values in a mask hints property, and added back the handling of
mask hints in the top level cell, since the hierarchical function
on cells does not apply the function to the top level.
tech file format "version" section. This can be used to specify the
version of magic that must be used to be compatible with the tech file.
This effectively supercedes the technology version number. (2) Changed
the behavior of "make" to set the version and revision numbers on doing
"make" instead of "configure". This allows the version to update
correctly after doing a "git pull" followed by "make" without doing
"configure" in between. (3) Fixed a couple of issues that were flagged
as compile-time warnings.
layers that are normally automatically generated to be supplemented
with additional geometry in the form of properties. The first
commit implements a CIF operator "mask-hints" that tells CIFGenLayer
that additional geometry may be specified with a property named
"MASKHINTS_" plus the name passed to the operator as its only
argument. A more extensive commit to be done will allow this
operator to be used on cifinput to use mask hints to retain the
exact geometry of mask layers used in the input file.
Ghazy) to read pin uses from a DEF file, including the three types
that are not defined by the LEF format (go figure). Expanded the
bitmask of label flags to include the additional use types. Also
shifted the label flag bitmask up to make additional room for more
port number, as there is no point in having unused bits in the
bitmask.
to allow a "gds read" command to ignore cells in the GDS which already
exist in memory. This allows magic to be "pre-seeded" with specific
views of cells in the GDS. Default is false, which is backwards-
compatble behavior. (2) Changed the behavior of the the way the use
path is written to and read from a .mag file, checking the path prefix
against Tcl variables PDK_PATH, PDKPATH, PDK_ROOT, and PDKROOT, and
replacing any such leading path component with the variable name.
On reading a .mag file, any variable name at the start of the path
that matches a Tcl variable will be substituted.
unique" code. It was using DBEraseLabelsByContent() which would
erase all matching labels, and could potentially erase labels that
were still remaining on the list being processed, causing a segfault.
Also corrected minor errors identified by valgrind during debugging
the above-referenced problem.
Instead of a 6-character suffix generated randomly, the 6-character
suffix is generated by a hash algorithm from the device parameters.
If the cell parameters are changed, then the cell itself changes.
If the instance name was default (derived from the cell name) then
the instance name changes accordingly. The result is that there
cannot be two (auto-)generated cells with the same parameters but
with different cell names.
of an alias that defines only one type (which is treated like it
would be if it were declared on the same line as the original type
declaration), such that the alias name does not become the default
name for the layer (which is the one that ends up showing in the
title bar when hovering over the layer toolbar icon). Mainly the
problem showed up as "nwell" for the sky130A process appearing in the
toolbar as "allwellplane".
easier to scan through a cell's ports. Used that capability in the
"readspice" script to handle case sensitivity problems, and to find
labels that are not ports and force them to be ports to match the
reference netlist.
command fails for the tutorial tut3d cell due to a missing
initialization of the cd_cellPlane record in DBCellCopyDefBody().
This was missed in the implementation of "bplane", and was not
checked because the routine is only called from the "plow" command
routines.
could cause serious errors on systems that do not auto-zero allocated
memory. Also: Fixed an error introduced by a recent commit to allocate
character memory for efReadLine() which frees the memory before reading
a .res.ext file, causing a crash when using "ext2spice" with the
"extresist on" option.
optional name field to the "substrate" line in the extract section
of the techfile. This is the default name of the substrate if not
connected to anything labeled. It may use a Tcl variable (preferred).
(2) Added command option "instance orientation [-def]" that returns
the orientation of the named or selected instance. The -def option
returns the orientation using DEF naming convention; otherwise, the
naming used with "getcell" is generated.
argument as a pointer but also set the same variable to the
return value. This is ambiguous, because the behavior depends on
whether the value being set upon return is the original value or
the reallocated value. The result is system-dependent behavior.
of cell name dereferencing on file loads, where the cell load
subroutine call ended up with the wrong number of arguments,
resulting in an invalid pointer and a crash condition.
related to that cell (since elements are usually temporary and so
kept in a separate list, not in the cell). Corrected a major error
in the bplane implementation that failed to remove a cell use from
the child def's parent list when deleting the use. Can cause magic
to go into an infinite loop, especially after selecting and unselecting
cells.
unrecognized layers when the "readonly" read option is set.
Added support to scale elements (from the "element" command,
such as the measurement text and arrows) when the grid scales,
which was missing. Corrected the output of persistent elements
in a .mag file so that they are correctly scaled by the scale
reducer.
called the undo record generation twice when transforming (move,
copy, etc.) cell instances. This would cause the "undo" command
to regenerate the old instance position in the bplane records,
generally causing trouble down the road (did not encounter any
fatal errors, but it can't be good).
not copy labels; not copying labels speeds up the antenna checks
(which don't need labels) greatly. Also fixed several numerical
overflow problems in the antenna checks, which resulted in false
positive errors, as well as nonsensical results.
magic crashed when the conSrArea array exceeded the size of a 32-bit
int during the antenna rule check. Should be good for another four
orders of magnitude.
the last couple of days, was left in a state where it keeps appending
".mag" to the filename if "save" or "writeall" is executed more than
once in the same edit session. Also, added ext2sim.sh and ext2spice.sh
to the CLEANS list in tcltk, and added both to .gitignore so they are
not tracked. Removed them from git to stop the current tracking.
Conflicts:
VERSION
Merged recent changes from master back into bplane, as the efficiency of
bplane for doing extraction on large layouts is unquestionably better.
Fixed the implementation of DBMoveCell() for bplane. Corrected an error
in the bplane version of dbScaleCell() that enumerates cell uses but
does not free the list.
as an optional argument (which it is), and so defaults were not
applied, potentially leading to the wrong number of rows/columns in
a generated via if ROWCOL is not present in the DEF file.
coordinate system origin to the specified (current) location.
This is a much more efficient method than selecting everything in
a layout and moving it, especially for very large layouts where
selection and moving becomes prohibitive.
Conflicts:
VERSION
calma/Depend
cif/Depend
cmwind/Depend
commands/Depend
database/Depend
dbwind/Depend
debug/Depend
drc/Depend
ext2sim/Depend
ext2spice/Depend
extflat/Depend
extract/Depend
garouter/Depend
gcr/Depend
graphics/Depend
grouter/Depend
irouter/Depend
lef/Depend
lisp/Depend
mzrouter/Depend
netmenu/Depend
plot/Depend
plow/Depend
resis/Depend
router/Depend
select/Depend
sim/Depend
tcltk/Depend
textio/Depend
tiles/Depend
utils/Depend
windows/Depend
wiring/Depend
Merged recent changes from master branch into bplane branch. Testing the
bplane implementation which has about a 5x improvement in extraction times
for large layouts, which is significant enough to move ahead with the bplane
implementation; however, the bplane implementation has not been thoroughly
vetted yet, so it will remain a branch until such time that it has been
validated.
substrate more than once for the same subcell, since the substrate
extraction method scans the entire plane area; this was making
large standard cell layouts extract very slowly, as every component
cell was causing the substrate search to be repeated.
extraction: Fixed a problem causing long extraction times, at
least some of which had to do with a poor string hash function
implementation. Fixed a huge problem in ext2spice, where the
node merge function was particularly poorly implemented, causing
exponentially increasing processing times with layout size.
Corrected a minor issue with ext2spice where arguments were
improperly specified, causing unnecessary error messages to be
issued. Fixed an error in the "load -dereference" command option,
which again caused unnecessary error messages to be issued.
Changed .gitignore to ignore Depend files, which are now regenerated
on every build.
Conflicts:
VERSION
database/DBcellsrch.c
database/DBconnect.c
extract/ExtInter.c
lef/Depend
utils/Depend
Updated bplane branch with all changes to master since the bplane branch
was last modified.
changed to ignore labels below the top level of hierarchy. This
turned out to be a bad idea. However, the original behavior was
problematic due to confusion over what part of the hierarchy the
labels were in. The new behavior prefixes each label with the
cell hierarchy, eliminating both problems. (2) Corrected the
problem where the attachment box for rendered labels is not
displayed if the label name is not in the viewing area. (3)
Corrected the problem where redirection of input from the layout
window to the console window with the ":" command gets inadvertently
canceled; this turned out to be due to a missing "*bypass" in
front of the command that finds the output scale to display the
pointer coordinates, and this was happening whenever the mouse was
moved while typing in a command.
down in the hierarchy when selecting a region or net, but with a
(hopefully very useful) twist: To avoid the problem of ambiguous
labels in subcells, the subcell name hierarchy is generated in
the same way as is done when flattening a cell, with the instance
name prepended. For example, when selecting a net in a standard
cell design, a terminal would highlight the name "OR2X1_1/B"
instead of just "B".
Tim Edwards
Anton Blanchard