commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
types and substrate connections. This is an intermediate step to
switching from a sim file format to an ext file format for input,
but resolves the worst issues of having the sim file not recognize
the devices or the substrate nodes. Implemented by using the sim
subcircuit format introduced in IRSIM with the "user subcircuit"
package. Implementation unfinished (work in progress).
a long-standing error (introduced with the "extresist geometry"
option) that can cause nets not to be extracted (due to the first
record not having extraction data, which was itself a long-standing
error in the code but which was not fixed correctly); (2) handle
"device mosfet" type transistors (previously only handled the old
"fet" type extraction devices); and (3) correct for the res.ext
file having a different scalefactor relative to the .ext file. The
latter item was solved by forcing all input to scale like
ExtCurStyle->exts_unitsPerLambda, locally correcting all input as
needed. Note that extresist still needs to handle other extraction
devices (e.g., resistors and capacitors) but those will require
additional handling in the routines which analyze the current path
to determine how to break up wires into paths.
simple FET device in extresist. Also: Extended the bloat-all CIF operator
again, allowing the trigger layer for the bloat operation to include both
CIF layers and magic layers (previously only magic layers were supported).
This extension is possible due to the previous extension allowing the
trigger layer and bloating layers to be on separate planes. This operator
extension is useful for tagging geometry that is in the proximity of, but
not overlapping, geometry on another plane.
Tim Edwards