warning messages about ports being electrically connected when
those ports have names that match under rules of case-insensitivity,
and the .ext file is being read for the purpose of generating a
SPICE netlist, which is case-insensitive. Also: Corrected a crash
condition when using "extract path <name>" when directory <name>
does not exist.
nets to be avoided for running antenna gate and diffusion area
checks when doing "lef write", which is to check if the pin of
the net is flagged with use "power" or use "ground". This avoids
the need to use the (recently added) "lef nocheck" option (although
that still exists as an additional way to control which nets do and
do not get checked).
to create a list of net names to ignore for antenna gate and
diffusion area checks. This allows the nets not to have to be
selected in their entirity but selected by chunk only. This
reduces the time to write LEF on a large layout back to approximately
what it was before the change to include the hidden area from "-hide"
in the antenna area checks. Plus, it greatly reduces the time to
generate LEF for large layouts when not using the "-hide" option.
gate and diffusion area on each pin is done before erasing parts
of the cell that are to be hidden by obstruction layers. That
preserves the antenna information even when "-hide" is used. This
corrects the issue raised by Kareem Farid in the github issue
tracker #236.
previous behavior that had inadvertently been changed. In recent
versions, "load <absolute_path> -dereference" would incorrectly
apply the dereferencing to <absolute_path> rather than just its
subcells. Cleaned up the code around DBCellRead() in the process,
so everything is more straightforward (although probably more
could be done in that regard).
dereferencing, and making the behavior of "load" on the command
line (i.e., loading a cell from a file) the same as the
behavior of loading a cell as a result of expanding an unloaded
instance. In both cases, if "load -dereference" is used, and
a cell does not exist in any search path but does exist in the
original location, without dereferencing, then the cell will be
loaded from the original location. Also: Corrected an error
that has existed since adding the capability to read compressed
files, which causes magic to crash when attempting to run the
"crash recover" command (because that routine was mixing
compressed and regular file stream calls).
for compatible layout over the area of the pin rectangle in the
entire hierarchy of the cell, not just in the top level. This
corrects issues where pins are placed in the top level cell with
no metal underneath. It is written in such a way that it will
work regardless of whether paint is split across the hierarchy,
or the label spans different types (such as crossing a contact).
in the input. The name of one was being modified but was being
right-justified into the string, resulting in a name starting with
many space characters. Also: Fixed an issue with extresist where
a label that ends up with an empty string can become a node with
an empty string name in the .res.ext file output.
pin on a compatible area due to an incorrect type mask. (Also
note that this routine only works (after correction) for RECT
statements, but there should be a similar check for POLYGON
statements.)
contacts) take default values from the DRC section. Since both
are in lambda, but the DRC section uses a two-part integer and
modulus representation, if default values are taken before
scaling, the LEF layers may get rounded values. This has been
solved by marking values with -1 to indicate that they require
defaults, and then set those defaults (from scaled DRC rules)
after scaling all other tech values.
redundant (same name, different net). Previously, the method was
to keep the first such node and ignore all others except to add
their resistance and capacitance to the original node. This
prevented routines like "def write" from enumerating all nets
unless they had unique names. The new method keeps the additional
records including the node location where they can be found by
EFNodeVisit(), but flags them with EF_UNIQUE_NODE so that routines
like ext2spice or ext2sim can choose to ignore them. This implies
that this method could be used to reimplement "extract unique"
within "ext2spice" or "ext2sim" without altering label text. This
has not yet been implemented.
Both were corrected with respect to the definition of non-default
(taper) rules. "def write" was additionally modified to avoid
redundantly processing tiles where tile areas were merged together
to form a complete wire. There is plenty of room for optimization,
but the output appears to be matching the layout. Also: Revised
the definition of "(not) visible layers" to include labels attached
to those layers, so that turning off visibility of any layer will
also hide all labels attached to that layer.
option. This is important as the default units of 1nm are not
necessarily able to be converted to integer values if the
minimum manufacturing grid is an odd number of nanometers.
"slivers"; the error tended to produce artifacts (extra metal)
around contacts. Fixed an issue that caused the DEF write routine
to open the same file twice instead of a new file for the second
part of the DEF data, and then potentially hit a runaway condition
when trying to merge the two files together.
routine; that is incorrect, and it should have been fgets().
When dbFgets() is recast to a zlib version, then its use in
"def write" causes magic to crash.
attempt is made to write an abstract view to GDS. This behavior can
be overridded with the new command option "gds abstract [enable|disable]".
Also: Corrected extraction to allow split tiles to be set as the
reference tile for a node. Previously this was allowed only if the
tile was the first to be searched, but that can cause different tiles to
be marked as the reference depending on where the search starts,
resulting in different names for the same node in .ext files, which is
bad. Also: Modified the LEF annotation to avoid bad entries in the LEF
that would create layers in the layout where none exist.
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
flattening based on cells which have a property "flatten". Also:
Modified the DEF read and write to convert DIEAREA into a
FIXED_BBOX property. This solves issues with placing of components
from DEF, when those components may not have have come from place &
route and may not have P&R bounding boxes. Also: Fixed the
documentation for the "dump" command, which was missing the optional
orientation in the description.
that are unattached (type = space) will cause magic to crash on
the command "lef write -hide"---The lowest level issue was in
SelectChunk(), so for good measure SelectChunk() now checks for
type == TT_SPACE, and "lef write" does also.
non-default rules and so can accurately capture wire widths other
than the technology LEF defaults (also corrected a bug with non-
default rules for "def read"). Corrected via handling in "def
write" to function as claimed (although the algorithm is still
naive and expects all contacts to be rectangular, which is usually
true but doesn't have to be).
with class, use, and shape information from the DEF file PINS record.
This is similar to what is done with LEF file annotation, but less
sophisticated (only erases an existing pin if it is an exact match
for pin name and location).
DEF reading to use vector fonts on PIN labels, with some ad hoc
rules for size and rotation (may need refinement). Modified the
DEF annotation (def read -annotate) so that the preferred position
of labels is on a wire leading out from a pin connection, which
is a "safer" place to put it, in case the layout was manually
edited between the DEF read and annotation. Fixed another two
crash conditions related to read-only views. Corrected a startup
error caused by an uninitialized variable used by the "wiring"
section of the tech file.
to be annotated from a DEF file. This is particularly useful if
"def read" has been used without the "-labels" option, and the
labels are needed at some point.
in github issue #149. This causes magic to no longer write log files
for "make" and "make install" but will properly exit with a non-zero
return code on any error during compile.
Also: Corrected the command "tech drc surround <type1> <type2>" so
that it now returns the correct value when <type1> and <type2> are in
the same plane. Added new command "tech drc directional <type1> <type2>"
which works the same way as "tech drc surround" except for directional
surround rules. Used this to generate vias from "def write" with the
correct metal surround amounts included in the via definiton. The
route analysis then ignores tile slivers that make up the surrounding
material around contacts. Also implemented a method that handles
routes that are made of multiple thin tiles due to the maximum horizontal
stripes rule. Now magic handles "def write" well except for not dealing
with non-minimum-width routes unless they're specifically called out as
"special" nets.
the label to be attached to a non-contact type when the label is
actually over a contact are not handled correctly when checking if
multiple labels should belong to the same port record.
due to issues of declaring global variables; rather than track
down the correct use, just reworked it so that the value is just
an integer and takes -1 as the default (fixed timestamping
disabled).
"gds datestamp" for LEF reads. When set to non-default, all cell
definitions created from LEF macros will be given the specified
timestamp, which allows the stamps of abstract views to match the
stamps of full views, preventing issues of updated timestamps
whenever a layout is switched between views.
Tim Edwards
Alessandro De Laurenzis
Anton Blanchard