Diego Herranz
|
f115608cb1
|
Add Steppenprobe cable
https://github.com/diegoherranz/steppenprobe
Config taken from OpenOCD repo:
https://sourceforge.net/p/openocd/code/ci/master/tree/tcl/interface/ftdi/steppenprobe.cfg
|
2022-08-09 18:31:16 +02:00 |
Gwenhael Goavec-Merou
|
6a00466137
|
xilinx: flow_program/xc95: verify write: replace hardcoded number of sections by nb_section
|
2022-08-04 08:15:29 +02:00 |
Gwenhael Goavec-Merou
|
c6d79ec2e8
|
xilinx: flow_program/xc95: increase delay and use getClkFreq (issue #104)
|
2022-08-04 08:08:01 +02:00 |
Gwenhael Goavec-Merou
|
be46b2cfd6
|
prepare release 0.9.0
|
2022-07-26 21:14:30 +02:00 |
Gwenhael Goavec-Merou
|
df56450e96
|
doc/guide/install: add a note for libgpiod
|
2022-07-26 20:32:46 +02:00 |
Gwenhael Goavec-Merou
|
51628c38f5
|
typo
|
2022-07-26 20:29:11 +02:00 |
Gwenhael Goavec-Merou
|
6f59de7560
|
README: add missing args
|
2022-07-26 20:29:04 +02:00 |
Gwenhael Goavec-Merou
|
b4d343ce05
|
board: adding sipeed Tang Primer 20k
|
2022-07-26 20:25:43 +02:00 |
Gwenhael Goavec-Merou
|
93ff880a32
|
99-openfpgaloader.rules: reorder rules
|
2022-07-26 18:37:20 +02:00 |
Gwenhael Goavec-Merou
|
6c28318057
|
doc: typo
|
2022-07-26 08:33:53 +02:00 |
Gwenhael Goavec-Merou
|
a7279e1dd5
|
doc: Gowin: adding a note on howto recover the jtag when JTAGSSEL_N is used as GPIO
|
2022-07-26 08:18:44 +02:00 |
Gwenhael Goavec-Merou
|
18a3f941e1
|
99-openfpgaloader: update for Jlink
|
2022-07-26 07:07:53 +02:00 |
Gwenhael Goavec-Merou
|
2b5ff851a3
|
99-openfpgaloader: update for ORBTrace
|
2022-07-26 07:07:09 +02:00 |
Gwenhael Goavec-Merou
|
74ad3ed9f8
|
99-openfpgaloader: update for libgpiod
|
2022-07-26 07:05:00 +02:00 |
Gwenhael Goavec-Merou
|
b0af8e5e49
|
typo
|
2022-07-25 22:23:29 +02:00 |
Gwenhael Goavec-Merou
|
da088787f9
|
IRC channel
|
2022-07-25 22:22:42 +02:00 |
Gwenhael Goavec-Merou
|
e77b8fb022
|
Merge pull request #243 from balika011/master
Gowin GW1NSR-4C MCU support
|
2022-07-25 19:09:01 +02:00 |
Gwenhael Goavec-Merou
|
61aa0d4785
|
libgpiodJtagBitbang: update copyright + lint
|
2022-07-25 19:08:23 +02:00 |
Gwenhael Goavec-Merou
|
eeb1be0aeb
|
Merge pull request #242 from niklasekstrom/libgpiod_bitbang
Add JTAG driver for libgpiod bitbanging
|
2022-07-25 18:57:40 +02:00 |
balika011
|
421eefc605
|
MCU firmware isn't added to the checksum
|
2022-07-24 17:51:24 +02:00 |
balika011
|
e44af80776
|
use RawParser for gowin mcu flashing
|
2022-07-24 17:31:36 +02:00 |
balika011
|
c3d13e8b75
|
remove unneeded code
|
2022-07-24 17:30:59 +02:00 |
Niklas Ekström
|
62e6e5a0bf
|
Improve CMake handling of libgpiod
|
2022-07-22 10:26:46 +02:00 |
Niklas Ekström
|
bb6d286736
|
Remove unnecessary null check
|
2022-07-22 10:14:53 +02:00 |
Niklas Ekström
|
f69ce8a465
|
Only show libgpiod cable in list if enabled
|
2022-07-22 10:01:23 +02:00 |
Niklas Ekström
|
4ed3ff835c
|
Clarify code by using different API function
Use gpiod_chip_open instead of gpiod_chip_open_by_name, and thus avoid
having to remove "/dev/" prefix.
|
2022-07-22 09:52:12 +02:00 |
balika011
|
e847c3a7b0
|
Add connecting MCU to JTAG support for GW1NSR-4C
|
2022-07-20 23:32:21 +02:00 |
balika011
|
0581803def
|
Add MCU Firmware flashing support for GW1NSR-4C
|
2022-07-20 23:32:16 +02:00 |
Niklas Ekström
|
8d920d7ed0
|
Bugfix to allow NULL tx pointer
Also set the _clkHZ variable which is needed for timing operations
such as erase.
|
2022-07-18 18:09:34 +02:00 |
Niklas Ekström
|
12955b8711
|
Initial commit of libgpiod JTAG driver
Not tested yet.
|
2022-07-18 18:09:34 +02:00 |
Gwenhael Goavec-Merou
|
057ce931f8
|
cmake xvc_server: try again to fix built failure with ubuntu 19/20
|
2022-07-06 22:50:11 +02:00 |
Gwenhael Goavec-Merou
|
9de5926ff8
|
cmake xvc_server: try to fix built failure with ubuntu 19/20, reindent
|
2022-07-06 22:26:00 +02:00 |
Gwenhael Goavec-Merou
|
3e35944a4f
|
xvc_server: fix message size
|
2022-07-06 21:36:57 +02:00 |
Gwenhael Goavec-Merou
|
975c40a00a
|
enable xvc only for Linux OS
|
2022-07-06 21:14:25 +02:00 |
Gwenhael Goavec-Merou
|
a90a7b6fa5
|
main: enable xvc_server
|
2022-07-06 21:00:24 +02:00 |
Gwenhael Goavec-Merou
|
34ff4f4020
|
xvc_server: first draft
|
2022-07-06 20:58:19 +02:00 |
Gwenhael Goavec-Merou
|
e91ae5e65b
|
xvc_client: fix frequency convertion
|
2022-07-06 20:57:47 +02:00 |
Gwenhael Goavec-Merou
|
de42f8b239
|
ftdiJtagMPSSE: add writeTMSTDI method with full tms & tdi buffer. Always return TDO buffer
|
2022-07-03 21:44:03 +02:00 |
Gwenhael Goavec-Merou
|
f364ea2c8f
|
Merge pull request #239 from BBBSnowball/better-message-if-cmsisdap-disabled
cmsisDAP: better error message if support is not enabled
|
2022-07-02 22:30:18 +02:00 |
Gwenhael Goavec-Merou
|
7caf0e390a
|
Merge pull request #238 from BBBSnowball/cmsisdap-fix-crash
cmsisDAP: fix crash in case hid device cannot be opened
|
2022-07-02 22:29:21 +02:00 |
Benjamin Koch
|
8c9a86699b
|
cmsisDAP: better error message if support is not enabled
|
2022-07-02 17:24:02 +02:00 |
Benjamin Koch
|
80cf8edc31
|
cmsisDAP: fix crash in case hid device cannot be opened
|
2022-07-02 17:03:31 +02:00 |
Gwenhael Goavec-Merou
|
2f30668dbc
|
ORBTrace Mini support (DFU mode)
|
2022-06-18 22:55:58 +02:00 |
Gwenhael Goavec-Merou
|
702ca39300
|
stop using get_state and promote the use of get_status
|
2022-06-18 22:50:55 +02:00 |
Gwenhael Goavec-Merou
|
de2cdcb67a
|
ftdispi: add missing index param
|
2022-06-18 20:21:13 +02:00 |
Gwenhael Goavec-Merou
|
780ea66384
|
DFU: fix potential leak
|
2022-06-18 18:47:27 +02:00 |
Gwenhael Goavec-Merou
|
e21a251af3
|
DFU: fix detect -> bypass bitstream
|
2022-06-18 18:39:58 +02:00 |
Gwenhael Goavec-Merou
|
e278b87a64
|
Merge pull request #236 from Icenowy/gw2a
Add GW2A support
|
2022-06-16 07:06:41 +02:00 |
Gwenhael Goavec-Merou
|
0779034921
|
Merge pull request #233 from Icenowy/ep4ce115
Add EP4CE115 support
|
2022-06-16 06:23:35 +02:00 |
Icenowy Zheng
|
3e00756976
|
part: add GW2A(R)-18(C)
Add JTAG ID code for GW2A(R)-18(C), tested with GW2A-18C on Sipeed Tang
Primer 20K.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
|
2022-06-16 09:54:02 +08:00 |