583ee06232
Fix bug reported by Anant Devi in user discussion 22/9/22.
...
A function call, vi(v) was misparsed as the special token i(vsource)
for the current in a voltage source.
2022-09-23 13:15:07 +02:00
31fcd7d561
Correct the digital state resolution table, that was previously asymmetric.
...
An equivalent change is mentioned in the SPICE OPUS change history.
2022-09-23 13:15:07 +02:00
af09a06cdb
Add bidirectional digital/analog bridge.
2022-09-23 13:15:07 +02:00
118b997642
Add two functions to the Code Model Library: cm_get_node_name()
...
makes circuit node names available to diagnostics, while
cm_probe_node() is needed for a bidirectional A/D bridge.
2022-09-23 13:15:07 +02:00
9d780f8bb4
Fix bug #602 "Warning message trying to linearize a transient analysis vector"
...
by changing the way "ngspice -a" (autorun option) works. The inserted code
now checks whether a simulation has already run by examining $curplot
before forcing "run". Also at most one simulation is forced to run.
2022-09-23 13:15:07 +02:00
2f9403d143
Prevent overwriting of previous debug output when expanding auto-bridge deck.
2022-09-23 13:15:07 +02:00
8156745c97
Rewrite code with Visual Studio complaints.
2022-09-23 13:15:06 +02:00
2d4c1379af
Transfer i(xx) to xxx#branch only when i is the first
...
character of the token or preceeded by a space.
2022-09-23 12:58:47 +02:00
c7b0438ce7
Just to notify that this might need a better solution
2022-09-23 12:04:20 +02:00
41e92be956
FIXME: This is a hack to re-enable 'make check'
...
Do not print warning if in batch mode.
2022-09-21 10:04:22 +02:00
cfba8a5cd3
Note: ix: dc value used for op instead of transient time=0 value
...
Former warning message or note only issued when dc value and
value at transient time=0 differ.
2022-09-20 22:50:17 +02:00
bce48859df
Note: vs: dc value used for op instead of transient time=0 value
...
Former warning message or note only issued when dc value and
value at transient time=0 differ.
2022-09-20 22:47:24 +02:00
ba394d5903
Warning message, when 'run' is called without job
...
(tran, op, ac etc.) is defined.
2022-09-20 20:09:42 +02:00
6237639ec5
Change error messages to warning messages, because simulator moves on
...
and command is ignored.
Make messages more verbose (which command?).
2022-09-20 13:28:55 +02:00
64b429d6f8
Don't send error message to stdout, but to stderr.
2022-09-18 16:00:21 +02:00
453350bf2f
safeguard against circuit not being abvailable,
...
avoid crash
2022-09-18 11:11:56 +02:00
8dba70c7cc
add parameter description
2022-09-18 11:10:59 +02:00
78f732a8a1
Add comment about ps_udevice_msgs variable. Set to 1 will print PSpice instance names and types which are not supported and are found when processing a subckt.
2022-09-14 15:01:39 +02:00
3d625bc1ef
pwlts: a pwl v/i source with time input, smoothing and limiting functions
2022-09-09 15:24:37 +02:00
f5a172ce4e
Make the Error message a Warning message,
...
because ngspice may move on
2022-09-07 16:27:29 +02:00
8ef0c03fa6
Prevent a crash if (due to input error) the node_table is not available.
2022-09-04 17:35:47 +02:00
c7fa70d109
Add special savecurrents options:
...
options savecurrents_bsim3, savecurrents_bsim4, and savecurrents_mos1
will save all device currents as listed in chapts 31.6.1, .8 and .9
of the ngspice manual. Pure savecurrents will yield a subset of MOS1
currents, as seen before.
2022-09-02 15:06:40 +02:00
e9fcb9b332
Prevent crash in gettok() and similar functions by checking for NULL
...
input. Return NULL instead.
2022-09-01 16:57:54 +02:00
04ded78ef6
Prevent crashes when nodes or tables are not available,
...
e.g. due to missing input file.
2022-08-31 15:43:20 +02:00
bfab06e04b
Improved error message: more info on the bad set form
2022-08-31 15:42:30 +02:00
3901c0a865
Remove search for "family" parameters on subcircuits in XSPICE
...
automatic bridging support as string-valued parameter support is
not yet intgrated.
2022-08-31 15:34:09 +02:00
495172f532
Latest auto-bridge code from development branch.
2022-08-31 15:34:04 +02:00
148cecf919
Insert XSPICE bridging devices automatically when an analogue node
...
has the same name as an XSPICE event node (including digital nodes).
The function Evtcheck_nodes() is replaced by a new version in its
own file.
2022-08-31 15:33:59 +02:00
ff62468c1f
Iterations for op or dc may start with arguments 0 for ln().
...
To cope with this, and potential overflow in exp function,
some limits have been added.
2022-08-30 20:02:46 +02:00
0be7461dd9
Enable power measurement for W switch
2022-08-29 20:30:23 +02:00
b83a0d3fdf
Allow individual current measurements in switches or
...
linear dependent sources.
2022-08-29 14:12:43 +02:00
655a81da7a
.probe alli improved:
...
* Enable current mesurement for I source
* Look at only the first 2 nodes of S and W switches
and F and G controlled current sources, measure current
with = voltage source added to second node. So we get
I(Fx), I(Gx), I(Sx), and I(Wx).
2022-08-29 12:23:13 +02:00
682b849603
Make FROM/TO work in TRIG/TARG and WHEN variants of .meas/meas command.
...
Discussion at
https://sourceforge.net/p/ngspice/discussion/133842/thread/973e152274/
2022-08-17 15:30:56 +02:00
cc866ead29
Check for tran at first when linearize is called.
2022-08-17 15:14:06 +02:00
a361d63ca1
Make a trivial change to support (n)and3a, (n)or3a, (n)xor3a types. These are not used in any of the Micro Cap libraries. Completes support for Pspice tristate gate types.
2022-08-06 10:43:17 +02:00
f0876163e8
If variable ps_port_directions >= 2, also show the translated Xspice statements.
2022-08-06 10:43:02 +02:00
47753ad5b2
Ignore IO models in a subckt. Setting variable ps_port_directions to a non-zero int prints the directions (IN, OUT, INOUT) of subckt ports.
2022-08-06 10:42:50 +02:00
15d987ad0f
Check for name collisions between nodes generated during translation from Pspice to Xspice and instance pin or subckt port names. These are reported as ERRRORs.
2022-08-06 10:42:43 +02:00
3fc3997cef
Handle the case when control voltages on and off are equal.
...
Update the linear switch: add the limits to resistance ron, roff
Update the log switch: correct the resistance calculation for
von < voff
Add some examples for the pswitch.
2022-08-05 17:30:08 +02:00
874aca4a86
Avoid an endless loop: Safeguard function
...
search_plain_identifier(char *str, const char *identifier)
against identifiers being an empty string.
2022-08-01 18:30:50 +02:00
227bb9c419
If a node name to be plotted ends by ':power', its type is set to POWER.
...
Thus 'settype power nodename(s)' in the examples is no longer necessary.
2022-07-31 15:49:50 +02:00
382b6c534b
Update to .probe command:
...
If no .save or save command given by the user, add '.save all' internally.
To do so, check for .save or save.
Update to the .probe p command (power measurement)
Add probe_int_ to internal nodes and instance names, where appropriate.
These nodes will be disregarded when setting up the plot structure.
2022-07-31 15:47:32 +02:00
0b3383546c
Handle .if ... .else ... .endif before .csparam is executed,
...
thus allowing parameter entry to .control section being dependent
on .if
2022-07-24 15:54:29 +02:00
f878878bd8
Remove some dead code in the dec_bridge code model.
2022-07-24 12:23:24 +02:00
659b426cf8
Fix double free in XSPICE CALLBACK functions as desribed here:
...
https://sourceforge.net/p/ngspice/mailman/message/37677362/
and add missing CALLBACKs in models that use STATIC_VARs with
pointer values.
2022-07-24 12:23:19 +02:00
2406846a21
Extend the output and partial derivatives of the output from the 2/3-D
...
table lookup models (XSPICE) continuously outside the defined
rectangle or cube, as it may help convergence and avoid ambiguity caused
by rounding at the boundaries. See bug #591 "Wrong 2D table model output".
The value is that of the nearest point in the region while the reported
derivative is ramped to zero outside the boundaries.
Also fixes incorrect output at the upper limit in each dimension.
2022-07-24 12:23:15 +02:00
ec725c3814
Fix memory leak by moving the state transition table to a STATIC_VAR
...
whose memory can be recovered by a call back. Also make cfunc.mod
less ugly.
2022-07-24 12:23:05 +02:00
44930ebcb1
Function guess_type may yield the wrong type, because
...
it does not cover all of the the many, many options possible.
This commit fixes bug597, where [current] was interpreted as
capacitance.
2022-07-24 12:17:29 +02:00
eee07be10d
Improve (a little) the plotting of digital data with plot option digiplot:
...
Repair scaling on MS Windows:
Suppress y axis lettering and unit:
Allow or dis-allow grid.
2022-07-20 15:11:51 +02:00
758ecd1d60
tabs to spaces
2022-07-18 23:29:59 +02:00
Giles Atkinson
Holger Vogt
Brian Taylor