f7c038466b
The 8th parameter on a voltage or current source now is 'number of pulses'.
...
Previous usage had been PHASE, introduced by XSPICE, which has
been redundant to DELAY. PHASE is again available when compatibility flag
xs has been set.
2022-11-24 14:46:54 +01:00
d763b39ec3
Add a new compatibility mode xs (for XSPICE)
2022-11-24 14:43:16 +01:00
f2be3d681d
Allow resetting the limit for warning mesaages, when a new run is started.
2022-11-20 15:07:46 +01:00
8b85302da1
Replace obscure warning "singular matrix: check nodes mymode1 and mynode1" by
...
"singular matrix: check node mynode1", if both node names are equal.
2022-11-20 12:10:40 +01:00
2ec9e6a38e
Add more debug instrumentation.
2022-11-18 14:41:25 +01:00
b31b4759e6
Use tilde '~' inputs instead of creating inverters.
2022-11-18 14:41:08 +01:00
ef86fcd6bd
Remove mentioning line number 0, which has been incomprehensible.
2022-11-18 14:38:29 +01:00
8e5c76d8b3
Add error messages when controlled_exit is called:
...
No exit without message.
2022-11-16 11:37:35 +01:00
ffe920117c
calculate log frequency sweep such that start frequency and stop frequency are always exactly included
2022-11-14 11:34:49 +01:00
c4247c4353
fix: allow hicum/l2 to compile with older c++ compilers
2022-11-14 10:25:03 +01:00
743f20d04b
Add new functions for operators x**y or x^y
...
compatmode hs: x>0 pow(x, y), x<0 pow(x, round(y)), X=0 0
compatmode lt: x>0 pow(x, y), x<0 pow(x, y) if y is close to integer, else 0
2022-11-12 14:35:26 +01:00
eff183f51e
Add new functions for operators x**y or x^y
...
compatmode hs: x>0 pow(x, y), x<0 pow(x, round(y)), X=0 0
compatmode lt: x>0 pow(x, y), x<0 pow(x, y) if y is close to integer, else 0
2022-11-12 14:35:01 +01:00
b147aa0c3a
Add safety braces.
2022-11-11 14:13:36 +01:00
e770d96151
Tidy up debug tracing code.
2022-11-11 14:13:28 +01:00
cd72c7960b
Fix memory leaks.
2022-11-11 14:13:22 +01:00
b0e9874de8
Add more vectors to behavioral 283 circuit. Add tristate buffer circuit which shows glitches until inertial delays are implemented.
2022-11-11 14:13:03 +01:00
a922f797d3
When the gen_tab has only one entry, do not call optimize_gen_tab, it is not necessary.
2022-11-11 14:12:54 +01:00
574737b7b6
Check that the bparse gen_tab optimization loop finishes when no more improvements occur.
2022-11-11 14:12:47 +01:00
539176bf15
remove unused
2022-11-11 13:41:10 +01:00
d6650e66f0
To find the nearest integer, use nearbyint(). trunc() has delivered
...
only one-sided answers.
2022-11-11 13:21:21 +01:00
5adef0cf36
AlmostEqualUlps setting has been too strict: it failed in MINGW gcc.
...
3 --> 10
2022-11-11 11:50:53 +01:00
0d86539638
Trim trailing spaces
2022-11-09 15:11:13 +01:00
f9039ea238
Don't allocate memory for control array at every time step
...
Use loc instead, setting it up once during INIT
2022-11-09 15:09:52 +01:00
104afe77cb
Remove asserts, replace fixed size lexer_buf.
2022-11-07 14:47:57 +01:00
d05689eed8
Add pindly tristate example. Cleanup error handling.
2022-11-07 14:47:36 +01:00
f6386bda0c
Remove most asserts.
2022-11-07 14:47:29 +01:00
1200092250
Add behavioral (LOGICEXP, PINDLY) test for 283 circuit. There are glitches in the simulation for some of the s* outputs. Probably due to not having inertial delays. And why not set 'zero' delays as close to zero as permitted by XSPICE.
2022-11-07 14:47:18 +01:00
ab7634e72e
Reduce the delays of 'zero' delay gates to 1.0e-11. Add decoder test for logicexpr and pindly.
2022-11-07 14:47:13 +01:00
77d56eb184
Fix a typo, add more comments.
2022-11-07 14:47:02 +01:00
7e4b10a9db
Add support for TRISTATE: in PINDLY.
2022-11-07 14:46:53 +01:00
50e3c7eadd
Fix potential memory leak, clean out debug code.
2022-11-07 14:46:48 +01:00
3bdb6ee151
Better estimates of rise/fall delays in PINDLYs with outputs separated by CASE.
2022-11-07 14:46:34 +01:00
5717b2b2fc
Fix visualc compiler warnings.
2022-11-07 14:46:27 +01:00
629010b1cb
Improve delay estimates for pindly output buffers.
2022-11-07 14:46:14 +01:00
3eb0a089e5
Initial handling of PINDLY. Output buffers without rise/fall delay estimates.
2022-11-07 14:46:04 +01:00
9d239dc2f7
Move f_logicexp, f_pindly calls to u_process_instance. Use u_add_instance to copy gate instances and models to the replacement cards.
2022-11-07 14:45:57 +01:00
a27ae48e27
Fix potential memory leak.
2022-11-07 14:45:51 +01:00
67369f1c67
Initial logicexp parser and gate generator.
2022-11-07 14:45:45 +01:00
db81d7ca28
Add drive 0/1 for $d_lo/$d_hi.
2022-11-07 14:45:33 +01:00
2e064db79a
Add STATIC_VAR_TABLE locdata
...
Add CALLBACK cm_d_pwm_callback
Reserve memory for x, y arrays only once during INIT
2022-11-07 12:16:58 +01:00
9bab229e7b
We are developing towards ngspice-39
2022-11-06 11:31:21 +01:00
5bf6894d58
Add info on new function ngCM_Input_Path
2022-11-06 11:30:00 +01:00
159e36d23b
Add function
...
char* ngCM_Input_Path(const char* path);
to shared ngspice API
to send file path for code model input files (e.g. dsource).
Such path cannot be extracted automatically when netlist has
been sent by ngSpice_Circ
2022-10-26 23:34:10 +02:00
ce2e95f32d
Fix typo
2022-10-26 16:23:36 +02:00
39316ea3c6
Function ngSpice_Circ() may send empty lines to shared ngspice.
...
Skip these lines while processing the netlist array.
2022-10-26 16:23:00 +02:00
8bcea45f1c
Add a guard on parameter 'position', limit to
...
1e-9 to 0.999999999
FIXME: the given parameter limits from ifspec.ifs are not recognized.
2022-10-22 13:31:38 +02:00
4a222d74c1
Update on author
2022-10-22 13:29:48 +02:00
ec43c65f56
Patch required to allow compiling at Fedora with -Werror=format-security
...
Provided by Mamoru Tasaka
2022-10-21 15:26:20 +02:00
3864edb941
Typo
2022-10-19 12:25:00 +02:00
16b95ecda2
Small correction to previous commit.
2022-10-17 20:32:44 +02:00
Holger Vogt
Brian Taylor
Pascal Kuthe