in which if a cell is read from GDS that has the same name as a cell
in memory, then the cell in memory is renamed to keep all cell names
unique in the database.
This can be done now by reading a LEF file, followed by reading
a GDS file with the "noduplicates" option set. In addition,
annotation of either the LEF view or a read-only view follows the
same protocol as cell paths in the .mag file, which is to replace
leading path components matching Tcl variables for PDKPATH or
PDKROOT, and replace the home directory path with a tilde.
worded warning if an abstract cell view is written to GDS.
Corrected the "cellname ... writeable" command to allow an
overrride of the read-only status of a cell. That change had
been made before but apparently got reverted by the recent
rollback.
flattened per "gds flatten" or "gds flatglob", and the "gds readonly"
option is not set, then the instances of the flattened cells are
removed from the layout. They are retained for the "readonly" option
because when writing GDS of such a cell, the full hierarchy needs to
be walked.
from slashes in hierarchical names. Magic does not allow slashes
in names when using "identify", so the simplest solution is just
to prohibit them in names being read from GDS files, and replace
them with underscores to make them magic-compatible. Changing
GDS names always has repercussions on things like back-annotating
delays, so it should probably be revisited in the future.
it as a single value "flags" (unsigned char) with meaningful flag
names. Added new option "-fail" to the load command to allow
magic to fail on loading a cell that does not have a corresponding
file rather than the default action of creating a new cell. Added
a flag for the "-quiet" option so that behavior on "-fail" can be
done quietly.
cell def that is marked for a "full dump" from a referenced GDS
file. This change was supposed to have been done a few commits
ago but did not work as advertised.
magic database derived layout of a cell that declares GDS_FILE
but for which the GDS file referenced cannot be found or read.
This will produce an incomplete GDS file instead of an apparently
good and complete GDS file that actually contains bad data. Also:
Added new command "random" that allows a random seed to be set,
for use with the GDS output when writing a full dump of a GDS
file. Otherwise, the output prefixes are always the same, which
defeats the purpose of adding the random prefix.
to stop the search whenever a cell is not found. Used this to implement
a new option for GDS writes, "gds undefined allow|disallow" (default
"disallow") controls whether or not GDS with undefined references will
be allowed to be written. Similarly affects CIF and LEF writes, extraction,
and DRC (when running "drc check" from the top).
"gds write" command, since "Writing cell" is easily confused with
writing a .mag database file. "Generating output" seems clearer
to me. Maybe it's just me.
of input cells on a per-cellname basis, using glob-style pattern
matching. This is probably the best way to deal with 3rd-party vendor
GDS with unfortunate practices like dividing devices up among cells in
a hierarchy, even though it comes across as a bit of a hack solution.
true, this will force the "gds write" command to write out creation
date stamps as zero. This is very useful for avoiding changing the
contents of an otherwise-unchanged layout, especially if it is in
a git repository where it will force the entire file to be replaced.
routine attempts to rescale the contents of the top-level cell after
moving forward in the GDS to find a cell that was used before it was
defined, if reading that cell caused the scale to change. However,
the numerator and denominator were reversed, causing the scaling to
be the inverse of what it should have been.
to allow a "gds read" command to ignore cells in the GDS which already
exist in memory. This allows magic to be "pre-seeded" with specific
views of cells in the GDS. Default is false, which is backwards-
compatble behavior. (2) Changed the behavior of the the way the use
path is written to and read from a .mag file, checking the path prefix
against Tcl variables PDK_PATH, PDKPATH, PDK_ROOT, and PDKROOT, and
replacing any such leading path component with the variable name.
On reading a .mag file, any variable name at the start of the path
that matches a Tcl variable will be substituted.
used both for counting cells during GDS write and for saving
geometry data from the "copyup" operator during GDS read. The write
routine does not clear the client record, and the read routine was
checking if the cd_client value was default. Corrected the resulting
crash condition by resetting cd_client before GDS reads. However, the
underlying problem is that the GDS read is reading data into a cell
that already exists in the database, and is not handling it robustly
by renaming the existing cell. So this should be revisited.
hierarchical processing from CIFGenSubcells() and CIFGenArrays(), and to
avoid certain operators that are useless and harmful when applied
hierarchically; namely squares, slots, bbox, boundary, and net.
templayers. This permits some useful interactions like growing to
the size of a bounding box, or abutment box, as well as many other
possibilities. Also: Corrected the use of "cif see" for the boundary
(abutment box) layer, which was not working because the "cif see"
command uses a flattened CellDef that does not have the boundary
property of the cell it was flattened from.
"ignore-unknown-layer-labels" is set, then error messages will not
be displayed when labels in the GDS input are on unknown layers
(this option is and has been otherwise handled correctly; the only
issue is the generation of an error message on the output).
unrecognized layers when the "readonly" read option is set.
Added support to scale elements (from the "element" command,
such as the measurement text and arrows) when the grid scales,
which was missing. Corrected the output of persistent elements
in a .mag file so that they are correctly scaled by the scale
reducer.
GDS of abstract views, such that if the cellname being dumped is the
same as the library name, then no prefix is added to subcells. This
behavior may be changed in the future.
substrate more than once for the same subcell, since the substrate
extraction method scans the entire plane area; this was making
large standard cell layouts extract very slowly, as every component
cell was causing the substrate search to be repeated.
only at the time of running the command "load". But cells are generally
loaded only on an as-needed basis, so the dereferencing option must be
saved as a flag in the cell and honored whenever its subcells are expanded
or otherwise read at a later time.
limit of the Calma definition, and probably has not done so for ages.
Nobody informed me of this. The restriction has been lifted from
GDS input and output in Magic. It can be reinstated if necessary by
setting a flag in the cifoutput section of the techfile, but it is
likely that this will not be necessary unless there are other tools
that enforce the limit and will not read a GDS file that exceeds it.
rid of redundant port entries in subcircuits. There is still an outstanding
issue as to whether nodes and connections need to be recursively iterated
to the hierarchy bottom. The current fix corrected the test case. Also,
added a "-dereference" option to the "load" command to revert to the
original behavior of using only search paths from "addpath" when searching
for files to load.
attached to a label in a GDS input file; the scalefactor that was
being used is reset at the beginning of a GDS read, and so becomes
invalid after a database rescaling, resulting in improperly scaled
label geometry if "gds read" is used more than once.
the forward-referenced GDS cell problem) in which when writing cells
from 3rd-party GDS, the structure names are written to GDS with the
indicator flag in front, making the structure names and the referenced
names different, so that the GDS file is no longer valid. This has
been fixed.
Tim Edwards
Anton Blanchard