routine does not have an exact equivalent in PrematchLists() and
needs to be run beforehand. This fix keeps FlattenUnmatched()
from being run on all cells at the beginning and restricts it
to being run on the contents of individual cells during matching,
after checking if either of the cells is a black-box. Avoiding
flattening contents of one side when the other is a black-box
(or simply doesn't contain any subcircuits or devices) prevents
unnecessary flattening of cells that will never get compared.
for each connection in the dump of incorrect nets. This is
definitely critical to finding local swapping errors, and needs
to be incorporated into the non-debug mode, preferably as part of
the JSON file dump. But that's for later.
contents (previously wasn't done), and also added sorting for items with
non-matching names which have only one item in the group for each circuit
(so they must be matching in some sense). This makes the output a bit
more readable without re-enabling the compute-intensive sorting method
for non-matching entries.
This fixes crash on macos due to wrong hash() being linked in.
It also makes sure that proper function defs are declared and available
(as required by C99) to make compile possible in newer compilers (e.g.
Apple clang) and to some extend prevent similar linkage issues happening
again.
Changed line breaks in log and stdout to better differentiate subcircuits.
Added merged series device counts and differentiated from parallel merged device counts.
Added file number to disconnected net, merged count messages.
Changed black box errors to show file numbers instead of hard coded values.
Final error cell list changed from all on one line to one per line.
Removed redundant display in black box warning.
information for a non-matching pin in circuit1 and generates a
proxy pin in circuit2---there is some case where this is redundant,
I think, but I need to find the example.
continues to allow missing pins to match unconnected pins, but
*only* on subcircuits below the top level. This essentially forces
layouts to separate merged pins with metal resistors, although
there should be an option in magic's ext2spice routine that allows
"equiv" statements, when declaring equivalence of two ports, to be
replaced by a zero volt source or zero ohm ideal resistor.
pins on non-black-boxed circuits as it does not black-boxed circuits,
but specifically looking for pins that are disconnected on both sides,
since those do not appear in the node list and are not otherwise
handled. Otherwise, disconnected pins will appear to have disappeared
from the first netlist.
a final parallel or series combination needs to be done but there
are still multiple property records. The multiplier was being
incorrectly applied twice, causing an automatic mismatch in
parameter values.
of multiple devices during flattening, that will skip over a node
record at the end of a subcircuit call being flattened and therefore
remove it from the netlist.
list that it prints in the side-by-side element mismatch comparison
for an element, when there is no node record associated with the pin
connection. This makes the output clearer.
swapped, so that if pin names are swapped on the top level, netgen will
report this as a final error message. Otherwise, the mismatch is only
reported back in the pin list where it is not obvious.
add properties across multiple property records in the last matching
step, if there are still multiple properties and the values can be
combined. Previously, netgen had been assuming that there would only
be one property record left at this point, which is not true. This
shows up particularly for BSIM fingered devices, since "nf" is
ignored.
for file extensions is greedy and picks the first matching extension
starting at the front of the string, such that, e.g., "file.ext.spice"
is interpreted as a ".ext" file and not a ".spice" file.
run to the end of the list of circuit elements. Also corrected
another issue caused by the flag to denote multiple no-connect pins,
which can be on an instance pin and so cannot share the data from the
instance record.
device with one or more no-connect pins. The flag that indicates a
no-connect pin was checked incorrectly, potentially causing obscure
and misleading property mismatch messages to be generated.
records, which were being ignored. This really only applies to
parallel subcircuits being flattened. To flatten correctly requires
that any circuit with N property records must be flattened into the
parent at least N times. To do: Must look for M > 1 records in the
properties and flatten (M - 1) additional times.
unconnected pins in the other netlist are marked as "(no pin)"
rather than "(no matching pin)". This allows a script parsint the
JSON file (e.g., count_lvs.py from qflow) to distinguish between a
real pin error and one that can be ignored.
without netgen noticing---this behavior got broken by an
exception for "black box" circuits, but failed to check if the
circuit really was marked as a "black box" or not. Fixing that
revealed another issue with verilog implicit pins. Both issues
have now been corrected.
other devices that do not have a "critical property" that determines
which properties can add together was flawed and messed up the sorting
of devices like transistors and resistors that do have a critical
property. Reworked the sorting order so that it makes sense for both
situations.
Also corrected a superficial issue with an attempt to print out an
instance name that doesn't exist. There is an underlying bug here
related to cells that have no pins and/or no contents which has not
been debugged. The fix just keeps netgen from segfaulting.
no pins at all. This overrides the default behavior of treating
empty cells as "black-box" entries, and avoids attempts to compare
cells like logo artwork.
different additive properties (like transistor width) to combine;
this is totally wrong and may have been left over from code written
before the routine was split into simple combinations (add similar
devices) and agressive combinations (e.g., add widths together).
class during setup, for the purpose of generating some derived
value that is used for merging and sorting, such as area = l*w.
Note that this likely needs adjusting so that the expression is
evaluated but not replaced for the purpose of sorting, since the
values to the parameter may change after parallel and series
merging.
cause inexplicable output in case of a property error by showing a
netlist topography error instead of a property error (but the output
shows that the netlists match, and there is no reporting of any
property errors). This error was discovered while implementing a
better sorting method for parallel combination. The improved method
sorts on two properties rather than one, and so should not fall into
the error where, say, devices are sorted on W but have different L
for a device like a capacitor where no "critical" property is
specified (and other similar cases, although that is a common one).
"similar no connect" pins so that it is not done on top-level
netlists. This is mainly to deal with the problem where connections
that would normally be pins (but may have, for example, been
connected to a voltage source in a schematic that was deleted because
it was not a netlistable device) are treated as no-connects.
The parallel combination of devices with similar no-connects can then
differ between netlists that differ in describing transistors as
fingered vs. individual devices. This is an obscure case, but the
output of netgen then becomes not only wrong but difficult to
understand what happened, so it is better to avoid.
parallel and series devices. This was a fairly major error
undermining the property sorting (the case where the same number
of devices are in parallel in both circuits and need to be sorted
by, e.g., width, prior to checking for matches).
Tim Edwards
Kamyar Mohajerani
D. Mitch Bailey