bounds should be called whenever an entry is changed and either
the entry window loses focus or the <Enter> key is pressed.
This had ended up disabled when the scrollbar was added to the
dialog window, causing the window hierarchy to change, which
invalidated the regexp used to identify the entry and checkbox
widgets.
cuts per contact area during parasitic resistance extraction.
Previously, the result was divided by the via pitch twice,
resulting in most contact areas being reported as a single
cut.
in DEF read and write. The NONDEFAULT LAYER WIREEXT was assumed
to refer to the default wire extension at segments, when instead
it refers to the wire extension only at vias. The wire
extension at segments is presumably defined by the nondefault
segment (and wire extension at vias remains unimplemented, which
is probably not a big issue because everyone puts the wire
extensions into the via definitions anyway).
all of its time running area searches on zero-area rectangles,
which was causing simple extractions to run hours. Checking for
a zero area rectangle and conditionally skipping the area search
resulted in a massive speed-up in parasitic extraction.
because commands issued during initialization set the DRC status
in a way that causes DRCContinuous() to return immediately.
Also: Implemented a slightly different method when automatically
finding the tech file from the input .mag file that loads a
technology .magicrc file if one exists. If not, just the .tech
file is loaded. This replaces the method of a previous commit
that loads the technology .tcl script. The .magicrc file will
include the .tcl script but does other things as well.
the time the option was implemented), and also implemented (and
documented!) a similar command option "extract stepsize" for
reporting or changing the extraction step size.
out where to find the technology corresponding to a file given on
the command line: (1) Changed the default search location from
/usr/share/pdk to /usr/local/share/pdk, which is the actual default
for open_pdks (can still be overridden by environment variable
PDK_ROOT). (2) Made the PDK name by itself preferable to the PDK
name plus any extension when searching (e.g., "sky130A" is preferred
over "sky130A_backup"). (3) Check the located directory for any
file <tech_name>.tcl and source it if it exists. (4) Run any tag
callbacks on the "tech load" command, which rebuilds the tool icons.
when a label has no area and magic has to go searching for the
label area. The resulting behavior is better but is not really
a substitute for adding ports on the proper layers in the proper
locations for routing connections.
(fixes some issues around python3 on the Mac, python3 conflicting
with that found by /usr/bin/env, and an issue around "make clean"
attempting to rebuild the Depend files).
engine. Rule checks of triggering rules are not subject to
clipping to the clip area. However, they *must* be clipped to
the (larger) overall DRC check area, because no layout is valid
outside of that area. This clipping was missed, allowing
triggering rules to trigger on areas outside the valid layout,
resulting in mysterious false-positive DRC errors. This has
been fixed.
Lookup() is used for command-line parsing in magic and accepts any
unique string that matches a partial keyword. LEF and DEF do not
allow partial keywords, so only LookupFull() is appropriate to use
for LEF and DEF file parsing. This fixes issue #263 from Christian
Haufe.
command for use with "extract path"; the cellname was being cleared
after generating the filename with the extract path, but was being
used afterward, so it needed to be reverted back to the original
value, not just free'd. Otherwise "extresist" will fail to produce
any results.
".res.ext" file from "extresist" after using "extract do local" (and
probably with "extract path" as well). Fixed this, and also made
sure that "extresist" writes the ".res.ext" file to the same location
as ".ext" always, so that handling is consistent throughout the
full R-C extraction process, across the use of "extract", "ext2sim",
"extresist", and "ext2spice".
front of the list during extraction, except that after copying
they're not. Removed the expectation, although that causes the
entire linked list of labels to be parsed and may cause excessive
run-times in pathological situations. Keep an eye out for
unintended consequences.
to catch cases where a device terminal is connected to the global
substrate node even when the terminal is not specifically a substrate
terminal (e.g., diode cathode or bipolar collector) and mark them with
the "substrate is port" flag.
unrelated nets to be captured in the same selection, due to the
use of the label bounding box instead of the label rectangle.
The bounding box is used for display only and should not be used
for connectivity.
warning messages about ports being electrically connected when
those ports have names that match under rules of case-insensitivity,
and the .ext file is being read for the purpose of generating a
SPICE netlist, which is case-insensitive. Also: Corrected a crash
condition when using "extract path <name>" when directory <name>
does not exist.
become truncated, causing the "About" menu item in the console
to generate an error message. Since the tkcon.tcl used in my
other software packages like IRSIM was correct, I just pulled
the RCS string from there, and it seems to be okay now. This
solves github issue #259.
of command logging, which caused the "select cell <instance>" command
option to become invalid; this command option is used by the
parameterized cell generator and makes it impossible to edit the
parameterized cells.
and would keep files open (even though they were not marked as
locked) and not close them, causing an open file descriptor overflow
when too many files are read for the same design.
meaning of the MAG record in GDS files. Most available GDS
documentation is decidedly vague about what MAG means. Most
layout tools seem to interpret a MAG of 1 as corresponding to a
text height of 1um. However, there are a few tools that
interpret it as 1 centimicron, and there's no reason to assume
that any given interpretation is correct. "gds magscale" allows
the scale to be redefined.
the assumption of case insensitivity (e.g., VSS, Vss, and vss)
are kept separate even when writing SPICE netlists, which are
case insensitive. The code fix both avoids flagging these ports
when running ext2spice, and more importantly, allows the use of
"ext2spice short" without these ports ending up separate in the
output netlist.
to be declared for each device model, so that different models can
be specified for different parameter ranges. For example, this
will simplify the definition of the high-sheet-rho poly resistors
and the bipolar transistors in sky130 by removing the need for ID
marker layers; it also allows the correct device model to be
extracted when reading data from GDS that does not contain the
extra (and not foundry-approved) ID markers.
nets to be avoided for running antenna gate and diffusion area
checks when doing "lef write", which is to check if the pin of
the net is flagged with use "power" or use "ground". This avoids
the need to use the (recently added) "lef nocheck" option (although
that still exists as an additional way to control which nets do and
do not get checked).
been broken ever since moving to the Tcl/Tk wrapped version. Added
some new features that allow background commands from the window
handling (like pointer tracking) to be omitted from the log file
via a suspend/resume function. Added a header file and a few
commands at the top of the log file that align the log file contents
with the screen and box state at the start of logging. This makes
a log file which can be "played back" by sourcing it from the magic
console prompt. Per request from Harald Pretl.
list for output, but that the code in ExtRegion.c does not sort a
region's label list to keep ports at the beginning of the list. So
any net with multiple labels may end up with a non-port label as
the name of the node, which eventually becomes the name of the port.
A quick fix keeps these lists sorted.
"drc printrules". Implemented a new "drc" command option called
"drc ignore", which can be used to suppress reporting of specific
rules, for both "drc why" and "drc find". This can help with
finding an error buried among a large number of other errors.
be output twice for scaled devices (such as diodes in the sky130
process). Above and beyond the typo, though, the implementation
of offsets is not very well thought out and needs to be revised.
For one, the +/- notation can be confused with signs in the
parameter expression; that is also fixed in this commit. But
there is currently no way to express both a scale and an offset
for a device parameter.
'+' and '-' in the same way that '*' is currently used for specifying
a parameter scaling. The combination of a scale and offset for the
same parameter has not (yet) been implemented.
with "extract do local" now being equivalent to "extract path .".
This allows extraction files to be put in a subdirectory and not
clog up the current working directory. Also: Fixed some behavior
around the use of "ext2spice -p <path>" so that it (1) works, and
(2) is compatible with the new "extract path". Since the ext2spice
and ext2sim commands are effectively independent of the primary
extraction, the "-p" option is needed to correspond to the use of
"extract path". Hopefully this is seen as only a minor inconvenience.
to create a list of net names to ignore for antenna gate and
diffusion area checks. This allows the nets not to have to be
selected in their entirity but selected by chunk only. This
reduces the time to write LEF on a large layout back to approximately
what it was before the change to include the hidden area from "-hide"
in the antenna area checks. Plus, it greatly reduces the time to
generate LEF for large layouts when not using the "-hide" option.
perimeter are not initialized, and if a terminal perimeter/area
calculation is missed (which is happening on devices with terminals
in planes other than the plane of the identifying type), then the
perimeter/area of a previously handled device will get output.
(2) Corrected an error with "flatten -inplace" in which the command
fails to deal with instance arrays.
NaN results for devices which are not FETs (specifically, devices
that are declared using "msubckt" but are not FETs, although there
may have been a related issue with non-FET devices not getting the
correct M count), due to the device having zero measured width or
length. NOTE: This may need more investigation. If a subcircuit
device's method of merging cannot be understood, then such devices
should never extract with "merge aggressive", and should always
merge conservatively if and only if all parameters match.
when reading .ext files with "equiv" statements in them. The
generation of "equiv" statements was expanded recently, making it
more likely for this issue to show up. There may be devices in
a file that have a terminal node pointing to the node that gets
removed, and these must be updated to point to the node that
remains after merging. This requires a full loop over all
devices and so could have a potentially large impact; but in
general there are not many equiv statements (implying multiple
different labels attached to the same node) and so it is unlikely
that there would be a noticeable performance hit in practice.
gate and diffusion area on each pin is done before erasing parts
of the cell that are to be hidden by obstruction layers. That
preserves the antenna information even when "-hide" is used. This
corrects the issue raised by Kareem Farid in the github issue
tracker #236.
"space" is considered part of the substrate, then the check for
planes to search should exclude "space" from the type mask
first. Otherwise, all planes get searched, not just the substrate.
Also: The same routine can falsely flag a device terminal as
substrate if a split tile is marked as the device's region. This
was also fixed.
previous behavior that had inadvertently been changed. In recent
versions, "load <absolute_path> -dereference" would incorrectly
apply the dereferencing to <absolute_path> rather than just its
subcells. Cleaned up the code around DBCellRead() in the process,
so everything is more straightforward (although probably more
could be done in that regard).
of the cell. This will greatly help in diagnosing issues when
reading cells from multiple locations including cwd, relative
paths, PDK libraries, and the search path. Also: Reworked
the timestamp update message so that it prints all at once at
the end of processing, not printing output for every cell
processed as it is being processed. That prevents output from
the file read routine from getting interleaved with the
timestamp processing output.
labels that are not connected to their declared layers. It's the
latter type that need additional processing in ExtSubtree.
Limiting this processing significantly cuts down on processing
time when there are many labels in a layout, as happens with the
"def read -labels" command option.
can result in negative resistors due to integer overflow. In all
cases, the target was floating-point and it was only necessary to
recast everything to float first.
Tim Edwards