required
2022-05-22 07:34:09 +02:00
e1eff76162
Merge pull request #228 from MPLew-is/zcu106
...
Correct part number for ZCU106 board
2022-05-16 08:52:28 +02:00
5295544200
Correct part number for ZCU106 board
2022-05-16 00:44:59 -06:00
c9fb3f4065
latticeBitParser: fix end header position with MACHOX3D .bit file
2022-05-14 19:00:21 +02:00
a4d5fd8448
lattice: MACHXO3D no exception when flash-sector is not provided in SRAM mode
2022-05-14 18:54:01 +02:00
ee3b6965f0
fix(part.hpp): use uint32_t instead of int for fpga_list index
...
This resulted in an error with GCC 12:
In file included from src/main.cpp:29:
src/part.hpp:148:1: error: narrowing conversion of ‘2165379139’ from ‘unsigned int’ to ‘int’ [-Wnarrowing]
148 | };
| ^
2022-05-14 15:36:02 +02:00
76f13604d1
Add initial support for ZCU106 development board
2022-05-14 02:48:23 -06:00
f83670996e
spiFlashdb: adding S25FL512S
2022-05-14 10:16:08 +02:00
74eda1cd8a
spiFlashdb: N25Q64 part
2022-05-10 19:07:56 +02:00
6a2a62cae6
support Kintex XC7K420T
2022-05-10 13:07:47 +07:00
2bbf372a1d
Merge pull request #218 from ejdan/efinix-jtag
...
efinix: support loading a bitstream to SRAM using only JTAG pins (no GPIO)
2022-05-02 07:05:37 +02:00
84d5c59dfe
ftdipp_mpsse: don't throw exception when iProduct is empty: display warn and use empty string
2022-05-01 17:09:53 +02:00
db410839af
spiInterface: unprotect_flash: fix return. Improve messages
2022-04-30 20:16:30 +02:00
e094494a59
efinix: support loading a bitstream to memory using only JTAG pins (no GPIO). Tested with Trion T120 BGA324 Development Kit but should work on T20BGA324, T20BGA400, T35, T55, T85, and T120 FPGA.
2022-04-29 15:57:20 +02:00
d7365495aa
spiFlash: fix display: when bp_len==0 -> set bp/tb = 0, otherwise parse reg
2022-04-23 17:58:33 +02:00
5692482152
jlink: write_data -> writeTMSTDI. Fix behaviour
2022-04-17 12:33:37 +02:00
b12d174131
part: add 5CEBA9 entry (issue #213 )
2022-04-11 19:14:58 +02:00
80eeaef6ab
ip CLI arg for XVC
2022-04-11 06:53:22 +02:00
188d7518d1
jlink: check usb_claim error
2022-04-11 06:51:34 +02:00
7bfce0fb2b
xvc_client: Xilinx Virtual Cable client PoC
2022-04-10 16:02:39 +02:00
dce9406599
gatemate: fix failed signal polarity and update documentation
...
* CFG_FAILED signal is no longer inverted
* minor fix in CFG_MD settings in doc/vendors/colognechip.rst
* update evaluation board URL
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2022-04-09 13:08:57 +02:00
08c460135e
xilinx: fix wait until done for spartan3e
2022-04-02 11:53:46 +02:00
285cbde7f4
part: explictly add spartan3e and xc3s250e
2022-04-02 11:52:58 +02:00
7a8ed993f3
spiFlash: bulk_erase: check bp before erase
2022-03-31 06:36:37 +02:00
f615627b3c
Merge pull request #204 from rstephan/p_one_flash
...
Support for the Microchip SST25VF040B flash
2022-03-30 06:45:53 +02:00
648d8b9e3b
Removed `must_relock` part for the "SST25VF040B" as requested
2022-03-29 18:30:23 +02:00
7a5284212b
part: Add support for Kintex Ultrascale XCKU040
...
Signed-off-by: Sylvain Munaut <tnt@asuka.home.246tnt.com>
2022-03-29 10:40:52 +02:00
6578bed6aa
part: Add support for ZynqMP Ultrascale Plus XCZU11EG
...
Signed-off-by: Sylvain Munaut <tnt@asuka.home.246tnt.com>
2022-03-29 10:40:38 +02:00
f9eb32c778
spiFlash: handle case where TB is not configurable
2022-03-29 07:49:08 +02:00
b8fd59e770
ftdipp_mpsse: don't display error when attach kernel driver, when the device hasn't been detach before or when driver isn't loaded.
2022-03-28 18:53:36 +02:00
27f0ff2816
Merge pull request #205 from rstephan/spartan3e
...
Spartan3E (xc3s500evq100) and Papilio One
2022-03-28 18:37:43 +02:00
6da87c3d24
xc3s500e IDCODE: revision set to zero.
2022-03-28 18:14:25 +02:00
8337a926fb
Removed TOP/BOTTOM settings from SST25VF040B
2022-03-28 17:54:43 +02:00
8b6b09ea25
part: Add kintex7 variant xc7k410t
2022-03-28 10:43:11 -05:00
9243a21fe2
xilinx: adapts flow_disable/flow_enable for xc3s, adding custom method to load bitstream for xc3s
2022-03-27 18:11:31 +02:00
386f89ea3a
latticeBitParser: when .bit is encrypted use Part: from header to retrieve idcode
2022-03-27 07:51:18 +02:00
da3dfff609
part: re-adding version nibble to remove ambiguities between U, UM and UM5G
2022-03-27 07:47:38 +02:00
10ee84bb6d
jtag: when verbose > 1: display unfiltered/raw IDCODE
2022-03-27 07:14:14 +02:00
65c1d2ff0e
ftdipp_mpsse: change verbose level
2022-03-27 07:13:40 +02:00
b60f37b56d
Support for the Papilio One board
2022-03-25 21:44:05 +01:00
8c4b1b3afd
Support for the Microchip SST25VF040B flash.
...
Programming is slow, only one byte at a time :-(
2022-03-25 21:15:09 +01:00
7d730eeeb6
ftdiJtagxx: check lowlevel init return value
2022-03-20 16:27:51 +01:00
5d22374408
ftdipp_mpsse: robustness: check all function return code / improve a bit error message
2022-03-20 16:20:57 +01:00
7ed9c201ce
anlogicCable: remove unused _verbose, _tdi, _tms
2022-03-20 10:10:30 +01:00
cdc68b5dfc
efinixHexParser: remove unused reverseOrder
2022-03-20 08:51:18 +01:00
3f5aca5248
colognechip: explicitly set _spi or _ftdi_jtag to null, drop useless else if -> if not _spi it must be jtag
2022-03-20 08:44:55 +01:00
684a4363ba
efinix: fix dumpFlash: add override, remove filename param and use _filename from constructor
2022-03-20 08:27:13 +01:00
648de05e6d
colognechip: fix dumpFlash: add override, remove filename param and use _filename from constructor
2022-03-20 08:25:51 +01:00
74790c40b6
configBitstreamParser: string::find return size_t not uint32_t
2022-03-20 08:24:49 +01:00
80e917fcf1
Use uint32_t for misc_dev_list ( fixes #196 )
2022-03-19 12:13:07 +01:00
3cef7f920d
board: Xilinx ZCU102
2022-03-19 10:08:51 +01:00
8d3310d486
part: ZynqMPSoC XCZU9EG
2022-03-19 10:06:44 +01:00
3210bcd9cb
Merge pull request #194 from infphyny/qmtech_5cefa5f23
...
Add qmtechCycloneV_5cefa5f23 board and spiOverJtag/spiOverJtag_5cefa5…
2022-03-13 15:25:01 +01:00
2ed5eb5eec
Rename 5cefa5f23 to 5ce523, add documentation for board and fpga
2022-03-13 09:14:52 -04:00
9f025e8278
jlink: fix workflow failure
2022-03-12 19:01:54 +01:00
18100ec0f3
cable: new SEGGER J-Link support (PoC)
2022-03-12 18:46:23 +01:00
7b36bdc893
Add qmtechCycloneV_5cefa5f23 board and spiOverJtag/spiOverJtag_5cefa5f23.rbf.gz bitstream to write flash
2022-03-12 09:25:22 -05:00
15fb5ac591
board: PYNQ-Z2
2022-03-12 14:54:24 +01:00
ee08b1ac39
add Cyclone V 5CEFA5 in part database
2022-03-11 14:01:50 -05:00
964c7d6659
ftdi MPSSE / jtag: add option to use neg edge for TDO's sampling
2022-03-11 07:45:48 +01:00
86b2e14dbd
Merge pull request #191 from rwhitby/ice40_warnings
...
ice40: Add override specifier to resolve compiler warnings
2022-03-11 06:50:16 +01:00
259914910f
board: Xilinx ZC706
2022-03-10 18:53:41 +01:00
6ba1968952
part: Zynq XC7Z045
2022-03-10 18:53:12 +01:00
74eb812c6d
cable: digilent jtag-smt2-nc
2022-03-10 18:52:47 +01:00
94c5fbb854
ice40: Add override specifier to resolve compiler warnings
...
The following compiler warnings are resolved by adding appropriate override specifiers:
In file included from openFPGALoader/src/ice40.cpp:6:
openFPGALoader/src/ice40.hpp:26:8: warning: 'dumpFlash' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
bool dumpFlash(uint32_t base_addr, uint32_t len);
^
openFPGALoader/src/device.hpp:46:16: note: overridden virtual function is here
virtual bool dumpFlash(uint32_t base_addr, uint32_t len) {
^
In file included from openFPGALoader/src/ice40.cpp:6:
openFPGALoader/src/ice40.hpp:34:7: warning: 'spi_put' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
int spi_put(uint8_t cmd, uint8_t *tx, uint8_t *rx,
^
openFPGALoader/src/spiInterface.hpp:65:14: note: overridden virtual function is here
virtual int spi_put(uint8_t cmd, uint8_t *tx, uint8_t *rx,
^
In file included from openFPGALoader/src/ice40.cpp:6:
openFPGALoader/src/ice40.hpp:39:7: warning: 'spi_put' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
int spi_put(uint8_t *tx, uint8_t *rx, uint32_t len) {
^
openFPGALoader/src/spiInterface.hpp:75:14: note: overridden virtual function is here
virtual int spi_put(uint8_t *tx, uint8_t *rx, uint32_t len) = 0;
^
In file included from openFPGALoader/src/ice40.cpp:6:
openFPGALoader/src/ice40.hpp:43:7: warning: 'spi_wait' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
int spi_wait(uint8_t cmd, uint8_t mask, uint8_t cond,
^
openFPGALoader/src/spiInterface.hpp:85:14: note: overridden virtual function is here
virtual int spi_wait(uint8_t cmd, uint8_t mask, uint8_t cond,
^
4 warnings generated.
2022-03-10 18:19:49 +10:30
2eac30c24e
ftdiJtagMPSSE: fix read/write polarity: always write on neg, read is by default on pos but may on neg with arty
2022-03-10 07:43:14 +01:00
28ebc98b1b
board: add CERN SPEC150
2022-03-03 15:40:42 +01:00
75e3d82a92
part: xc6slx150T
2022-03-03 15:37:18 +01:00
86fa1e01de
spiFlash: force subsector only for SST26VF032B
2022-02-26 19:10:18 +01:00
02e93ffec6
spiFlashdb: fix bp_offset list
2022-02-26 17:02:38 +01:00
add794ab67
spiFlashdb: add microchip SST26VF032B
2022-02-26 16:31:41 +01:00
aada7fe26b
spiFlash: when no subsector_erase compute end_addr with correct block size
2022-02-26 16:17:49 +01:00
655f2c61ec
spiFlash: add no block protect use case
2022-02-26 16:15:50 +01:00
3cfdfb1856
Update board.hpp
...
Use default cable. This is equivalent to 6MHz setting, albeit more versatile.
2022-02-21 23:05:37 -04:00
d4e8eef676
Add board and cable defaults for genesys2
2022-02-21 08:11:57 +00:00
52696309bb
spiFlashdb: spansion S25FL256S
2022-02-21 08:27:33 +01:00
7a7f1723ea
add support for colorlight-i9
2022-02-20 01:41:17 +01:00
6059c9dbfb
Remove the Tigard default cable, as the board does not have an on-board JTAG adapter.
2022-02-19 17:14:49 +10:30
7022e2101a
Add support for the QMTech Kintex7 Core Board
2022-02-19 14:22:55 +10:30
1cb85a5a21
Add support for the Spansion S25FL256L flash on the QMTech Kintex 7 board
2022-02-19 14:22:26 +10:30
905e96dfec
Add digilent_zybo_z7 10/20 support
2022-02-15 21:01:11 -08:00
5099b57ce3
Merge pull request #174 from tarikgraba/master
...
Add support for Terasic DE1-SoC board
2022-02-09 20:14:38 +01:00
56457a4023
Merge pull request #173 from rstephan/tables
...
Nicer layout for the boards/fpga/cables table
2022-02-09 18:17:35 +01:00
63c9ec01b7
Fixed right alignment problem.
2022-02-09 17:55:16 +01:00
5aa34c6364
board: add Terasic DE1-SoC board
2022-02-09 17:22:38 +01:00
d188314ae3
part: add altera 5CSEMA5 (cyclone V Soc)
2022-02-09 17:21:19 +01:00
a0ef85d516
display: use a less dark blue
2022-02-09 08:33:21 +01:00
687503673e
jtag: for unknown IDCODE display a more complete error
2022-02-09 08:32:41 +01:00
0a43d1b797
part: add map manufacturer id <-> name
2022-02-09 08:32:06 +01:00
12c5e6ba19
Nicer layout for the boards/fpga/cables table
2022-02-08 19:31:37 +01:00
498c01889f
spiFlash: fix overflow test ( #172 )
2022-02-07 07:44:11 +01:00
350570ad2d
board: add tangnano1k to board_list
2022-01-28 13:53:33 +02:00
977900954e
part: add GW1NZ-1
2022-01-27 22:55:21 +02:00
db407a4263
adding xilinx AC701 development kit
2022-01-26 16:42:03 +01:00
f30cca46d8
no dash for zedboard fpga name
2022-01-26 16:29:35 +01:00
0d1905425c
add board zc702 in board.hpp
2022-01-26 16:21:52 +01:00
b4ffe4bf66
xilinx: fix typo
2022-01-24 18:58:32 +01:00
acf677dd46
tangnano9k: new board, with the same cable w/ tangnano4k
...
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2022-01-22 20:51:05 +08:00
dc4a454b94
gowin: add support for GW1NR-9C
...
GW1NR-9C has a different idcode with GW1NR-9.
Add support for it by adding the idcode.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2022-01-22 20:49:35 +08:00
fb2aadadad
cable: adding Olimex ARM-USB-OCD-H
2022-01-20 19:37:50 +01:00
1ab454359f
ftdiJtagMPSSE,ftdipp_mpsse: fix verbose level -> must be an int8_t not uint8_t
2022-01-19 18:42:15 +01:00
5365a9f9cf
ice40: program_cram, add TN ref
2022-01-18 08:37:07 +01:00
eb462d2bec
main: bitstream default target depends on mode spi/jtag
2022-01-18 08:09:54 +01:00
60ba2b1ccc
ice40: add CRAM support
2022-01-18 08:08:48 +01:00
dbc6551a3c
part: add Kintex 160T
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2022-01-14 09:01:23 +01:00
ecc76baa97
board: alinx AXU2CGA
2022-01-13 08:55:26 +01:00
904bf46315
part: adding zynqmp xczu2cg idcode
2022-01-13 08:48:53 +01:00
f44f92ea4b
xilinx: adding zynqmp support and a method to init this family of devices
2022-01-13 08:41:38 +01:00
dddee79f53
jtag: adding method to inject device into active device list
2022-01-13 07:42:14 +01:00
1f59dfd671
jtag: improving jtag chain detection: now searching for masked and unmasked idcode
2022-01-13 07:34:00 +01:00
796483f61f
jtag: fix shiftIR: bypass_after must be computed in all case
2022-01-09 15:38:37 +01:00
ce7f4566c3
board: ulx3s_dfu
2021-12-24 18:10:22 +01:00
2c5a162cc4
dfu: add debug level, only print device open fails in debug mode
2021-12-24 15:48:16 +01:00
17a874fc04
main: fix SPI access
2021-12-24 11:19:30 +01:00
cbae44e1ee
ice40: flash reset powerup are done into spiFlash
2021-12-24 11:13:36 +01:00
39ed7ec7f1
colognechip: suppress warnings
2021-12-24 10:29:21 +01:00
310d21ebf5
dfu: when libusb_open fails: skip device instead of error and stop
2021-12-24 10:26:31 +01:00
35efeb3eee
dfu: check libusb_open return value in searchDFUDevices
2021-12-23 14:08:54 +01:00
f943a8d3f0
Merge branch 'master' of github.com:trabucayre/openFPGALoader
2021-12-23 10:29:59 +01:00
3244f2e92a
dfu: fix memory leak
2021-12-23 10:29:47 +01:00
4cab198915
colognechip integration: create CologneChip SPI object in dynamic fashion as well
2021-12-23 08:54:48 +01:00
0979194da2
dfu: force USB reset when download end in DFUIdle state
2021-12-23 07:22:06 +01:00
db92ea068c
main: add protection for all devices. Add CLI args
2021-12-22 19:12:33 +01:00
fefea9fe8e
board: generic FTDI SPI
2021-12-22 19:12:02 +01:00
45f7f72030
all devices: add support to (un)protect flash, implement pre/post flash access. Use new spiInterface methods
2021-12-22 19:11:35 +01:00
af14e9b518
ftdispi: pre/post flash access
2021-12-22 19:09:04 +01:00
ffa90fb6fb
ftdipp_mpsse: better verbose level
2021-12-22 19:08:44 +01:00
b25e2e0125
spiFlash: enable/disable protection. now handle correctly device with protection enabled
2021-12-22 19:07:00 +01:00
21b44fc22f
spiInterface.hpp: add constructor, (un)protect flash, and generic pre/post flash access methods
2021-12-22 19:05:21 +01:00
7e91d97828
device.hpp: add (un)protect flash methods
2021-12-22 19:03:57 +01:00
de2917428e
spiInterface: add common method to (un)protect, write and dump SPI flash content
2021-12-22 19:01:58 +01:00
55d5cba9fb
spiFlashdb: add spansion S25FL 064P/128P
2021-12-22 18:59:52 +01:00
50bdbde809
spiFlashdb: add micron N25Q32
2021-12-22 18:58:51 +01:00
5df1d9775d
spiFlashdb: add windbond w25q devices
2021-12-22 18:58:07 +01:00
b18191b0ba
spiFlashdb: fix tb_offset for ISSI devices
2021-12-22 18:57:34 +01:00
496e6678ec
spiFlashdb: introduce conf register for tb
2021-12-22 18:56:53 +01:00
56a1e0310d
board: add arty S7 50
2021-12-21 18:21:39 +01:00
03c7d7faad
arty A7 100t support
2021-12-21 07:02:48 +01:00
f3e9a9fa6d
digilent_arty_z7 10/20 support
2021-12-20 18:10:17 +01:00
ee7570b251
zynq xc7z010 support
2021-12-20 18:09:52 +01:00
e026aa28c7
Digilent arty s7 25
2021-12-19 17:35:23 +01:00
37abf105aa
xilinx: use gz file by default
2021-12-19 17:34:14 +01:00
648f5e8bdb
size_t is actually unsigned
2021-12-18 17:03:52 +03:00
bae403c3a9
efinix/titanium: add missing JTAG idcode
2021-12-14 09:16:08 +01:00
18349fb6e8
efinix: add support for Titanium Ti60 f225 dev kit
2021-12-13 22:13:29 +01:00
1c91928175
Merge branch 'master' into colognechip/gatemate
2021-12-13 10:18:41 +01:00
1e1b93c27a
colognechip integration: introduce waitCfgDone() and check for raw data
2021-12-12 15:34:25 +01:00
e252e713dd
colognechip integration: apply review remarks
...
* add missing #include <string>
* add comment to part.hpp why highest nibble should be kept
* remove _reverseOrder variable from colognechipCfgParser.{hpp,cpp}
* rename cfgDone() to to a more meaningfull waitCfgDone()
2021-12-12 11:55:10 +01:00
dd0d668d96
colognechip integration: update code style
2021-12-11 16:36:29 +01:00
e4971897d7
jtag: ckeck highest nibble to prevent confusion between Cologne Chip GateMate and Efinix Trion T4/T8 devices
2021-12-11 16:35:30 +01:00
bc610383cd
part: add support for Anlogic ELF2 EF2M45
...
Anlogic EF2M45 is a FPGA with a co-packaged 4Mbit SPI Flash, and the
JTAG interface is the same with EG4S20.
Add support for it by adding it to the part database.
SPI Flash programming and SRAM programming are both tested.
The support of EF2M45 is also documented in this commit.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2021-12-11 02:12:32 +08:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
e182a53659
dfu: don't check filename -> let configBitstreamParser to do check
2021-12-07 14:17:09 +01:00
dfed1d1799
configBitstreamParser: cleanup
2021-12-03 07:21:22 +01:00
9005b2880b
CMakeList/configBitstreamParser: add optional zlib-ng support. No zlibxx is required
2021-12-02 07:20:58 +01:00
7ceaab0126
spiOverJtag: add bitstream for ECP4CE15F23
2021-11-28 16:51:42 +01:00
49b6bc6ce3
device: check if it's a compressed file -> extract real extension
2021-11-26 07:35:03 +01:00
ac09ac9b96
Merge branch 'trabucayre:master' into master
2021-11-25 15:10:14 +00:00
8fc67762f6
merged
2021-11-25 15:09:38 +00:00
c06e920143
updated to set authentication mode
2021-11-25 14:59:37 +00:00
7fe0a5ab66
wip: adding pubkey programming
2021-11-25 14:50:33 +00:00
7e7e030661
wip: adding pubkey programming
2021-11-25 14:13:17 +00:00
7a19f94f19
add zlib support (currently limited to altera spiOverJtag)
2021-11-25 08:11:50 +01:00
70e9671b3a
device: if filename has no extension -> use raw type
2021-11-24 07:35:33 +01:00
533cd64f37
lattice: if unknown file type, fails only for SRAM
2021-11-24 07:35:10 +01:00
98a025d68e
lattice: improve message for idcode mismatch
2021-11-22 07:01:19 +01:00
9f4ed8aaf6
latticeBitParser: fix loop type
2021-11-20 18:36:09 +01:00
2e2e325a9b
lattice: check matching idcode between bitstream and FPGA
2021-11-20 17:01:40 +01:00
ab43af7f0e
latticeBitParser: extract FPGA idcode from configuration data
2021-11-20 17:01:13 +01:00
1637d6f484
lattice: fix REG_STATUS_CNF_CHK_MASK offset: not the same for machXO3D and others
2021-11-20 16:57:31 +01:00
7f6a68ae2c
lattice: cppcheck/lint
2021-11-20 16:07:53 +01:00
5f78204f22
Merge pull request #130 from abacomartin/master
...
adding support for MachXO3D
2021-11-20 15:35:01 +01:00
482141c556
verbose/verify modifications + common code moved to calling func + more white space!
2021-11-19 15:21:52 +00:00
393bf1d28b
Unused variables (plus some more white space fixes)
2021-11-19 15:11:02 +00:00
7ed432cba2
board: add QMTECH Cyclone IV Core Board
2021-11-14 08:45:11 +01:00
48c326130a
part: EP3C16 and EP4CE15 have same idcode
2021-11-14 08:44:39 +01:00
952084cd1d
all jtag interface: don't convert verbosity level to bool
2021-11-11 17:42:51 +01:00
8df01663ff
main: raise error when board name is provided but not found
2021-11-11 17:20:51 +01:00
07752c37e2
fix up line endings and white space issues - also moved the flash sector if block into MachXO3D family - as not required for other types
2021-11-11 09:04:50 +00:00
b6979f54f7
adding support for MachXO3D
2021-11-09 08:54:09 +00:00
3b15a633fa
ch552_jtag: cleanup and fix buffer flush with previous libftdi version
2021-11-06 10:52:53 +01:00
745844f0a0
ftdipp_mpsse: check mpsse_write return value
2021-11-06 10:33:48 +01:00
f843dc2eb2
ch552_jtag: driver for ch552_jtag firmware (ft2232c clone)
2021-11-06 10:33:25 +01:00
fb6a3b9f03
all cables: writeTMS len int -> uint32_t
2021-11-06 10:31:00 +01:00
28620f8ce9
altera: check file type: for an unknown type user has to explicitly provides flash mode fails otherwise
2021-11-06 08:37:14 +01:00
b27422cbe9
Merge branch 'master' of github.com:trabucayre/openFPGALoader
2021-10-23 08:44:28 +02:00
649554f3fd
efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface
2021-10-23 08:44:23 +02:00
859c1a1a0f
spiFlash: erase using 4 or 64Kb
2021-10-20 08:00:21 +02:00
c043da874c
spiFlash: enable_protection method
2021-10-20 07:43:47 +02:00
3730e8189d
spiFlash: extract status register display from read_status_reg
2021-10-19 07:06:46 +02:00
6714400909
spiFlashdb: introduce tb_register to know tb location register
2021-10-19 06:55:30 +02:00
d8b8afce99
spiFlash: fix len_to_bp mask
2021-10-18 07:34:27 +02:00
7d8c8b2dcb
Add Trion T120 BGA 576 Dev Kit support.
...
This Dev Kit uses a FT2232 chip, so also rename efinix_spi with efinix_spi_ft4232
and introduce efinix_spi_ft2232.
2021-10-15 09:20:36 +02:00
103de667f7
protection descriptor for IS25LP128
2021-10-14 20:55:42 +02:00
eb545b5256
typo
2021-10-14 20:52:46 +02:00
4b3755f368
cmsisDAP: fix buffer length
2021-10-13 07:16:30 +02:00
b1b1e5a4a8
main: don't limit vid/pid to dfu
2021-10-13 06:51:22 +02:00
de88698b0c
cmsisDAP: close device and context after use/ when fail
2021-10-13 06:46:05 +02:00
2d26b9d485
cmsisDAP: typo
2021-10-12 16:38:03 +02:00
6a4d24cf7a
cmsisDAP: send disconnect after use
2021-10-12 07:52:38 +02:00
dd4e3e40df
spiFlash: typo
2021-10-10 18:27:41 +02:00
ddcf8fd1b1
spiFlash: add flash_model, method to convert len to block protect and block protect to len
2021-10-10 18:26:04 +02:00
22c095547e
spi: introduce list of known spi flash devices (required for protection)
2021-10-10 18:25:09 +02:00
4c2a091ab1
xilinx: introduce coolrunner-II support
2021-10-06 08:46:00 +02:00
69ac10e2f7
Merge branch 'master' of github.com:trabucayre/openFPGALoader
2021-10-03 18:34:07 +02:00
6858cabc7d
main: introduce vid/pid args
2021-10-03 18:33:55 +02:00
2adf4d585e
dfu: throw exception when vid & pid == 0; change altsetting type
2021-10-03 18:33:07 +02:00
e6c01f75ad
board: fix altsetting default for non-DFU boards, use signed type
2021-10-03 18:31:55 +02:00
f6dfee2db0
xilinx: Adapt wait times with JTAG frequency.
...
Allowed frequency is up to 10 MHz according to xc95XXXxl_1532.bsd
2021-10-03 17:37:28 +02:00
c165154317
xilinxMapParser: typo
2021-10-03 16:46:12 +02:00
1233459528
xilinxMapParser: fuse mapping for xc2c jed
2021-10-03 16:25:41 +02:00
a38d0b2d36
board: force 0 for altsetting in non-DFU type
2021-10-03 15:23:21 +02:00
144e376d36
board: add support for 1bitsquared iCEBreaker-bitsy
2021-10-03 12:42:35 +02:00
ea613fa97a
dfu/main: add args to select altsetting and add filter to select corresponding interface
2021-10-03 12:39:06 +02:00
abef1f4968
add verbose-level args: -1 quiet, 0 normal mode, 1 verbose, 2 debug lowlevel
2021-10-03 08:22:35 +02:00
28cbd1faad
spiFlash: workaround for dump > 1M
2021-10-02 19:25:04 +02:00
fe1634897f
part: merge ECP5-12 & ECP5-25 (same idcode)
2021-10-02 15:20:55 +02:00
2e64a52cb5
Merge pull request #118 from UweBonnes/mpsse_toggle
...
ftdiJtagMPSSE: Fix TCK toggle for large numbers.
2021-09-29 06:31:50 +02:00
f9a62b418b
ftdiJtagMPSSE: Fix TCK toggle for large numbers.
2021-09-28 21:06:46 +02:00
8ec009fcea
part.hpp: Fix wrong description of XC95288XL
2021-09-28 12:33:14 +02:00
cee91fa5a1
jedParser: p2
2021-09-25 15:06:47 +02:00
bd903be6b6
jedParser: fix checksum when configuration data size is not multiple of 8bits
2021-09-25 15:06:13 +02:00
36783d74c4
progressBar: Use only stdout.
...
The progress markers of the progress bar were output to stderr while the
rest was output to stdout. Move everything to stdout.
2021-09-20 15:14:23 +02:00
3698b98976
ftdiJtagMPSSE: improve a bit USB transaction
2021-09-18 14:54:40 +02:00
57c0f16be4
ftdipp_mpsse: typo in setClkFreq
2021-09-16 07:41:05 +02:00
85b53b5918
add gowin external spi in bscan and --external-flash option
2021-09-15 20:18:49 +02:00
ae2fcfdca1
main: args. Fix comments for load and write bitstream
2021-09-13 14:10:42 +02:00
b70bd83ced
Merge branch 'trabucayre:master' into master
2021-09-03 08:52:18 +02:00
2ef040774e
fsparser: gw1nsr-4c idcode/nb_line
2021-09-03 07:47:58 +02:00
23cf631b85
fix part name GW1NSR-4 -> GW1NSR-4C
2021-09-02 14:56:22 +02:00
11bdebd884
adding reference to Tang Nano 4K kit in doc
2021-09-02 13:54:34 +02:00
94385a758e
adding IDCODE for GW1NSR, for Tang Nano 4K kit
2021-09-02 13:46:35 +02:00
bb69297ed0
xilinx: with XCF reconfigure FPGA after write
2021-08-30 17:15:45 +02:00
2606bf7017
xilinx/doc: add spartan3 and XCF flash
2021-08-30 15:08:11 +02:00
92a4b9bcd8
jtag: fix idcode mask and display
2021-08-28 16:31:24 +02:00
304ec0071c
mask idcode upper nibble (version in IEEE 1149.1)
2021-08-27 15:10:12 +02:00
faedb0cfd7
lattice: throw exception when program fails
2021-08-23 16:27:28 +02:00
74b8305730
xilinx: test parse return for jedec instead of catch exception
2021-08-20 09:54:43 +02:00
db5d4e75d9
jedParser: fix checksum for xc9500
2021-08-20 09:44:38 +02:00
521c703842
part: add xc95 family idcode
2021-08-18 15:41:39 +02:00
b61884614e
xilinx: add support for XC95 CPLD family
2021-08-18 15:38:49 +02:00
471fbb6a81
jedParser: add xilinx compatibility
2021-08-18 15:38:24 +02:00
274d4ea2dc
main: fix display order for detect
2021-08-18 07:40:25 +02:00
c47b494311
jtag: add access to targeted idcode
2021-08-18 07:39:23 +02:00
630d4428c6
main: DFU mode: pass board vid/pid
2021-07-17 08:36:32 +02:00
cbe2bf5494
dfu: try to open dfu vid/pid, next board vid/pid. without vid/pid download is forbidden. Simplify detection in not enumerate mode. Display iProduct
2021-07-17 08:36:13 +02:00
b8e2939776
board: add vid/pid for DFU at board level
2021-07-17 08:34:44 +02:00
7113f4b36b
part: add Gowin GW1N-2
2021-07-16 07:42:34 +02:00
651fdd8beb
ftdixx: improve workaround for arty. Not required with a classic ft2232
2021-07-14 19:09:39 +02:00
cd64bce4f2
fix warning in Debug mode
2021-07-14 17:59:02 +02:00
be6ed217dd
main: display error message if program fails
2021-07-14 16:39:14 +02:00
1e0a06288d
configBitstreamParser: don't compute reverseByte, use a precomputed table: gain: 200ms for arty @30MHz
2021-07-14 08:44:22 +02:00
cc688d6db6
main: small fix
2021-07-14 08:07:51 +02:00
894cda820f
board: add default frequency option for BITBANG and SPI boards
2021-07-14 08:05:36 +02:00
13af012163
main: avoid potential miss with probe clock frequency
2021-07-14 08:04:43 +02:00
fd329158de
Merge pull request #98 from ultraembedded/master
...
Add board specific default frequency
2021-07-14 07:53:13 +02:00
acf7d2a0a8
ftdiJtagMPSSE: add work around to deal with freq >= 15MHz
2021-07-13 07:00:30 +02:00
594f065116
ftdipp_mpsse: use runtime_error instead of simple exception
2021-07-12 08:05:25 +02:00
f8831f329c
Only use board clock speed if user does not specify an alternate freq
2021-07-11 15:27:46 +01:00
797785ce93
Allow board configuration table to contain a default clock speed (as some boards are known to work at higher speeds safely). Move Digilent Arty to 10MHz (tested).
2021-07-11 15:20:15 +01:00
3983726a66
all devices: use spiFlash dump & verify
2021-07-11 11:34:14 +02:00
f5254294eb
altera: add verify and dump
2021-07-11 11:32:35 +02:00
b77c5a22df
spiFlash: add verify and dump method
2021-07-11 11:32:10 +02:00
f19d0996a4
progressBar: limit resolution
2021-07-11 11:30:02 +02:00
6639f0646a
board: pipistrello: add spi flash support
2021-07-11 08:58:40 +02:00
c90a4b7734
altera: spi flash support for cycloneV and qmtech
2021-07-10 08:20:27 +02:00
0c4aedcb23
altera: add spi flash support for de0nano (EP4CE22F17C6)
2021-07-09 07:40:55 +02:00
c99f5aa4e6
main: update to pass device type and prog type to altera class
2021-07-08 20:54:12 +02:00
84bd19b19a
board: cyc1000: add fpga model
2021-07-08 20:53:20 +02:00
c29fbb15f9
altera: use new epcq interface, add device type and prog type. Now more generic and not specific to cyc1000
2021-07-08 20:52:46 +02:00
0d4b6143b5
epcq,spiFlash: epcq is now a subclass of spiFlash (real different part is power_(up|down) and read_id
2021-07-08 20:51:51 +02:00
f937cb9ab5
Adds support for the xc6slx100fgg484.
...
Tested on a Pano Logic G2.
2021-07-03 05:01:56 -04:00
8068c84ec8
board: add Fomu support
2021-06-29 13:49:33 +02:00
8f95303daf
move to APACHE-2.0 license
2021-06-26 15:24:07 +02:00
b2d2fa0127
ftdipp_mpsse: with 1.5 reatach may be automatic
2021-06-26 15:04:57 +02:00
c1f18cd1d3
jtag: fix unsigned vs signed
2021-06-26 08:47:37 +02:00
98a2e836fa
ice40: add support for verify and dump
2021-06-26 08:43:02 +02:00
fb8f50cb52
ice40: indent
2021-06-26 08:34:41 +02:00
79a0e84f1f
efinix: add support for verify and dump
2021-06-26 08:34:12 +02:00
b92a9adca7
ftdispi: improve write/read
2021-06-26 08:06:26 +02:00
d32b81037a
xilinx: add dumpFlash support
2021-06-25 11:28:19 +02:00
2af64e9af4
all: propagate verify with a message when not supported
2021-06-25 08:58:45 +02:00
fe0a315456
lattice,device: introduce method to dump flash content
2021-06-24 18:20:34 +02:00
c471d25bb5
xilinx,lattice,device: add verify write into flash
2021-06-24 18:08:02 +02:00
b150bbdd23
gowin: checks if fs is targeted for connected device
2021-06-24 08:57:18 +02:00
5e11b3cb67
cmsisDAP: Remove product string check.
2021-06-22 23:59:57 +02:00
7fc0703167
cable: Add support for Orbtrace.
2021-06-22 23:59:46 +02:00
40d9bc3ea7
dirtyJtag: cpplint/cppcheck
2021-06-20 16:39:19 +02:00
0a7fd93a08
dirtyJtag: update _clkHZ with current frequency
2021-06-20 16:28:46 +02:00
8d20c09791
dirtyJtag: fix toggleClk call (TMS is high, TDI depends on last_bit)
2021-06-20 16:28:18 +02:00
26f5dd3ee5
Merge pull request #92 from phdussud/master
...
dirtyJtag optimizations to cut the number of USB requests
2021-06-20 16:26:53 +02:00
827767b99f
add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode
2021-06-20 10:26:05 +02:00
80f642a0a4
Fix a buffer overflow per code review
2021-06-19 12:39:25 -07:00
cbbac0bff8
Changes per code review.
2021-06-19 09:40:33 -07:00
dddfcbc973
board: add support for colorlight I5
2021-06-19 17:30:47 +02:00
53c5d35da6
add cmsis dap (hid) support
2021-06-19 17:30:23 +02:00
00289503dd
README: add ZedBoard, de0nanoSoc and de10nano support
2021-06-19 15:33:26 +02:00
b4fe045060
fsparser: don't try to analyze header after then end of header area
2021-06-18 13:33:40 +02:00
f84cb403e4
dirtyJtag optimizations to cut the number of USB requests
2021-06-13 11:38:30 -07:00
eaed746cf2
Add a few more Spartan6 based parts and boards (tested on an old miniSpartan6+).
2021-06-13 17:55:56 +01:00
2bf7b255b3
lattice: move directly to run_test_idle with last tx packet in program_mem
2021-06-12 09:27:16 +02:00
2214a7e720
Merge remote-tracking branch 'origin/master' into JTAG_chain
2021-06-12 08:44:18 +02:00
b5f2506fd1
clkHZ: be more generic
2021-06-12 08:40:40 +02:00
dc003f6212
As per feedback, allow 232H devices to have upper bank pins configured on init.
2021-06-11 11:24:57 +01:00
291f1b6d6f
Add support for Digilent Digital Discovery and Analog Discovery 2 (openFPGALoader -c digilent_ad)
2021-06-10 22:38:17 +01:00
3abc591bd5
Add LCMXO2-1200HC
2021-06-06 13:30:13 -07:00
0cae46b367
configBitstreamParser: fix CRLF vs LF: use fread with FILE (or stdin) instead of c++ stream
2021-05-26 17:56:21 +02:00
b28ae236a1
fsparser: drop CR at the end of line
2021-05-26 17:40:16 +02:00
d3a5b712b4
part: cycloneV Soc 5CEMA4 -> 5CSEMA4, add 5CSEBA6 idcode
2021-05-21 12:37:16 +02:00
fc08249630
lattice: don't use read_write
2021-05-18 08:27:34 +02:00
c36d29e5e3
gowin: don't use read_write
2021-05-16 12:13:31 +02:00
a160cc6431
board: add terasic de0nanoSoc
2021-05-15 19:32:49 +02:00
a96fbcc99a
board: add digilent zedboard
2021-05-15 19:31:39 +02:00
ba92456597
part: add zynq 7020
2021-05-15 19:31:20 +02:00
2f38461826
main: fix default args.index_chain
2021-05-15 19:30:45 +02:00
9e260c1e05
xilinx: don't use read_write
2021-05-15 18:43:54 +02:00
181303ce8c
anlogic: don't use read_write
2021-05-15 15:39:37 +02:00
27af85dc19
main: add option to specify device index
2021-05-15 15:26:09 +02:00
acf4ab270c
main: rework fpga detection to allows more than one device in a chain, but only FPGA is allowed
2021-05-15 15:08:27 +02:00
8b34448ed0
jtag: add logic to handle multiple device in JTAG chain
2021-05-15 14:59:06 +02:00
a242168e7f
jtag: shiftxR: don't try to move to shift when not required
2021-05-15 09:05:48 +02:00
5da47a0200
jtag: propagate getClkFreq
2021-05-15 08:46:21 +02:00
3d60cd647f
altera: adapt delay according to clock freq
2021-05-15 08:35:16 +02:00
610a76f653
jtagInterface/cables: introduce getClkFreq
2021-05-15 08:32:51 +02:00
c4e58073c1
part: add irlength and introduce new structure for device not handled (CPU) mainly for irlength
2021-05-14 16:35:26 +02:00
49ba5f265a
add support for usb-blasterII
2021-05-13 16:11:22 +02:00
42b7279a4b
main: add optional probe-firmware
2021-05-13 16:07:40 +02:00
167d430c34
usbBlaster: add a low level to support both usbBlasterI(ftdi) and usbBlasterII(fx2)
2021-05-13 16:06:29 +02:00
dc884b86c8
fx2_ll: cypress fx2 low level
2021-05-13 15:28:00 +02:00
c09bc0662b
ihexParser: new parser for (i)hex files
2021-05-13 12:14:52 +02:00
6ae29125ed
spiFlash: add a workaround for microchip SST26VF032B / SST26VF032BA
2021-05-05 06:59:02 +02:00
c82257c9ba
spiFlash: introduce jedec_id
2021-05-05 06:25:00 +02:00
200bc6364e
fsparser: fix checksum with GW1NS-2C, when configuration data is smaller than theory
2021-04-26 19:28:44 +02:00
e2b40e1350
xilinx: supress useless test in spi_wait
2021-04-22 19:06:36 +02:00
a4ccdae7df
add basys3 support
2021-04-20 21:28:14 +02:00
7039465353
rework xilinx fpga spiOverJtag to respect model/package
2021-04-19 21:17:08 +02:00
65a1e995ec
xilinx: be more verbose when spiOverJtag not available
2021-04-19 21:08:11 +02:00
858d9e6273
add support for Alchitry Au
2021-04-16 21:20:30 +02:00
4defec0db1
add support for artix 7 75t
2021-04-15 15:38:36 +02:00
4e2b1aa73e
cable: add SecuringHardware Tigard programmer
2021-03-27 18:43:56 +01:00
32d3872f69
part.hpp: sort altera cyclone V device by alphabetical order
2021-03-27 18:31:39 +01:00
508635f788
Merge pull request #80 from emard/master
...
recognize altera cyclone V 5CEBA4 FPGA
2021-03-27 18:30:28 +01:00
fa70a9a3b2
part.hpp: sort xilinx device by alphabetical order
2021-03-27 18:25:52 +01:00
52efdab421
recognize altera cyclone V 5CEBA4 FPGA
2021-03-27 02:00:18 +01:00
16f85fff63
add support for kintex xc7k325t
2021-03-24 17:25:05 +01:00
f33d30dbce
main: fix bitbang check: config pins must be the shift value
2021-03-21 18:51:13 +01:00
630a976884
add support for cycloneIII and Terasic DE0 board
2021-03-20 12:23:17 +01:00
ea141fdcfe
Remove spurious files in previous commit
2021-02-27 13:25:22 -08:00
e9b1a2e610
fix for space
2021-02-27 13:19:25 -08:00
6e96d8f6d0
Conditionalization of ftdi_tcioflush
2021-02-27 13:12:21 -08:00
5d8ec9a162
Attempt to satisfy a comment from the owner
2021-02-27 12:45:12 -08:00
fdd1037d46
Remove temporary support for a hypotetical version based on Teensy 4
2021-02-27 11:35:45 -08:00
94ef653682
Resolved bunch of comments from owner
2021-02-27 10:37:07 -08:00
9ee8e84fba
Support for new DirtyJtag2 protocol. Merged with head
2021-02-27 09:59:38 -08:00
43caa612ca
lattice: drop the limitation, for .bin, to write at offset > 0
2021-02-27 06:49:42 +01:00
6d1c51d0a4
fix purge buffer fix libftdi >= 1.5
...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
2021-02-25 13:37:33 +01:00
566d33c2f1
progressBar: use chrono instead of clock
2021-02-24 13:31:55 +01:00
16932786db
all parser:
...
- _raw_data is now filled in configBitstreamParser
- source may be a file or a pipe
- displayHeader become a common method (configBitstreamParser)
- improve/rewrite some parser (efinixHexparser 1s -> 11ms)
2021-02-24 06:36:48 +01:00
e27da3276f
Merge pull request #75 from Disasm/add-gw1ns-2c
...
Add support for GW1NS-2C FPGA chips
2021-02-21 18:48:16 +01:00
df52d523bf
All devices: new CLI argument to bypass file type autodetection
2021-02-21 18:30:13 +01:00
d226ab7671
Add support for GW1NS-2C FPGA chips
2021-02-21 17:31:09 +03:00
7cc5676e8e
ftdi: drop divide_by_5 param, now it's automatically set/unset according to the frequency. Better freq display
2021-02-19 07:07:10 +01:00
5f9a8835da
devices: simplify write RAM/Flash
2021-02-18 21:09:34 +01:00
48e65fa0ad
bitparser: drop garbage characters, use _hdr, best header parsing and display
2021-02-17 19:02:57 +01:00
4a555bb102
dfuFileParser: parser for bitstream with DFU suffix
2021-02-15 07:33:58 +01:00
Niklas Ekström
balika011
Gwenhael Goavec-Merou
Benjamin Koch
Icenowy Zheng
Rengifo, Rodrigo
Simon Buhrow
Mike Lewis
Xiretza
Hans Baier
Anders Ejdeling
Patrick Urban
Stephan Ruloff
Sylvain Munaut
Steven Koo
Jean THOMAS
Stéphane Chevigny
Rod Whitby
Torsten Reuschel
jonathan kimmitt
Hirosh Dabui
Hansem Ro
TG
Verneri Hirvonen
Fabien Marteau
Icenowy Zheng
Karol Gugala
uis
Franck Jullien
abacomartin
Martin Beynon
Florent Kermarrec
emard
Uwe Bonnes
Vegard Storheil Eriksen
Fabien Marteau
ultraembedded
Billy Stevens
phdussud
GEORGIOS KARNAS
Giuseppe Gebbia
phdussud
Vadim Kaushan