14bf034f28
The lexer incorrectly treats a single '_' '-' '/' as an identifier. The counter used for tmp__ names should be incremented after use. The infix_to_postfix converter now has more checks for invalid infix expressions in LOGICEXP constructs. Without these checks the evaluation of the generated postfix could silently create bad gates which would load but simulate incorrectly. All MicroCap and PSpice libraries and QEI.cir pass their tests.
2024-03-11 22:25:48 +01:00
ae8e423d97
Add WARNINGs when there are potential name collisions, and identify the possible name.
2024-03-11 22:25:39 +01:00
adb38ecb17
Upon error, bail out when strict_error is set.
2024-03-10 21:58:56 +01:00
2dab26212a
introduce diode breakdown voltage parameter alias vb
2024-03-10 09:47:17 +01:00
f5c0a1420c
Upon a warning on a model issue, ngspice should not bail out,
...
even if strict_error is set, as typically the simulation will
run and foreign models often have additional unsupported, but
less important parameters.
It shall however, exit if the simulation is interrupted due
to an error and strict_errorhandling is set.
2024-03-09 23:41:34 +01:00
da51e1bddf
Don't use printf(".."), but fprintf(stdout, "..."),
...
thus send an end-of-line also when redirected to file.
2024-02-28 10:06:31 +01:00
a5f99a4953
Make PSP103_nqs standard, as it is used by the Open PDK from IHP
2024-02-23 14:12:49 +01:00
4c983e9133
Remove old dead code.
2024-02-23 14:06:39 +01:00
8788ce3504
Add check for a trailing } in a logicexp statement.
2024-02-23 14:06:28 +01:00
826401f6a4
Add error detection and reporting for invalid infix expressions.
2024-02-23 14:06:17 +01:00
adaa3d39fc
no use for grouping in cx_fft and cx_ifft
2024-02-16 13:56:43 +01:00
3201bcb09b
prevent clang error
2024-02-16 10:12:09 +01:00
fd000c079b
hicum2: use device temperature for noise analysis too
2024-02-15 18:19:11 +01:00
3a18028283
vbic: use device temperature for noise analysis too
2024-02-15 18:09:38 +01:00
305cd85c76
mos1...3: use device temperature for noise analysis too
2024-02-15 07:49:06 +01:00
a1dbd3f3c8
bjt, dio, jfet, res: use device temperature for noise analysis too
2024-02-14 18:16:50 +01:00
20c82a5b1b
format
2024-02-14 17:50:41 +01:00
e8f1cd4c92
too soon return - break is correct
2024-02-14 14:17:01 +01:00
8d64381795
rm confusing comments and formatting
2024-02-14 14:14:15 +01:00
b9c1f68ee0
Preliminary fix to bug report 660
...
Final setting will be decided before next release.
2024-02-13 14:04:58 +01:00
e01290c9a2
Replace the logicexp parser with infix to postfix translation followed by evaluating the postfix. logicexp.c is now shorter and easier to understand and maintain. Also, operator precedence expression parsing conforms to the PSPICE rules. Thus, a & b | c is understood to mean (a & b) | c, for example.
2024-02-13 10:11:28 +01:00
bd0f725776
There are approx. 47 out of 1455 subckts in PSPICE 9.1 libraries which contain X* subckt calls together with zero or more U* instances. Now this type of subckt can be translated to XSPICE.
2024-02-13 10:11:21 +01:00
9ed7a24a0e
mos1...3: Beta in noise w/o channel length modulation
2024-02-12 18:44:35 +01:00
6359b7b41f
mos1...3: add nlev=3 mode channel thermal noise
2024-02-12 18:44:35 +01:00
c2f0b1468c
mos3mask: change unusual structure name
2024-02-12 18:44:35 +01:00
89c7b83954
mos1...3: formatting and white spaces
2024-02-12 18:44:35 +01:00
1381d71cb1
selectable flicker noise models for mos1...3
2024-02-12 18:44:35 +01:00
2a6db71726
formatting mos1...3 noise code
2024-02-12 18:44:35 +01:00
1c9f8b6345
two corrections in Ycor and NF formulae
2024-02-12 11:08:35 +01:00
2ec5944dd4
Use all available precision when creating a "plot" command for a
...
zoomed window. That prevents an unexpected zoom-out in one dimension
caused by a zero-height (or width) window being requested when zooming
with already high magnification.
2024-02-07 14:56:59 +01:00
7d1ea80a2e
F source fails when VNAM contains math symbols like '-'.
...
Use INPgetNetTok for instance parameters
like it has been done for nodes already.
2024-02-02 11:15:14 +01:00
c0b3511b20
compile with gcc-14 fails due to `-Werror=incompatible-pointer-types`
...
Patch provided by Mamoru Tasaka.
2024-02-02 11:12:24 +01:00
1e8f9a411a
rm obsolete order for spec blackman window
2024-01-26 08:32:18 +01:00
e0c3206601
partially revert commit aafd7bbb: spec triangular window
2024-01-26 07:45:27 +01:00
8aa20cfc98
fft window functions back to correct scaling - no need need for post scaling step
2024-01-24 23:16:44 +01:00
9e41383dd9
window weightings between 0 and 1 for fft vector function and command
2024-01-22 17:37:27 +01:00
aafd7bbb42
correct bartlett/triangle fft window formulae
2024-01-21 21:58:43 +01:00
a70297e87a
Several PSPICE 9.1 evaluation digital libraries contain timing .model statements at the global level for subckts with U* instances that reference those models. By specifying "set ps_global_tmodels=1" in .spiceinit an extra pass inside u_instances() will collect those global timing models for use in subckts. Report errors detected when ngspice parses a LOGICEXP but has not added support for operator precendence. Include a hint of how to fix those errors by inserting parentheses. This error only occurs in 10 of 585 cases in the libraries. Note that inpcompat.c has been saved as a unix filetype.
2024-01-17 14:15:07 +01:00
add31fd410
correct flicker noise term for mos1 and mos2 - bug #656
2024-01-16 16:26:38 +01:00
a0bddf872d
Fix dd7b9ff27
...
("Avoid memory crash when reading old VDMOS models.
Enable both old and current model format.",
2023-12-30)
2024-01-15 11:10:50 +01:00
79e80dbbab
Automatically adding diode RS only when variable 'rsdiode' is set
...
to a positive resistance value.
2024-01-15 09:59:21 +01:00
0141473aa4
Don't derefence Matrix->SMPkluMatrix->KLUmatrixCommon if it is NULL.
...
Test for NULL moved upwards in front of dereferencing.
2024-01-14 15:12:03 +01:00
5266a7c4bc
If there is a successful step, but the goal is not yet reached,
...
don't start with the minimum value of 1.00005, as this may last
forever. Restart with 3.
2024-01-14 11:16:45 +01:00
d86a0c77cb
Improve scheduling of breakpoints for V-source (PULSE and PWL).
...
This fixes bugs with the TRA delay line reported by Tom Hajjar in
the Help forum, Jan 11 2024.
2024-01-13 18:06:46 +00:00
2ad97feb31
A quick fix for a bug reported in the Help forum by Tom Hajjar on
...
Jan 6 2024. Prevent the TRA device from requesting a breakpoint
in the past, as that is a hard error.
2024-01-12 17:14:05 +00:00
e6d6f8e928
Update to V/I sources, SFFM and AM
...
Enable more AM functions.
Unify the settings of both sources.
2024-01-08 13:21:43 +01:00
5dbb25f667
Set new default values.
...
Restructure the code a bit.
Two parameters for AM are required (offset and amplitude). Even if this
sounds needless, changing it would require a major effort.
2024-01-07 11:59:33 +01:00
4d0e65b3b6
Extend the error message
2024-01-07 11:56:56 +01:00
a4ae81ec06
We are developing towards ngspice-43
2024-01-06 23:14:26 +01:00
aaaad70991
Previous AM was buggy in V(I)SRC: Update to amplitude modulation
...
with corrected equation.
2024-01-06 23:09:27 +01:00
88d0727d3f
In PS compat mode we only have 2 nodes in a diode,
...
but still allow self heating diode with ngspice syntax.
2024-01-06 11:51:11 +01:00
ace932e1b9
Patches provided by Carsten Schoenert: Misspellings, File access
2023-12-31 13:51:05 +01:00
88844ba74d
Prevent vectors carrying the E POLY source current from being disaggregated
2023-12-31 13:32:45 +01:00
dd7b9ff273
Avoid memory crash when reading old VDMOS models.
...
Enable both old and current model format.
2023-12-30 22:52:41 +01:00
ace235da04
Remove ADMS from build process
2023-12-29 16:53:39 +01:00
f99a137eb3
Patch for snprintf provided by Marco Atzeri
2023-12-29 10:59:56 +01:00
902a62d2f4
win_time.c as extra distribution, used only by MSVC
2023-12-27 19:41:13 +01:00
f8e77d08d0
More headers distributed
2023-12-27 17:12:15 +01:00
f4c560ba71
Add more KLU headers to enable their distribution
2023-12-27 16:42:37 +01:00
a08f1046e4
Add KLU headers to enable their distribution
2023-12-27 16:18:36 +01:00
009249eafe
Short title
2023-12-27 12:27:31 +01:00
c1effe3b33
Just a hack to avoid a crash during sensitivity analysis:
...
Exclude parameter RCO from sens code, if not given,
as sens sets mods->BJTintCollResistGiven to TRUE, which fails due to
missing memory allocation for the extra nodes.
2023-12-27 12:26:56 +01:00
ca7c6cce71
Avoid crash, when sensitivity analysis is called
2023-12-27 11:32:31 +01:00
f307586d89
Formatting
2023-12-27 10:42:07 +01:00
db5e5b08eb
Don't switch display to "op", if called from a dc simulation.
2023-12-22 18:16:26 +01:00
03905433bb
If compatmode hs is set, don't run an extra iteration with
...
differing mode settings, but go directly to CKTop().
If other or none compat modes, keep existing behavior, as
for example CIDER example may otherwise slow down significantly.
This is to keep dc sim in accordance with other simulators.
2023-12-22 17:21:55 +01:00
37944bd7c4
Preliminary fix to bug 650
...
Don't omit replacement, when independent nested subcircuit has been checked.
FIXME: Better use the cards level parameter.
2023-12-22 17:18:43 +01:00
4671b588b6
Update comment
2023-12-22 17:14:43 +01:00
5154fd3fd7
Allways export function ngCM_Input_Path, independently from XSPICE
...
Update comment
2023-12-22 17:14:22 +01:00
d1abc8f6c7
typo
2023-12-22 13:11:21 +01:00
c53b32ffa8
Plug a potential memory leak
2023-12-19 15:30:44 +01:00
8f52a67786
Fix set but not used warning.
2023-12-19 14:28:29 +01:00
af31904f99
The previous fix for Bug #467 - ".OPTION INTERP has accuracy issue"
...
(359e3d46
2023-12-19 14:27:33 +01:00
ffcf3b24d9
Improve efficiency and irreversible CM support in EVTcall_hybrids() by
...
halting calls to code models as soon as the timestep is chenged.
This should have been included in 508fad0f55
2023-12-19 14:26:56 +01:00
9a50f8b749
typo
2023-12-12 17:24:23 +01:00
ce8f6c5017
prepare ngspice-42
2023-12-12 17:08:58 +01:00
2e56f3a063
Add short description of the new interface functions
...
ngSpice_LockRealloc(void) ad ngSpice_UnlockRealloc(void)
2023-12-12 17:02:19 +01:00
7f30055f22
Prevent crash if port number is less than 1.
2023-12-12 16:29:32 +01:00
45850c07dc
Don't silently accept wrong user input (missing nodes, values).
...
Check for at leat 4 tokens (name, n1, n2, val/model/...).
If the instance has not been set up correctly, bail out, prevent crash.
2023-12-12 16:29:28 +01:00
7cd4f003ff
typo
2023-12-12 16:29:23 +01:00
6459fed460
Don't prescribe a different resistance value if the user has given one > 0.
2023-12-12 16:28:38 +01:00
732c12c93f
Remove another potential crash if buggy user input
2023-12-09 15:43:19 +01:00
c69018fe82
Enable measurements with ?-sweep (v, i, temp, or res).
...
Improve error messages.
Prevent crash is compüdata is not available.
Add to examples for measure failures.
2023-12-09 15:43:15 +01:00
6ad0a6ad38
hisim2: allow compile w/o NEWCONV defined
2023-12-09 15:43:11 +01:00
a98cfcd8cb
allow compile w/o NEWCONV defined
2023-12-09 15:43:00 +01:00
3cf8fe8c41
Stop after last data point, preventing read overrun of nscale.
2023-12-01 12:26:58 +00:00
d82f948832
Fix a crash found by Brian Taylor: when .plot attempts to plot digital
...
node history, interpolation may produce an infinite value at digital edges.
Remove vertical edges when interpolating and make some other improvements:
do not calculate a polynomial approximation for unused frames;
center the target x-value in the frame; and do not propogate a reduction
in degree to later frames.
2023-11-30 17:23:32 +00:00
c18447f9f5
Add the support files for co-simulation with Verilog code
...
compiled by Verilator. Also add script files to Visual Studio builds
that are already installed by the Makefile builds.
2023-11-27 20:55:59 +00:00
a92c569b72
Prevent some strings being mis-recognised by strstr(), including
...
one that causes a false error message from the vlnggen script.
2023-11-27 17:17:21 +00:00
597268cc26
Treat input files names passed a start-up the same as those entered
...
as commands or called as scripts: search for them using $sourcepath.
2023-11-27 17:16:55 +00:00
07ce9c788e
Recognise *ng_script_with_params" in the first line of the first
...
program input file to mean that the file is a pure interpreter
script that receives any remaining command arguments.
In winmain.c ensure that the argv array is NULL-terminated
and tidy some code.
2023-11-27 17:06:39 +00:00
89851872ed
When substituting interpreter variables, allow '$' to be part of
...
the variable expresstion only within '[]' or '()'. That lets
forms like "$a$b" to be treated as two substitutions, not one.
2023-11-27 15:13:31 +00:00
3ba314d4bc
New interpreter commands strstr, strslice, fopen, fread and fclose.
2023-11-27 14:58:01 +00:00
566e2938f4
Add XSPICE code model d_cosim, a generic adaptor for digital cosimulation.
2023-11-27 14:50:21 +00:00
12fe7b90c4
Add new code model function cm_irreversible(). This may only be
...
called from an XSPICE code model's INIT call and has three effects:
the instance is treated as "hybrid" even when it does not use both
port types; its position in the hybrids array is adusted; and it
is explicitly notifed when called just befoore the end of an
analog time-step.
2023-11-26 18:30:53 +00:00
34e6c4abea
Convert XSPICE's hybrid_index array to instance pointers.
...
That simplifies code and will be needed for irreversible code model support.
2023-11-26 18:29:23 +00:00
508fad0f55
In dctran.c, call EVTcall_hybrids() (which then calls a subset of
...
code model instances) only when the current timestep was successful.
That is efficient and means that code models may rely on such calls,
for example a co-simulator may safely advance to the end of the timestep.
The function cm_irreversible() that is mentioned in a comment will be
added in a later commit.
2023-11-26 18:29:03 +00:00
3d1cbf93ee
Add a predifined variable 'skywaterpdk' to speed up circuit
...
loading and parsing.
If set, it removes quoting tokens for params. This requires
that Skywater PDK does adequately stick to the ngspice syntax
to put params in between braces. As far as tests go, it does.
It also set the number of nodes for MSO devices to 4, so no lengthy
search is required.
2023-11-23 18:29:48 +01:00
dd58b07949
Initialize the new mutex vecreallocMutex
2023-11-19 12:37:29 +01:00
1849a8d220
Add functions ngSpice_LockRealloc and ngSpice_UnlockRealloc
...
to lock reallocing output vectors, e.g. during reading the
vecs for plotting.
2023-11-19 12:05:18 +01:00
Brian Taylor
Holger Vogt
dwarning
Giles Atkinson