Merge pull request #423 from jgroman/master

Add faulty MPSEE cmd 8E workaround

src/ftdiJtagMPSSE.cpp

@@ -34,6 +34,7 @@ FtdiJtagMPSSE::FtdiJtagMPSSE(const cable_t &cable,
 			const string &dev, const string &serial, uint32_t clkHZ,
 			bool invert_read_edge, int8_t verbose):
 			FTDIpp_MPSSE(cable, dev, serial, clkHZ, verbose), _ch552WA(false),
+			_cmd8EWA(false),
 			_write_mode(MPSSE_WRITE_NEG),  // always write on neg edge
 			_read_mode(0),
 			_invert_read_edge(invert_read_edge), // false: pos, true: neg
@@ -73,6 +74,12 @@ void FtdiJtagMPSSE::init_internal(const mpsse_bit_config &cable)
 		_ch552WA = true;
 	}
 
+	// This Sipeed firmware does not support MPSEE 0x8E, 0x8F commands properly
+	if ( (!strncmp((const char *)_imanufacturer, "SIPEED", 6)) 
+			&& (!strncmp((const char *)_iserialnumber, "2023112818", 10)) ) {
+		_cmd8EWA = true;
+	}
+
 	display("%x\n", cable.bit_low_val);
 	display("%x\n", cable.bit_low_dir);
 	display("%x\n", cable.bit_high_val);
@@ -174,8 +181,8 @@ int FtdiJtagMPSSE::toggleClk(uint8_t tms, uint8_t tdi, uint32_t clk_len)
 	 * with 2232H, 4242H & 232H
 	 */
 
-	if (_ftdi->type == TYPE_2232H || _ftdi->type == TYPE_4232H ||
+	if ((_ftdi->type == TYPE_2232H || _ftdi->type == TYPE_4232H ||
-				_ftdi->type == TYPE_232H) {
+				_ftdi->type == TYPE_232H) && !_cmd8EWA) {
 		uint8_t buf[] = {static_cast<uint8_t>(0x8f), 0, 0};
 		while (len) {
 			unsigned int chunk = len;

src/ftdiJtagMPSSE.hpp

@@ -106,6 +106,7 @@ class FtdiJtagMPSSE : public JtagInterface, public FTDIpp_MPSSE {
 	 */
 	void config_edge();
 	bool _ch552WA; /* avoid errors with SiPeed tangNano */
+	bool _cmd8EWA; /* avoid errors with Sipeed FT2232H emulation */
 	uint8_t _write_mode; /**< write edge configuration */
 	uint8_t _read_mode; /**< read edge configuration */
 	bool _invert_read_edge; /**< read edge selection (false: pos, true: neg) */

src/ftdipp_mpsse.cpp

@@ -91,6 +91,32 @@ FTDIpp_MPSSE::FTDIpp_MPSSE(const cable_t &cable, const string &dev,
 		printWarn(err);
 		memset(_iproduct,'\0', 200);
 	}
+
+	ret = (libusb_error)libusb_get_string_descriptor_ascii(_ftdi->usb_dev,
+		usb_desc.iManufacturer, _imanufacturer, 200);
+	/* when FTDI device has no iManufacturer, libusb returns an error
+	 * but there is no distinction between real error and empty field
+	 */
+	if (ret < 0) {
+		snprintf(err, sizeof(err),
+			"Can't read iManufacturer field from FTDI: "
+			"considered as empty string");
+		printWarn(err);
+		memset(_imanufacturer,'\0', 200);
+	}
+
+	ret = (libusb_error)libusb_get_string_descriptor_ascii(_ftdi->usb_dev,
+		usb_desc.iSerialNumber, _iserialnumber, 200);
+	/* when FTDI device has no iSerialNumber, libusb returns an error
+	 * but there is no distinction between real error and empty field
+	 */
+	if (ret < 0) {
+		snprintf(err, sizeof(err),
+			"Can't read iSerialNumber field from FTDI: "
+			"considered as empty string");
+		printWarn(err);
+		memset(_iserialnumber,'\0', 200);
+	}
 }
 
 FTDIpp_MPSSE::~FTDIpp_MPSSE()

src/ftdipp_mpsse.hpp

@@ -81,6 +81,8 @@ class FTDIpp_MPSSE {
 		int _num;
 		unsigned char *_buffer;
 		uint8_t _iproduct[200];
+		uint8_t _imanufacturer[200];
+		uint8_t _iserialnumber[200];
 };
 
 #endif