been broken ever since moving to the Tcl/Tk wrapped version. Added
some new features that allow background commands from the window
handling (like pointer tracking) to be omitted from the log file
via a suspend/resume function. Added a header file and a few
commands at the top of the log file that align the log file contents
with the screen and box state at the start of logging. This makes
a log file which can be "played back" by sourcing it from the magic
console prompt. Per request from Harald Pretl.
"drc printrules". Implemented a new "drc" command option called
"drc ignore", which can be used to suppress reporting of specific
rules, for both "drc why" and "drc find". This can help with
finding an error buried among a large number of other errors.
with "extract do local" now being equivalent to "extract path .".
This allows extraction files to be put in a subdirectory and not
clog up the current working directory. Also: Fixed some behavior
around the use of "ext2spice -p <path>" so that it (1) works, and
(2) is compatible with the new "extract path". Since the ext2spice
and ext2sim commands are effectively independent of the primary
extraction, the "-p" option is needed to correspond to the use of
"extract path". Hopefully this is seen as only a minor inconvenience.
that aren't actually handled by the "lef write" command. The three
mentions are "LEFsource", "LEFuse", and "LEFshape", all of which
refer to names of pin properties, not macro properties. These
mentions were probably left over from early work.
"cif *hier write disable" and "cif *array write disable" commands
for a specific cell def and its descendents. The revision ensures
that all descendents apply the override. The "cif write" command
uses a stack instead of recursion, which makes it difficult to
apply the same method. Currently the method only works for the
"gds write" command, and implementing the feature for "cif write"
is deemed not worth the effort.
of a label from the command line. Also fixed a long-standing
irritation that "setlabel" would change the properties of a label
in the edit cell but not in the selection itself, which would
cause the label to be drawn both with the original properties
in the selection and the new properties in the edit cell. Now
both views will track the same changes.
tech file to correct the underlying problem with the SkyWater
sky130 process in which a different layer/purpose pair is used
for TEXTTYPE and DATATYPE for the same layer. Previously, all
output from magic writes the same pair for both when writing a
port label. The new method preserves existing syntax, although
there are some differences based on what order the "port"
statement appears relative to other types for the same layer.
should have been done a long time ago! Allows an instance to be
flattened in place inside a cell def, which otherwise requires
a complicated set of commands to do. Also: Modified the polygon
handling routine from the previous commit so that it correctly
removes the polygon cell defs after flattening them into the
parent cell.
attempt is made to write an abstract view to GDS. This behavior can
be overridded with the new command option "gds abstract [enable|disable]".
Also: Corrected extraction to allow split tiles to be set as the
reference tile for a node. Previously this was allowed only if the
tile was the first to be searched, but that can cause different tiles to
be marked as the reference depending on where the search starts,
resulting in different names for the same node in .ext files, which is
bad. Also: Modified the LEF annotation to avoid bad entries in the LEF
that would create layers in the layout where none exist.
calculation of the area to check for output and the clip box
does not reduce the size of any layer associated with the
fixed bounding box declared by the FIXED_BBOX property.
flattening based on cells which have a property "flatten". Also:
Modified the DEF read and write to convert DIEAREA into a
FIXED_BBOX property. This solves issues with placing of components
from DEF, when those components may not have have come from place &
route and may not have P&R bounding boxes. Also: Fixed the
documentation for the "dump" command, which was missing the optional
orientation in the description.
Compression levels of the output can be controlled with the "gds
compress [<value>]" command, where <value> 0 (default) is uncompressed
output, 6 is "normal" gzip compression, and 9 is maximum compression.
which instead of defining a device or subcircuit that exists inside
the cell, instead redefines the cell itself as a device or subcircuit
model that exists in the PDK. This is used where a specific layout
subcell has its own associated device definition in the PDK. Instead
of the "device" property value being the line that gets generated for
a device in the subcells .ext file, the property value should be the
word "primitive" optionally followed by any parameters that need to
be passed to the subcircuit call.
"gds datestamp" for LEF reads. When set to non-default, all cell
definitions created from LEF macros will be given the specified
timestamp, which allows the stamps of abstract views to match the
stamps of full views, preventing issues of updated timestamps
whenever a layout is switched between views.
"writeall force <cell>" is used but <cell> doesn't exist, and (2)
to add options "writeall modified" and "writeall noupdate" (which
may or may not be useful).
yesterday's commit to allow the syntax "gds maskhints <types>", in
which mask hints can be restricted to a specific list of layers
rather than all layers which define mask hints in the cifoutput
rule.
behavior, in which all cells read from GDS are given a zero
timestamp, and the timestamp is set when the file is written to
disk, the default behavior now is to set the layout cell's timestamp
from the timestamp provided in the GDS (the creation date timestamp,
specifically). The same command "gds datestamp" implemented in the
previous commit for GDS writes now also applies to GDS reads: If
set to "no", then the timestamp value from the GDS file is
transferred to the layout view (default behavior); if set to "yes",
then the timestamp is set to zero (legacy behavior). If set to
a value, then the value is used as the timestamp.
The website documentation now points to these contents in a clone
of the repository on opencircuitdesign.com, so all future edits of
the command-line documentation will be made directly to the git
repository. Also: Changed the precision of box values printed in
microns from 2 to 3 digits after the decimal place, so that 5 nanometer
grids do not get values clipped in the output.
Tim Edwards
Alex Coffin