ec6a902fb9
Fix a bug in simple diode, when ilimit is set, but not epsilon.
...
Make model more similar to LTSPICE
Add an example
2022-10-08 16:50:38 +02:00
7bb581b1b3
Remove parameter noiseless in simple diode model.
...
The model is noiseless anyway.
2022-10-08 16:50:26 +02:00
266d944745
Remove unnecessary hierarchical level check.
2022-10-08 16:50:15 +02:00
bd00738a49
Fix memory leaks in ff/latch code.
2022-10-08 16:50:03 +02:00
e2652d813d
If ps_udevice_msgs >= 2, print complete line of unsupported PSpice instance. For debugging purposes.
2022-10-08 16:49:38 +02:00
c704854b3c
Fix bug reported by Anant Devi in user discussion 22/9/22.
...
A function call, vi(v) was misparsed as the special token i(vsource)
for the current in a voltage source.
2022-10-08 16:49:02 +02:00
d9952575dd
Correct the digital state resolution table, that was previously asymmetric.
...
An equivalent change is mentioned in the SPICE OPUS change history.
2022-10-08 16:48:20 +02:00
372d9b2c87
Add bidirectional digital/analog bridge.
2022-10-08 16:48:11 +02:00
e80b724460
Add two functions to the Code Model Library: cm_get_node_name()
...
makes circuit node names available to diagnostics, while
cm_probe_node() is needed for a bidirectional A/D bridge.
2022-10-08 16:47:50 +02:00
8cc9d8522f
Fix bug #602 "Warning message trying to linearize a transient analysis vector"
...
by changing the way "ngspice -a" (autorun option) works. The inserted code
now checks whether a simulation has already run by examining $curplot
before forcing "run". Also at most one simulation is forced to run.
2022-10-08 16:47:30 +02:00
06131d8107
Rewrite code with Visual Studio complaints.
2022-10-08 16:47:09 +02:00
56d07aab31
Transfer i(xx) to xxx#branch only when i is the first
...
character of the token or preceeded by a space.
2022-10-08 16:46:51 +02:00
92ba8ac88e
Just to notify that this might need a better solution
2022-10-08 16:46:18 +02:00
f832380dc9
FIXME: This is a hack to re-enable 'make check'
...
Do not print warning if in batch mode.
2022-10-08 16:46:01 +02:00
98763c0add
Note: ix: dc value used for op instead of transient time=0 value
...
Former warning message or note only issued when dc value and
value at transient time=0 differ.
2022-10-08 16:45:38 +02:00
7483f6224d
Note: vs: dc value used for op instead of transient time=0 value
...
Former warning message or note only issued when dc value and
value at transient time=0 differ.
2022-10-08 16:45:14 +02:00
6037450952
Warning message, when 'run' is called without job
...
(tran, op, ac etc.) is defined.
2022-10-08 16:44:48 +02:00
3af627db44
Change error messages to warning messages, because simulator moves on
...
and command is ignored.
Make messages more verbose (which command?).
2022-10-08 16:44:30 +02:00
1bcbe8e6d8
Don't send error message to stdout, but to stderr.
2022-10-08 16:44:01 +02:00
519ce44227
safeguard against circuit not being abvailable,
...
avoid crash
2022-10-08 16:43:41 +02:00
4713cf0bf7
add parameter description
2022-10-08 16:43:16 +02:00
e703bd9142
Add comment about ps_udevice_msgs variable. Set to 1 will print PSpice instance names and types which are not supported and are found when processing a subckt.
2022-10-07 13:48:37 +02:00
e9855be595
If variable ps_port_directions >= 2, also show the translated Xspice statements.
2022-10-07 13:48:05 +02:00
1d026475a2
pwlts: a pwl v/i source with time input, smoothing and limiting functions
2022-10-07 13:39:16 +02:00
0754ea7657
Make the Error message a Warning message,
...
because ngspice may move on
2022-10-07 13:38:20 +02:00
0af4932c6f
Prevent a crash if (due to input error) the node_table is not available.
2022-10-07 13:37:57 +02:00
43c5ffaae8
Add special savecurrents options:
...
options savecurrents_bsim3, savecurrents_bsim4, and savecurrents_mos1
will save all device currents as listed in chapts 31.6.1, .8 and .9
of the ngspice manual. Pure savecurrents will yield a subset of MOS1
currents, as seen before.
2022-10-07 13:24:12 +02:00
e6772f4e4e
Prevent crash in gettok() and similar functions by checking for NULL
...
input. Return NULL instead.
2022-10-07 13:23:25 +02:00
2126230b64
Prevent crashes when nodes or tables are not available,
...
e.g. due to missing input file.
2022-10-07 13:22:59 +02:00
037293c81e
Improved error message: more info on the bad set form
2022-10-07 13:22:43 +02:00
a0357b3432
Remove search for "family" parameters on subcircuits in XSPICE
...
automatic bridging support as string-valued parameter support is
not yet intgrated.
2022-10-07 13:20:34 +02:00
4115064fd5
Latest auto-bridge code from development branch.
2022-10-07 13:20:17 +02:00
b1341c8e30
Insert XSPICE bridging devices automatically when an analogue node
...
has the same name as an XSPICE event node (including digital nodes).
The function Evtcheck_nodes() is replaced by a new version in its
own file.
2022-10-07 13:19:59 +02:00
07bb809158
Iterations for op or dc may start with arguments 0 for ln().
...
To cope with this, and potential overflow in exp function,
some limits have been added.
2022-10-07 13:19:22 +02:00
d39c60542d
Enable power measurement for W switch
2022-10-07 13:18:51 +02:00
79bb8edc90
Allow individual current measurements in switches or
...
linear dependent sources.
2022-10-07 13:18:15 +02:00
7e610c8487
.probe alli improved:
...
* Enable current mesurement for I source
* Look at only the first 2 nodes of S and W switches
and F and G controlled current sources, measure current
with = voltage source added to second node. So we get
I(Fx), I(Gx), I(Sx), and I(Wx).
2022-10-07 13:17:30 +02:00
04445e42ea
Make FROM/TO work in TRIG/TARG and WHEN variants of .meas/meas command.
...
Discussion at
https://sourceforge.net/p/ngspice/discussion/133842/thread/973e152274/
2022-10-07 13:16:28 +02:00
a1dd1f5563
Check for tran at first when linearize is called.
2022-10-07 13:16:03 +02:00
3ca91aa1ac
Make a trivial change to support (n)and3a, (n)or3a, (n)xor3a types. These are not used in any of the Micro Cap libraries. Completes support for Pspice tristate gate types.
2022-10-07 13:15:45 +02:00
abd4af1ae6
Ignore IO models in a subckt. Setting variable ps_port_directions to a non-zero int prints the directions (IN, OUT, INOUT) of subckt ports.
2022-10-07 13:14:58 +02:00
2d9f86c742
Check for name collisions between nodes generated during translation from Pspice to Xspice and instance pin or subckt port names. These are reported as ERRRORs.
2022-10-07 13:14:35 +02:00
c8ed9590b7
Handle the case when control voltages on and off are equal.
...
Update the linear switch: add the limits to resistance ron, roff
Update the log switch: correct the resistance calculation for
von < voff
Add some examples for the pswitch.
2022-10-07 13:12:56 +02:00
b94ef139dd
Avoid an endless loop: Safeguard function
...
search_plain_identifier(char *str, const char *identifier)
against identifiers being an empty string.
2022-10-07 13:12:30 +02:00
5b0b328186
If a node name to be plotted ends by ':power', its type is set to POWER.
...
Thus 'settype power nodename(s)' in the examples is no longer necessary.
2022-10-07 13:12:04 +02:00
fc0bf595f2
Update to .probe command:
...
If no .save or save command given by the user, add '.save all' internally.
To do so, check for .save or save.
Update to the .probe p command (power measurement)
Add probe_int_ to internal nodes and instance names, where appropriate.
These nodes will be disregarded when setting up the plot structure.
2022-10-07 13:11:42 +02:00
3da97fa277
Handle .if ... .else ... .endif before .csparam is executed,
...
thus allowing parameter entry to .control section being dependent
on .if
2022-10-07 13:10:31 +02:00
8038021369
Remove some dead code in the dec_bridge code model.
2022-10-07 13:09:36 +02:00
88d5e723ed
Fix double free in XSPICE CALLBACK functions as desribed here:
...
https://sourceforge.net/p/ngspice/mailman/message/37677362/
and add missing CALLBACKs in models that use STATIC_VARs with
pointer values.
2022-10-07 13:09:15 +02:00
10d3e1b754
Extend the output and partial derivatives of the output from the 2/3-D
...
table lookup models (XSPICE) continuously outside the defined
rectangle or cube, as it may help convergence and avoid ambiguity caused
by rounding at the boundaries. See bug #591 "Wrong 2D table model output".
The value is that of the nearest point in the region while the reported
derivative is ramped to zero outside the boundaries.
Also fixes incorrect output at the upper limit in each dimension.
2022-10-07 13:09:00 +02:00
Holger Vogt
Brian Taylor
Giles Atkinson