5dbb25f667
Set new default values.
...
Restructure the code a bit.
Two parameters for AM are required (offset and amplitude). Even if this
sounds needless, changing it would require a major effort.
2024-01-07 11:59:33 +01:00
4d0e65b3b6
Extend the error message
2024-01-07 11:56:56 +01:00
a4ae81ec06
We are developing towards ngspice-43
2024-01-06 23:14:26 +01:00
aaaad70991
Previous AM was buggy in V(I)SRC: Update to amplitude modulation
...
with corrected equation.
2024-01-06 23:09:27 +01:00
88d0727d3f
In PS compat mode we only have 2 nodes in a diode,
...
but still allow self heating diode with ngspice syntax.
2024-01-06 11:51:11 +01:00
ace932e1b9
Patches provided by Carsten Schoenert: Misspellings, File access
2023-12-31 13:51:05 +01:00
88844ba74d
Prevent vectors carrying the E POLY source current from being disaggregated
2023-12-31 13:32:45 +01:00
dd7b9ff273
Avoid memory crash when reading old VDMOS models.
...
Enable both old and current model format.
2023-12-30 22:52:41 +01:00
ace235da04
Remove ADMS from build process
2023-12-29 16:53:39 +01:00
f99a137eb3
Patch for snprintf provided by Marco Atzeri
2023-12-29 10:59:56 +01:00
902a62d2f4
win_time.c as extra distribution, used only by MSVC
2023-12-27 19:41:13 +01:00
f8e77d08d0
More headers distributed
2023-12-27 17:12:15 +01:00
f4c560ba71
Add more KLU headers to enable their distribution
2023-12-27 16:42:37 +01:00
a08f1046e4
Add KLU headers to enable their distribution
2023-12-27 16:18:36 +01:00
009249eafe
Short title
2023-12-27 12:27:31 +01:00
c1effe3b33
Just a hack to avoid a crash during sensitivity analysis:
...
Exclude parameter RCO from sens code, if not given,
as sens sets mods->BJTintCollResistGiven to TRUE, which fails due to
missing memory allocation for the extra nodes.
2023-12-27 12:26:56 +01:00
ca7c6cce71
Avoid crash, when sensitivity analysis is called
2023-12-27 11:32:31 +01:00
f307586d89
Formatting
2023-12-27 10:42:07 +01:00
db5e5b08eb
Don't switch display to "op", if called from a dc simulation.
2023-12-22 18:16:26 +01:00
03905433bb
If compatmode hs is set, don't run an extra iteration with
...
differing mode settings, but go directly to CKTop().
If other or none compat modes, keep existing behavior, as
for example CIDER example may otherwise slow down significantly.
This is to keep dc sim in accordance with other simulators.
2023-12-22 17:21:55 +01:00
37944bd7c4
Preliminary fix to bug 650
...
Don't omit replacement, when independent nested subcircuit has been checked.
FIXME: Better use the cards level parameter.
2023-12-22 17:18:43 +01:00
4671b588b6
Update comment
2023-12-22 17:14:43 +01:00
5154fd3fd7
Allways export function ngCM_Input_Path, independently from XSPICE
...
Update comment
2023-12-22 17:14:22 +01:00
d1abc8f6c7
typo
2023-12-22 13:11:21 +01:00
c53b32ffa8
Plug a potential memory leak
2023-12-19 15:30:44 +01:00
8f52a67786
Fix set but not used warning.
2023-12-19 14:28:29 +01:00
af31904f99
The previous fix for Bug #467 - ".OPTION INTERP has accuracy issue"
...
(359e3d46
2023-12-19 14:27:33 +01:00
ffcf3b24d9
Improve efficiency and irreversible CM support in EVTcall_hybrids() by
...
halting calls to code models as soon as the timestep is chenged.
This should have been included in 508fad0f55
2023-12-19 14:26:56 +01:00
9a50f8b749
typo
2023-12-12 17:24:23 +01:00
ce8f6c5017
prepare ngspice-42
2023-12-12 17:08:58 +01:00
2e56f3a063
Add short description of the new interface functions
...
ngSpice_LockRealloc(void) ad ngSpice_UnlockRealloc(void)
2023-12-12 17:02:19 +01:00
7f30055f22
Prevent crash if port number is less than 1.
2023-12-12 16:29:32 +01:00
45850c07dc
Don't silently accept wrong user input (missing nodes, values).
...
Check for at leat 4 tokens (name, n1, n2, val/model/...).
If the instance has not been set up correctly, bail out, prevent crash.
2023-12-12 16:29:28 +01:00
7cd4f003ff
typo
2023-12-12 16:29:23 +01:00
6459fed460
Don't prescribe a different resistance value if the user has given one > 0.
2023-12-12 16:28:38 +01:00
732c12c93f
Remove another potential crash if buggy user input
2023-12-09 15:43:19 +01:00
c69018fe82
Enable measurements with ?-sweep (v, i, temp, or res).
...
Improve error messages.
Prevent crash is compüdata is not available.
Add to examples for measure failures.
2023-12-09 15:43:15 +01:00
6ad0a6ad38
hisim2: allow compile w/o NEWCONV defined
2023-12-09 15:43:11 +01:00
a98cfcd8cb
allow compile w/o NEWCONV defined
2023-12-09 15:43:00 +01:00
3cf8fe8c41
Stop after last data point, preventing read overrun of nscale.
2023-12-01 12:26:58 +00:00
d82f948832
Fix a crash found by Brian Taylor: when .plot attempts to plot digital
...
node history, interpolation may produce an infinite value at digital edges.
Remove vertical edges when interpolating and make some other improvements:
do not calculate a polynomial approximation for unused frames;
center the target x-value in the frame; and do not propogate a reduction
in degree to later frames.
2023-11-30 17:23:32 +00:00
c18447f9f5
Add the support files for co-simulation with Verilog code
...
compiled by Verilator. Also add script files to Visual Studio builds
that are already installed by the Makefile builds.
2023-11-27 20:55:59 +00:00
a92c569b72
Prevent some strings being mis-recognised by strstr(), including
...
one that causes a false error message from the vlnggen script.
2023-11-27 17:17:21 +00:00
597268cc26
Treat input files names passed a start-up the same as those entered
...
as commands or called as scripts: search for them using $sourcepath.
2023-11-27 17:16:55 +00:00
07ce9c788e
Recognise *ng_script_with_params" in the first line of the first
...
program input file to mean that the file is a pure interpreter
script that receives any remaining command arguments.
In winmain.c ensure that the argv array is NULL-terminated
and tidy some code.
2023-11-27 17:06:39 +00:00
89851872ed
When substituting interpreter variables, allow '$' to be part of
...
the variable expresstion only within '[]' or '()'. That lets
forms like "$a$b" to be treated as two substitutions, not one.
2023-11-27 15:13:31 +00:00
3ba314d4bc
New interpreter commands strstr, strslice, fopen, fread and fclose.
2023-11-27 14:58:01 +00:00
566e2938f4
Add XSPICE code model d_cosim, a generic adaptor for digital cosimulation.
2023-11-27 14:50:21 +00:00
12fe7b90c4
Add new code model function cm_irreversible(). This may only be
...
called from an XSPICE code model's INIT call and has three effects:
the instance is treated as "hybrid" even when it does not use both
port types; its position in the hybrids array is adusted; and it
is explicitly notifed when called just befoore the end of an
analog time-step.
2023-11-26 18:30:53 +00:00
34e6c4abea
Convert XSPICE's hybrid_index array to instance pointers.
...
That simplifies code and will be needed for irreversible code model support.
2023-11-26 18:29:23 +00:00
508fad0f55
In dctran.c, call EVTcall_hybrids() (which then calls a subset of
...
code model instances) only when the current timestep was successful.
That is efficient and means that code models may rely on such calls,
for example a co-simulator may safely advance to the end of the timestep.
The function cm_irreversible() that is mentioned in a comment will be
added in a later commit.
2023-11-26 18:29:03 +00:00
3d1cbf93ee
Add a predifined variable 'skywaterpdk' to speed up circuit
...
loading and parsing.
If set, it removes quoting tokens for params. This requires
that Skywater PDK does adequately stick to the ngspice syntax
to put params in between braces. As far as tests go, it does.
It also set the number of nodes for MSO devices to 4, so no lengthy
search is required.
2023-11-23 18:29:48 +01:00
dd58b07949
Initialize the new mutex vecreallocMutex
2023-11-19 12:37:29 +01:00
1849a8d220
Add functions ngSpice_LockRealloc and ngSpice_UnlockRealloc
...
to lock reallocing output vectors, e.g. during reading the
vecs for plotting.
2023-11-19 12:05:18 +01:00
e87651e27f
Update to comments, restrict mutex definitions to shared ngspice
2023-11-19 12:05:10 +01:00
3619041e26
Add new lock for realloc of vectors
2023-11-19 12:05:01 +01:00
1db8eff25c
Write message only once.
2023-11-19 10:46:19 +01:00
ecf4f819dc
typo
2023-11-19 10:44:42 +01:00
86e991515e
Enable compiling with MINGW under MS Windows
2023-11-18 20:09:49 +01:00
4d4f226a83
Prevent crash, when vector is defined, but still empty.
2023-11-18 17:17:04 +01:00
e376c0e5c6
Eanble op or ac op (operating point), when selfheat is on.
...
op for tran has been o.k.
Fixme: preliminary fix or hack.
2023-11-18 17:16:19 +01:00
b62bb20e6f
Increase the allowable node name length from 24 to 256.
...
Enable safe copying, no user induced buffer overflow.
2023-11-18 10:55:19 +01:00
10756111bf
Fix a bug when deleting the memory. With the first call
...
to mem_delete() all the hash table is deleted, a second
call to mem_delete() does not have any further effect, so
has to be avoided.
2023-11-18 09:58:30 +01:00
e57979d15d
Plug two memory leaks introduced by
...
2bbadc608
2023-11-17 23:50:59 +01:00
70e366021b
Generate seed numbers from a microseconds clock, not a seconds clock
2023-11-17 18:35:21 +01:00
81bb886c71
Replace array global_nodes by hash table glonodes:
...
Save each global node only once
Search for global nodes hash table (much faster than scanning the list repeatedly).
Remove limit for amount of global nodes.
2023-11-17 17:02:06 +01:00
2bbadc6085
Use a hash table glonodes to prevent double or multiple entries
...
in global node table global_nodes
2023-11-17 13:58:57 +01:00
d060cb82af
typo
2023-11-17 13:57:39 +01:00
0735b8d0a5
fix previous commit on repeating error messages
2023-11-15 22:54:53 +01:00
22a10c0e44
typo
2023-11-15 22:54:06 +01:00
55ba927973
If nan occurs during op calculation, issue the warning
...
no more than 10 times.
2023-11-14 16:57:14 +01:00
4da3dc51fd
If compatmode ps or lt: add a series resistance (100µOhms) to
...
diodes, when RS is not given or 0:
Improves convergence in behavioural models for op evaluation.
2023-11-14 16:56:31 +01:00
29bfe94318
Exclude some code under a unified #undef REM_USED
2023-11-13 12:32:15 +01:00
2cf2693706
few code cleanings
2023-11-12 17:04:36 +01:00
2a005292db
Sparse 1.3 is the matrix solver if no option (sparse or klu) is given.
...
KLU is selected by 'option klu'
If both 'option klu' and 'option sparse' are given,
the last one executed determines the solver.
'option sparse=0' de-selects spares, i.e. selects klu.
'option klu=0' de-selects klu, selects sparse.
'option klu=1' has the same meaning as 'option klu'.
'option sparse=1' has the same meaning as 'option sparse'.
2023-11-12 16:32:40 +01:00
c87df54f24
Remove unused global variable cp_dol.
...
This also prevents a gcc 13 bug, as cp_dol has been set to '\0'
by -O2 optimization (see
https://stackoverflow.com/questions/77407156/s-0-being-optimized-out-possible-gcc-13-bug-or-some-undefined-behaviour )
2023-11-11 10:39:51 +01:00
359e3d4609
Fix Bug #467 - ".OPTION INTERP has accuracy issue".
2023-11-09 12:09:05 +00:00
10386ee3e3
Commit [35d338]ngspice partly reverted commit 423f9a9db to fix deletion
...
of source files if make was accidentally used in the source tree.
That caused the original bug to return. Fix the problem by deleting
the generated source files by name (no such files exist in source.
Also make the generated files depend on cmpp, making 'make clean'
unnecessary after a chenge to cmpp.
2023-11-09 12:08:02 +00:00
f6f7319792
Add null-pointer checks to some code that crashed when trying
...
to .print results from a non-existent analysis. Also remove the
troublesome .plot and .print lines from two examples.
2023-11-09 12:07:31 +00:00
4228ba6e8a
Ignore end-of-line comments in quoted strings.
2023-11-09 12:06:34 +00:00
0a087809d6
If both node names are the same, just print them once in the error message.
2023-11-08 13:12:06 +01:00
0555c5d9c7
Make previous KLU support check more transparent.
2023-11-08 11:49:28 +01:00
295f212de8
When CIDER is detected, until KLU works with CIDER, print Error: CIDER simulation is not (yet) supported with 'option klu'. Use 'option sparse' instead. and then call controlled exit(1).
2023-11-08 11:49:22 +01:00
35d338f256
partly revert commit 423f9a9db - don't remove xspice/icm .c files
2023-11-08 07:59:36 +01:00
d27b888f13
Noise simulation is buggy when using the KLU solver. Thus for now it is disabled.
...
Use 'option sparse' instead.
2023-11-06 15:03:09 +01:00
4e1452cdb7
rm compiler warnings
2023-11-04 19:36:31 +01:00
5223f4b27d
fix(hicuml2): ensure flicker noise power is always stored in state vec
2023-11-04 19:36:30 +01:00
c21f87051a
always compute osdi noise powers
...
ngspice will reuse operating points for noise analysis so we can not trust
the mode flags
2023-11-04 19:36:30 +01:00
f66e0bf2ac
implement osdi noise support
2023-11-04 19:36:30 +01:00
04c68d5f30
Cleanup child processes on Windows VisualC and Mingw. On Linux those processes quit when ngspice quits.
2023-10-28 19:45:24 +02:00
4219efb5d5
Make it explicit that null output ports are not allowed. The output port vector bounds are always >= 1.
2023-10-28 19:43:46 +02:00
c83d11c9c0
Call cm_cexit() to prevent the simulator running when d_process initialization errors occur.
2023-10-28 19:43:23 +02:00
21761207bc
Change license to 3-clause BSD (see
...
https://sourceforge.net/p/ngspice/ngspice/merge-requests/6/?limit=25#fd4f/73e6 )
2023-10-28 14:55:13 +02:00
09f070f582
Error handling improvements in cfunc.mod. Ensure that d_process.h wiil always respond to version and interface checks sent from sendheader. This is needed so that the pipe reads in sendheader do not cause Windows to hang when the interface version and in/out counts do not match. This hang was the cause of errors not being reported and the Windows gui hanging. Startup and header checks are now detected in cm_d_process, and the simulator will run but with runtime errors since a d_process model cannot be completely instantiated after initial errors. It would be good to find a means of gracefully halting the simulation run.
2023-10-28 11:00:33 +02:00
8c72a76844
Another attempt at clean up of error handling and reporting. It's OK on limux and cygwin, but Windows VisualC is being stubborn. I would prefer not to have to call exit(1) just for Windows, since then nothing is reported and the gui disappears in a puff of smoke. Even without the exit calls nothing gets reported with the Windows gui which will hang when there are errors detected by d_process.
2023-10-28 11:00:28 +02:00
4eae039779
Add modifications note.
2023-10-28 11:00:23 +02:00
4530cde8e2
Use Xspice cm_message_send to report errors rathen than printing to stderr and calling exit. When a d_process model has errors found in start(), sendheader(), and dprocess_exchangedata() these are reported, but if the model is run a SIGINT is raised. There must be a better way of stopping the simulator.
2023-10-28 11:00:18 +02:00
df28fabc42
Restore the deleted unused params to be backword compatible. Handle the case where the d_process instance has a null in vector, so that N_din is zero. This allows the model to be just a pattern generator. Add include to cmproto.h to avoid a forward ref. to an enum type.
2023-10-28 11:00:03 +02:00
307ba1985b
Remove unused reset_state param; do not allow null in and out, so there is at least 1 input and 1 output.
2023-10-28 10:59:52 +02:00
7820940be3
Remove the unused reset_delay param.
2023-10-28 10:59:42 +02:00
Holger Vogt
Brian Taylor
Giles Atkinson
dwarning
Pascal Kuthe
Pascal Kuthe