3fa09bd3cf
Add missing header files to enable their distribution
2024-12-27 16:20:08 +01:00
6dec8f4d14
Update of the installation on macOS with M1 - 4 CPUs
2024-12-27 14:19:09 +01:00
a4e443fcce
precautionary prevent passing instances which internally have got
...
upper case lettering. Removes a crash reported in
https://gitlab.com/kicad/code/kicad/-/issues/18648 .
2024-12-27 11:18:00 +01:00
ffde17441b
Don't quote the subcircuit name in an X line
2024-12-27 11:15:09 +01:00
d549b882df
Fix a crash that happens after an iplot window is zoomed and closed
...
while active.
2024-12-27 11:14:53 +01:00
8eea1f0b41
Prepare ngspice-44
2024-12-26 15:01:10 +01:00
9ce056304c
Prepare ngspice-44
2024-12-26 14:50:33 +01:00
45f1d27e3d
Remove obsolete content not directly linked to ngspice.
2024-12-24 10:13:06 +01:00
00318df064
no readline required for shared ngspice
2024-12-23 17:46:52 +01:00
a2ba997651
Update, prepare for ngspice-44
2024-12-23 17:32:11 +01:00
20e889b736
Fix a typo
2024-12-23 16:54:34 +01:00
a841a66ee1
d_process needs to strip || at the end of the process_file string when using PSpice compat mode. The failure was found by @slh on the KiCad forum.
2024-12-15 22:12:17 +01:00
1e4a6ac8b8
avoid memory leak by appending, not prepending the word
2024-12-15 10:29:32 +01:00
a6ad2470f1
Add a flag compmod to struct card.
...
Set compmod to 1 if netlist line is included by command 'incpslt'
Guard special newcompat.hs sections by compmod
2024-12-15 10:29:23 +01:00
3f562ae4f6
fix diode level=3 setup for multiple simulations
2024-12-15 10:29:05 +01:00
4bd5ebe3e3
Fixed the diode scaling bug reported by A. Buermen
2024-12-15 10:28:46 +01:00
727f11edf0
Fixed incorrect OSDItrunc() state index when $limit is present.
2024-12-15 10:28:33 +01:00
bf6ed080cf
Verilog-A $simparam("tnom") is in degrees Celsius.
...
Adjusted OSDI interfaces to reflect that.
2024-12-15 10:28:19 +01:00
778b730393
Exposed more $simparams via OSDI.
...
initializeLimiting, epsmin, reltol, vntol, abstol
2024-12-15 10:28:06 +01:00
cb084bcba3
more tests/warnings during compile step
2024-12-15 10:27:41 +01:00
72d70e3471
bool definition is in stdbool.h, no local definition required
2024-12-15 10:27:29 +01:00
f9b7455d10
Proper conversion bool to int
2024-12-15 10:27:14 +01:00
c05a6398b7
Reserve enough memory
2024-12-15 10:27:04 +01:00
3f26d455c3
Re-formatting for readability
2024-12-15 10:26:51 +01:00
33638fc46e
Improve error messages
2024-12-15 10:26:42 +01:00
3ca51e47b2
Unify to type bool
2024-12-15 10:26:29 +01:00
8b5a046cdb
Remove again, not needed
2024-12-15 10:26:20 +01:00
8e9a115aa9
Update/remove comment(no longer valid)
2024-12-15 10:26:08 +01:00
b7092ff19b
Revert ABORTPROC to bool, where appropriate
2024-12-15 10:25:51 +01:00
deb3cd9809
Replace all BOOLEAN, BOOL, _Bool by bool
...
Remove all #undef bool (set in conjunction with #iclude <Windows.h>)
2024-12-15 10:25:28 +01:00
cef9d5b11c
iscas_stdcell.lib need geometry parameters, but is not used anyway, so commented out
2024-12-15 10:25:07 +01:00
932ef50cc3
Improve two error messages: in d_cosim, report the filename given,
...
not the last one tried; and report attempted use of iplot or
tclplot in batch mode only once.
2024-12-06 22:50:37 +01:00
721aab9624
Fix a bug reported by Tom Hajjar with title "XSPICE d_osc usage" in
...
Help, 2024/12/5. Also correct the timing of the request for the next
call and modify a constant to make the method more robust. To support
the main change, cm_analog_set_temp_bkpt() now reports when a breakpoint
request is ignored, and T(x) values are set before an EVENT call.
2024-12-06 22:50:25 +01:00
68228ca33f
Improve comments
2024-12-06 22:49:55 +01:00
660b183ad0
Revise check for '.probe alli' and event nodes:
...
Bail out, don't run any sim, don't change variable
'auto_bridge'.
2024-12-06 22:49:40 +01:00
54865ed39d
bring the KLU_malloc() in right order, ticket #717
2024-12-06 22:48:56 +01:00
4eec6eb8e2
Fixes bug 723
...
New lines had been inadvertently written into the .control section.
2024-12-06 22:48:44 +01:00
fdbb62844c
Example for sending a text string over the subcircuit boundary.
2024-12-06 22:48:31 +01:00
2db9533380
Enable strings as parameters across subckt boundaries
...
by keeping the quotes and excluding {} around the string token.
2024-12-06 22:48:15 +01:00
07994ff225
VDMOS: concatenate inner node name
2024-12-06 22:45:48 +01:00
6500caeba1
Now that checks on actuals and formals have been fixed for X* instances, some older PSpice libraries will not translate correctly in psa mode. This commit removes unnecessary power and ground nodes from X* instances of subcircuits where the nodes are optional. These X* instances occur within the body of another subcircuit which is being translated. MicroCap libraries that we can translate in ngspice do not have such cases. To enable the removal of the power and ground nodes, set ps_global_tmodels=1 in .spiceinit. This is not set by default since an extra pass through the circuit word list is necessary to find the subcircuits whose instances do not require power and ground node removal. Without enabling this feature, errors reporting too many parameters may be reported.
2024-12-06 22:45:13 +01:00
5980869040
Apply Patch #119 -
...
"Fix buffer overflow in src/xspice/icm/digital/d_state/cfunc.mod".
The change is not identical to the supplied patch. It was slightly
modified to make the original code more sane.
Found and patched by Artem Sinkevich.
2024-12-06 22:44:36 +01:00
abc3fceb7e
Enhance sensitivity analysis with an option to choose the parameters
...
to be varied. Shell-style wildcards ("*?") are supported.
2024-12-06 22:44:06 +01:00
c30bc423ba
Initial fix for Bug 710 -
...
"The log file appears blank when a VDMOS element is added".
The problen was caused by a crash during sensitivity analysis
caused by selecting parameters for wariation based on their
values. That is not repeatable between passes. The fix is to
remove that code, but it causes many more parameters to be used.
2024-12-06 22:43:53 +01:00
7d59ad2db7
Create extra name derived from node name, but with / replaced by _,
...
to become part of the new voltage source name: avoid names
which are not parsed correctly by the B source equation parser.
2024-12-06 22:43:26 +01:00
a45c1500a6
Remove 512 char limit of sourcepath variable.
...
Make attaching new path more efficient.
2024-12-06 22:43:00 +01:00
3d7dbc0124
Update to
...
a43c6f491
2024-12-06 22:42:35 +01:00
22b4f4e632
Re-enable detection of over- or underflow of number of nodes
...
when calling a subcircuit.
Update to commit
c12296182
2024-12-06 22:42:16 +01:00
33ef1fc876
typos
2024-12-06 22:41:43 +01:00
c79b3501ef
Add note on compatibility mode psa
2024-12-06 22:41:31 +01:00
Holger
Giles Atkinson
Brian Taylor
dwarning
dwarning
Árpád Bűrmen
Brian Taylor