ff1e77debf
adds GCM board type and FT4232H interface B cable
2025-04-23 07:04:40 -06:00
d942c79f62
jtag: added method to retrieves number of devices in the JTAG chain
2025-04-22 18:59:19 +02:00
bdeb74b61e
Add support for Numatolab Neso board. Programming SRAM over USB works, when board jumpers are set for JTAG programming mode. SPI flashing does not work properly (does not boot).
2025-04-21 21:17:54 +02:00
198cfbe604
ihexParser: added type 04 (Extented Linear Address Record) and 05 (Start Linear Address Record)
2025-04-21 17:47:02 +02:00
c97369c241
spiFlash: only uses spi_put with distinct cmd parameter
2025-04-21 07:42:26 +02:00
6c0c38d0cc
esp_usb_jtag: added reference to esp32s3-jtag repository
2025-04-20 12:47:28 +02:00
b7967cf71a
esp_usb_jtag: improves
...
- esp_usb_jtag: added xfer method to handle/simplify libusb_bulk_transfer calls
- src/esp_usb_jtag.cpp: simplify some operations
- src/esp_usb_jtag.cpp: writeTDI: fixed rx buffer index, added a basic code to handle end transaction
- src/esp_usb_jtag.cpp: writeTMS: store and uses _tdi & _tms
- src/esp_usb_jtag.cpp: toggleClock: re-uses _tdi/_tms
- src/esp_usb_jtag.cpp: writeTDI: ditto
- esp_usb_jtag: fixed verbosity level/be more quiet
- esp_usb_jtag: fixed writeTDI with end and tms transition: now integrated instead of distinct sequence. Fixed TDI value with tms transition. Working with ECP5
- esp_usb_jtag: added optional parameter to lower timeout error (useful when it's time to flush the device)
- esp_usb_jtag: fixed writeTDI when tx is NULL
2025-04-18 07:32:37 +02:00
fa1d328b93
esp_usb_jtag: new cable
...
- copy dirtyjtag to esp_usb_jtag, it compiles
- copy protocol definiton, defines and private data/struct from openocd esp_usb_jtag.c
- ulx3s_esp board with esp32s3 cable
- esp_usb_jtag specify usb vid:pid in jtag.cpp
- hardcode usb interface and endpoints
- getting caps
- set chip id (not applicable for fpga)
- tms write done, untested
- cleanup and toggle clk
- 32bit counting
- setting divisor (todo read base freq)
- div range within 1-255
- base speed from descriptor
- fix doc typo with swapped tms/tdi some cleanup but it doesn't work.
2025-04-18 07:32:15 +02:00
d155bf6a35
Merge pull request #538 from nexthop-ai/nate-a7-15t
...
Add support for Artix A7 15t
2025-04-16 06:14:55 +02:00
68c7786f5f
Add support for xc7k480t
2025-04-09 21:01:16 +08:00
6e05a7fa25
Add support for Artix A7 15t
...
Tested on real hardware, connecting through Linux gpiod
2025-04-08 15:31:41 +00:00
ccb11ffe01
Merge pull request #534 from phdussud/master
...
Fix incompatibility with Lattice FPGA
2025-03-30 08:56:35 +02:00
6623ceff28
Fix incompatibility with Lattice FPGA
2025-03-29 17:23:02 -07:00
fd66d4a74a
Added support for Everspin MRAM (EM008LX, EM016LX, EM032LX and EM064LX)
2025-03-28 09:06:02 +01:00
5ced26c3f6
gowin: Improved eraseSRAM/SPI Flash prepare for Arora V devices
2025-03-26 13:14:39 +01:00
1698d6751e
part.hpp: add Xilinx xc7s75
2025-03-25 11:12:05 +01:00
f5ed5c4400
Merge pull request #529 from mer0m/master
...
kcu105: add support for secondary QSPI
2025-03-21 19:12:44 +01:00
b1f4c35312
Added support for MX25L25645G FLASH memory
2025-03-21 15:50:17 +02:00
671224a544
mcsParser: check if _bit_data size is not larger than bitstream
2025-03-21 06:47:30 +01:00
4e5fd9fabc
Merge branch 'kcu105_dual_qspi'
2025-03-20 20:47:12 +01:00
1c78344ca5
kcu105: add secondary qspi detection and dump
2025-03-20 20:11:02 +01:00
1bb69dcf22
kcu105: add fpga package in description
2025-03-20 20:09:46 +01:00
4c4f48ea93
fix to have an happy CI
2025-03-18 23:02:11 +01:00
414a7259f0
altera: uses --flash-sector to only update a subset of internal flash sectors
2025-03-18 22:42:00 +01:00
719697eabe
common: added function to split a string to a vector by using a delimiter
2025-03-18 22:39:44 +01:00
4a5a912b9d
mcsParser: fixed warnings
2025-03-17 07:25:13 +01:00
2ee72c0556
mcsParser: _bit_length/buffer size / addr sanity check
2025-03-17 07:19:19 +01:00
f86037231a
altera: added max10_mem_t in max10_memory_map for 10M16SA Max10 variant
2025-03-16 08:50:13 +01:00
1abb1c2453
altera: added sectors erase and UFM write
...
- updated max10_mem_t to have sectors erase addresses
- updated max10_flow_erase to perform a full erase or sectors per
sectors
- added a dedicated method to perform UFM erase and write without full
internal flash erase and with arbitrary file instead of POF
2025-03-15 07:45:16 +01:00
703af08c91
xvc_server: Make thread exit cleanly ( #526 )
2025-03-10 21:25:13 +01:00
b2c2ae80c0
Merge pull request #528 from mc-requtech/xvc-server-libgpiod
...
libgpiodJtagBitbang: add support for XVC server
2025-03-10 20:25:38 +01:00
a39aa2d43e
libgpiodJtagBitbang: add support for XVC server
2025-03-10 15:29:06 +01:00
6f29d9ecd1
ftdispi: fixed ft2232_spi_wr_and_rd: buffer is empty when transaction is read-only
2025-03-09 08:37:29 +01:00
6dbde4c368
gowin: Fix compilation on musl
2025-03-07 15:38:14 +01:00
3cf558ebe2
colognechip: added a workaround to drive reset pin with DirtyJTAG cable
...
(requires a recent DirtyJTAG firmware)
2025-03-07 07:19:39 +01:00
3c7324d14d
dirtyJtag: added SRST/TRST values. Added method to read/set GPIOs level
2025-03-07 07:19:14 +01:00
ab8d8fc0d3
gowin: Arora V: fix SRAM erase/load when flash is blank and timeout bit is set
2025-03-06 20:05:31 +01:00
ee8decdfe6
ftdispi: ft2232_spi_wr_and_rd: improved error messages
2025-03-02 09:11:49 +01:00
ecb22b2eeb
ftdispi: ft2232_spi_wr_and_rd: use dedicated buffer for MPSSE command to
...
avoid overflow. Simplify code, improve error message (issue #524 and
2025-03-02 09:00:49 +01:00
564485036e
doc/boards: added alinx_ax7201/alinx_ax703 entries.
2025-02-27 06:44:52 +01:00
c0cfc0cc57
Added alinx_ax7203 and alinx_ax7201 boards
2025-02-27 04:13:42 +01:00
989c8f8ccb
ftdispi: lowlevel init/MPSSE configuration before pins manipulation (issue #519 )
2025-02-26 19:48:42 +01:00
fbee81b1d0
efinix.cpp: programJTAG. Fixed IDCODE read 4 -> 32 (issue #520 )
2025-02-26 19:38:10 +01:00
2ff215dfff
board, efinix: added SPI variant for efinix t20 BGA256 board
2025-02-24 20:33:01 +01:00
c6e5ec9cb0
anlogicCable: fixed typo
2025-02-24 19:42:30 +01:00
a8d5247650
anlogicCable: added pinout + link
2025-02-23 09:00:30 +01:00
4b008a0196
anlogicCable: refresh with new VID
2025-02-23 08:59:08 +01:00
7ed62601c7
altera: fixed UFM: MAX10 memory is in reverse order, UFM1 is BEFORE UFM0
2025-02-16 15:30:30 +01:00
d61e147989
added 1.35v csg325 build and Macronix flash
2025-02-15 14:24:42 -07:00
c4d4e8db7e
doc/boards.yml, src/board.py: added tangconsole entry
2025-02-15 11:39:37 +01:00
79054f3fa1
Merge pull request #512 from antmicro/fix-null-values-in-stdout
...
Fix snprintf usage
2025-02-13 19:47:45 +01:00
b839792220
altera: added internal flash dump support for MAX10 devices
2025-02-02 20:50:06 +01:00
5f673c6f14
altera: max_10 -> max10
2025-02-02 09:11:14 +01:00
ab8bed3f26
altera: max10_program: respect _verbose variable
2025-02-02 09:10:37 +01:00
182e30b637
part,gowin,fsparser: added Gowin Arora V GW5AT-60 Variant
2025-02-01 12:19:34 +01:00
533dd1ea5f
altera: cosmetic/linter
2025-02-01 08:28:17 +01:00
959201a21f
altera: MAX10 fully rework POF to internal flash mapping, added UFM write and note related to internal flash sections vs POF UFM/CFM sections
2025-02-01 08:14:07 +01:00
c3170cdfb9
altera: MAX10: added pgm_success_addr/done_bit_addr
2025-02-01 08:12:04 +01:00
8e104d723c
pofParser: displayHeader: improve messages
2025-02-01 08:09:59 +01:00
6f42d28d5e
pofParser: honour CFM1/CFM2 data pointer
2025-02-01 08:09:29 +01:00
8160e716e8
pofParser: flag 0x11: added unknown section when verbose
2025-02-01 08:08:59 +01:00
8f46edc8b3
pofParser: parseHeader: better message + note
2025-02-01 08:08:34 +01:00
154bf5b5ec
pofParser: added flag 0x13 parsing with usercode extract
2025-02-01 08:07:42 +01:00
65afd7da0b
pofParser: getData/getLength: check if section exists: return data/length or null/-1
2025-02-01 08:06:59 +01:00
e8d8ecc363
Fix snprintf usage
...
Some code used snprintf on std::string objects.
This caused unexpected behaviour where '\0' was printed to the output file.
This commit adds intermediate char* buffer which is later used to
initialize std::string. This string is later resized to the correct
expected length.
Signed-off-by: Maciej Dudek <mdudek@antmicro.com>
2025-01-24 11:48:37 +01:00
5847ec2666
doc/boards.yml,src/board.hpp: fixed ac701 device code
2025-01-15 06:57:42 +01:00
f4fee37cea
Added STEP-MXO2_V2 board support.
2025-01-11 23:14:36 +08:00
79cf67e964
Added STEP-MAX10 V1 support.
2025-01-10 07:39:30 +08:00
867f18236e
Merge pull request #505 from steward-fu/master
...
Add Altera 10M02SCM153C8G Support.
2025-01-09 07:19:25 +01:00
ce92b577d5
Added 10M02SCM153C8G support.
2025-01-09 07:35:50 +08:00
fcaf836a40
Update ch347jtag.cpp
...
Update read/write timeout
2025-01-08 13:13:28 +08:00
7dac3ef447
altera: first draft for max10 native support (with pof and only for internal flash)
2024-12-31 18:42:52 +01:00
01039bc710
libgpiodJtagBitbang: simplify code when libgpiodv2 is used
2024-12-31 08:31:49 +01:00
2103316baf
lattice: added support for reset method (only tested with ECP5
2024-12-19 14:59:35 +01:00
318ebcab22
main.cpp: added default value for user_flash in struct arguments args
2024-12-15 16:45:39 +01:00
a06bae1f5e
part.hpp: cosmetic
2024-12-15 16:04:20 +01:00
46ff6cb2eb
gowin: Implement user flash programming for GW1N9
2024-12-11 12:19:07 +01:00
ffa006d0ee
Add 'user-flash' CLI argument
2024-12-11 12:01:37 +01:00
a1108ca981
gowin: Add GW1N9 detection
2024-12-11 11:49:29 +01:00
91608ca206
gowin: Use std::unique_ptr instead of manual RAII
2024-12-11 11:43:07 +01:00
daa91c9a41
src/part.hpp: Add Altera Max10 10M16SAU169C8G support (Used by LimeSDR Mini V1).
2024-11-26 16:02:28 +01:00
c0a9115be9
part.hpp: added Gowin GW2A-55
2024-11-26 07:25:30 +01:00
f6f48a7b27
Add support for VCU108 board and Virtex UltraScale
2024-11-12 23:51:55 +01:00
0fd653e353
xilinx: replaced reverseWord by configBitstreamParser::reverse_32
2024-11-09 11:26:45 +01:00
e75e15bb63
configBitstreamParser: added static method to switch bits for 32bits value
2024-11-09 11:26:02 +01:00
543be23d03
main,spiFlash,xilinx: fix warnings
2024-11-09 11:24:16 +01:00
7acd1f2014
Add Support for Altera Max II EPM240T100C5N Board
2024-10-16 08:53:21 -04:00
43fcc6ce2c
Add ID and spiOverJtag bitstream for Stratix V GS D5
2024-10-10 19:59:31 +02:00
406e99c93a
Add xc2c64a QFN48
2024-10-01 13:45:44 -04:00
9c9ce07ad8
feat: adding support for the xc7z030
2024-09-26 17:41:49 +01:00
8e67d2ee04
arguments: fix read_dna and read_xadc typo
2024-09-25 07:24:15 +02:00
abb64a6aa1
spiFlash: added S25FL128S display register
2024-09-23 07:16:23 +02:00
b6963ad4a9
spiFlash: added MX25L enable/disable quad + display status register
2024-09-23 07:14:23 +02:00
faa1fc76fc
core,xilinx,device: added option/methods to enable/disable quad mode on SPI Flash
2024-09-23 07:09:30 +02:00
242357c46f
spiFlash: added method to enable/disable Quad mode support
2024-09-23 07:06:05 +02:00
924de0a13a
spiFlashdb: added quad support for S125FL
2024-09-23 07:00:56 +02:00
81422b6ca3
Merge pull request #481 from acceleratedtech/jwise/ti180-soj
...
efinix: add spiOverJtag support for Ti180J484
2024-08-31 08:20:04 +02:00
ffd32a61d2
Efinix: do not allow untested detect_flash() non-SoJ path until someone tries it out for sure
2024-08-29 18:08:57 -04:00
fca69cc702
spiFlash: added configuration/nonvolatile configuration register for spansion and micron SPI Flash
2024-08-25 09:34:14 +02:00
5d6daed815
spiFlashdb: added quad bit mask and corresponding register
2024-08-25 09:32:13 +02:00
Mike Goelzer
Gwenhael Goavec-Merou
Bastian Löher
Gwenhael Goavec-Merou
Emard
Junhui Liu
Nate White
Patrick Dussud
Clemens Horch
Franck Jullien
vbuitvydas
bma
Marcus Comstedt
Marcus Comstedt
TarikHamedovic
AEW2015
Maciej Dudek
steward-fu
ZhiYuanNJ
Jean THOMAS
Florent Kermarrec
Nicolas Schodet
sab
Andreas Galauner
Miguel Flores-Acton
Shareef Jalloq
Joshua Wise