DEF reading to use vector fonts on PIN labels, with some ad hoc
rules for size and rotation (may need refinement). Modified the
DEF annotation (def read -annotate) so that the preferred position
of labels is on a wire leading out from a pin connection, which
is a "safer" place to put it, in case the layout was manually
edited between the DEF read and annotation. Fixed another two
crash conditions related to read-only views. Corrected a startup
error caused by an uninitialized variable used by the "wiring"
section of the tech file.
to be annotated from a DEF file. This is particularly useful if
"def read" has been used without the "-labels" option, and the
labels are needed at some point.
in github issue #149. This causes magic to no longer write log files
for "make" and "make install" but will properly exit with a non-zero
return code on any error during compile.
Also: Corrected the command "tech drc surround <type1> <type2>" so
that it now returns the correct value when <type1> and <type2> are in
the same plane. Added new command "tech drc directional <type1> <type2>"
which works the same way as "tech drc surround" except for directional
surround rules. Used this to generate vias from "def write" with the
correct metal surround amounts included in the via definiton. The
route analysis then ignores tile slivers that make up the surrounding
material around contacts. Also implemented a method that handles
routes that are made of multiple thin tiles due to the maximum horizontal
stripes rule. Now magic handles "def write" well except for not dealing
with non-minimum-width routes unless they're specifically called out as
"special" nets.
the label to be attached to a non-contact type when the label is
actually over a contact are not handled correctly when checking if
multiple labels should belong to the same port record.
due to issues of declaring global variables; rather than track
down the correct use, just reworked it so that the value is just
an integer and takes -1 as the default (fixed timestamping
disabled).
"gds datestamp" for LEF reads. When set to non-default, all cell
definitions created from LEF macros will be given the specified
timestamp, which allows the stamps of abstract views to match the
stamps of full views, preventing issues of updated timestamps
whenever a layout is switched between views.
record to the label structure to hold the port number. One major
issue stemming from this was reported in github issue #203 by Anton
Blanchard. This commit fixes that error.
client data generated by ext2spice and attached to a node's
nodeClient record; there is an initNodeClient() routine but no
corresponding freeNodeClient() routine. Eventually had to add a
callback function passed to EFDone() and EFFlatDone() to clean up
these entries. After doing that, valgrind reports clean for all
memory allocated within ext2spice (there are other things that are
not freed but not related to a specific command, so do not need to
be treated as leaks).
this limited ports to 16384, which seemed reasonable at the time.
However, the sky130_sram_macro layouts connect power and ground in a
way that when coupled with "extract unique" can generate tens of
thousands of ports and overrun the bit field, showing that automation
can do the unexpected. The solution was to split out the port number
from the label record as its own 32-bit value.
statements, with all "hard" connections being enumerated in the
same PORT entry, and "soft" connections (same label on unconnected
areas; e.g., through substrate or resistor device) being
enumerated as separate PORT entries, per the LEF spec. Also
corrected behavior with respect to the "lef write -toplayer"
option, which was treating each port label independently, and so
generating entries for lower layers of a port if there were ports
on those layers, in contravention to the "-toplayer" option.
Also: Added the PINS section to the "def write" output; this had
been left as a "to be completed" item but was never done in spite
of being easy to add.
commands on selections in a cell that is not editable. Moves
and Copies were already handled correctly; this correction fixes
Delete and transforms (e.g., rotates and flips).
an optional extra argument to the "select" command that can be used
to select labels by glob-style matching; e.g., "select area labels
VSS*" or "select less area labels *_1". This will help in managing
labels after flattening a standard cell design; e.g., by using
"select less area labels */VDD".
all geometry will be handled; the previous behavior expected only
a single rectangle per pin and so would only acknowledge the last
entry in any list of rectangles for the pin.
argument to "lef write" take an optional value which is a setback
distance, similar to "-hide", but specifically for limiting the
distance that pins can extend into the center of a macro.
to stop the search whenever a cell is not found. Used this to implement
a new option for GDS writes, "gds undefined allow|disallow" (default
"disallow") controls whether or not GDS with undefined references will
be allowed to be written. Similarly affects CIF and LEF writes, extraction,
and DRC (when running "drc check" from the top).
I'm seeing warnings when parsing a DEF with BLOCKAGES in it:
DEF read, Line 572201 (Message): Unknown keyword "BLOCKAGES" in DEF file; ignoring.
DEF read, Line 572202 (Message): Unknown keyword "-" in DEF file; ignoring.
DEF read, Line 572205 (Error): END statement out of context.
Skip over the section.
Corrected the "lef write -hide" command option so that obstructions
outside of the boundary are included in the obstruction list, in
addition to the block inside. This had previously been done
correctly for use with the "setback" option but would fail only
for setback = 0.
Ghazy) to read pin uses from a DEF file, including the three types
that are not defined by the LEF format (go figure). Expanded the
bitmask of label flags to include the additional use types. Also
shifted the label flag bitmask up to make additional room for more
port number, as there is no point in having unused bits in the
bitmask.
defMakeInverseLayerMap() from returning complete contact types when used
by the lefWrite command when writing LEF macros, which contain cut layers
but not entire contacts.
on cells with multiple ports per pin. As written, the code was
erasing all labels before creating a new port label, which would
erase all previous port labels. This should have been done only on
the first port.
read". While "lef read" normally annotates existing layout, this
option ensures that no additional cells are created from macros in
the input LEF file. (2) Added a check on the "Input off lambda grid"
warning during CIF/GDS input such that it is not repeated once issued,
as it tends to be output many times when it occurs.
are considered an exception to the "-toplayer" restriction; this is
because masterslice well/substrate layers will affect the electrical
connectivity between port and sustrate or well.
command when annotating an existing layout from a LEF database, if
there is a port in the layout that is shadowed by a label with the
same name that is not a port.
Tim Edwards
Anton Blanchard
Maximo
Dan Moore