e9b5a9a957
aswitch needs two input nodes because gd has been selected for input.
2022-10-07 13:13:38 +02:00
c8ed9590b7
Handle the case when control voltages on and off are equal.
...
Update the linear switch: add the limits to resistance ron, roff
Update the log switch: correct the resistance calculation for
von < voff
Add some examples for the pswitch.
2022-10-07 13:12:56 +02:00
5b0b328186
If a node name to be plotted ends by ':power', its type is set to POWER.
...
Thus 'settype power nodename(s)' in the examples is no longer necessary.
2022-10-07 13:12:04 +02:00
2deefe1fbc
New tables for MOS devices
2022-10-07 13:11:18 +02:00
765d2e8a0e
Return data to input directory.
2022-10-07 13:10:51 +02:00
a69dd1bcde
Simplify the NMOS or PMOS selection by setting only one parameter
...
'mostype'
ngspice-37+ is required.
2022-10-07 13:10:06 +02:00
7f38ce4ebb
Remove debug code.
2022-10-07 12:55:42 +02:00
112e47d0d3
This test is equivalent to examples/xspice/xspice_c3.cir and uses Pspice subckts for the divider and nand gate.
2022-10-07 12:53:03 +02:00
e8dfd16cb2
Add counter test. Check for usage of $d_lo, $d_hi, $d_nc usage with dff, jkff, dltch which will not translate to Xspice.
2022-10-07 12:52:39 +02:00
f7c519f149
All-digital U* device examples. No a/d or d/a interfaces on the subcircuits.
2022-10-07 12:52:20 +02:00
c4efe2e3ac
Update, link on device models (public domain or TI)
...
Download adresses for TI models.
2022-05-15 18:36:35 +02:00
2e329986b8
Fix filename case.
2022-05-10 15:29:51 +02:00
ac8f8ad65d
New example: S-parameters of a Tschebyschef Low Pass filter
2022-05-09 10:07:48 +02:00
07feb637b5
New example for power measurement with .probe
2022-05-09 10:07:41 +02:00
129893b399
S-parameters: Replace S11 by S_1_1 etc. to avoid ambiguity
...
when more than 10 ports are measured.
Update to S-parameter script and command wr2sp
2022-04-29 07:29:14 +02:00
aca85ec386
Add .probe p(...) commands (including plotting and averaging)
2022-04-26 10:37:10 +02:00
cd451bd5b3
Add measuring power of the VDMOS devices with .probe p(device)
2022-04-26 10:36:39 +02:00
a0ee275b08
Improve printout formatting
2022-04-26 10:33:01 +02:00
6b03aaa15f
examples for loops.
...
The syntax is listed in the ngspice manual,
chapter 17.6 Control Structures. Practical examples
using a simple voltage divider circuit are given here.
2022-04-26 10:32:53 +02:00
9882c3a24c
New examples: command 'sp' and three-port example
2022-04-25 21:31:58 +02:00
5fb19c41bc
Fix internet address
2022-04-25 21:30:07 +02:00
a3d55cdddb
Replace (all) by alli
2022-04-25 21:29:55 +02:00
82822eb260
replace (all) by alli
2022-04-25 21:29:47 +02:00
18a01244af
save only relevant digital data (command 'esave'
2022-04-25 21:27:11 +02:00
7f326b4fe1
remove options not needed
...
local behavior setting
2022-04-25 21:26:57 +02:00
48e0164cc4
Replace $ in instance and.model lines by ;
...
$ is not a valid end-of-line comment delimiter when PS
compatibility mode is chosen.
2022-04-25 21:26:42 +02:00
c8beb1e601
Replace $ by ; as a universally valid end-of-line-comment delimiter
2022-04-25 21:26:35 +02:00
63a4e44c2c
Add more parameters to the example
2022-04-25 21:26:23 +02:00
f2ba4a93fb
Update example for independent grid and line widths
...
in polar or Smith plots.
2022-02-17 15:50:27 +01:00
36da24e251
Add another RF example, drawn from fig. 13.2 of
...
https://qucs-help.readthedocs.io/en/spice4qucs/RF.html
2022-02-17 15:50:05 +01:00
2c10c4aebd
S parameter simulation
...
Command '.sp'
arbitrary number of ports
ports made with modified VSRC
Patch provided by Alessio Cacciatori
https://sourceforge.net/p/ngspice/discussion/127605/thread/7a2655c86f/
2022-02-17 15:48:00 +01:00
afde37c35d
add y-axis label
2022-02-01 12:21:08 +01:00
a464ef47bc
meas example with output redirection
2022-01-15 16:03:19 +01:00
2981d0f56d
Use 'esave none' to reduce memory consumption.
...
Only analg nodes are to be saved.
2022-01-09 10:58:51 +01:00
738ac4863c
Obtain memory and simulation time
...
Add rusage information command
2022-01-03 22:11:15 +01:00
e373ca0e2f
tcl-testbench[x].sh: Use bash within shebang
...
These scripts using non Posix shell extensions which are provided by bash and
require the bash as shell to be fully functional.
2022-01-02 13:51:44 +01:00
8bf28b5aee
Comment out non-ngspice compatible commands
...
Otherwise error messages would have beeen generated
2021-12-16 08:12:29 +01:00
45ceeee509
small updates to example files
2021-12-13 21:50:10 +01:00
b714f0bea9
Add other integration methods to the example
...
We have: meas, integ, and code model INTEG
2021-12-13 21:50:00 +01:00
1605d293d0
Add function integ to control language
...
Trapezoidal rule for integrating a vector.
2021-12-13 21:49:45 +01:00
a68cfefb28
hcopywidth and hcopyheight failed with SVG plot
...
cp_getvar read CP_NUM, not CP_STRING
Patch #108 contributed by Giles Atkinson
Add hcopywidth and hcopyheight to example nmos_out_BSIM330_svg.sp
2021-12-13 21:49:01 +01:00
aaf586ae83
.probe: Add more safeguards to prevent crashes
...
in case of wrong user input
due to obtain empty lines in shared ngspice
2021-12-13 21:48:21 +01:00
d41379177f
.probe: various example netlists
2021-12-13 21:48:09 +01:00
f66573883f
Fix typo in the diode/README file.
2021-12-13 21:43:09 +01:00
a46b2041c2
Fix pz1.cir test so that the Cider OP data file is saved and the PZ analysis is run.
2021-12-13 21:42:53 +01:00
87b9df6681
CIDER: Examples for 2D plotting with gnuplot
2021-10-30 13:21:53 +02:00
69e2903bf6
Update to Garbage Collector for cpl
...
Update some comments
Insert the deleting functions
Reset pool_vi and ndn_btree
Add an example with 20 call to cpl in sequence
2021-10-30 10:44:29 +02:00
70e4d2157e
New names for the (experimental) ramp-time capacitor and inductor code models
2021-10-29 16:28:57 +02:00
eb7b1fc1e7
Some typos
2021-10-05 17:54:06 +02:00
34c227815d
RKM for C: Revert reading f, it is again femto
...
Examples files include expected results
2021-09-29 20:31:53 +02:00
Holger Vogt
Brian Taylor
Giles Atkinson
Alessio Cacciatori
Carsten Schoenert