the time the option was implemented), and also implemented (and
documented!) a similar command option "extract stepsize" for
reporting or changing the extraction step size.
"pick x y" which acts like "cursor", but operates on a database
coordinate instead of a pointer coordinate. Made a few other
corrections to the command logging code so that it produces
valid output when the log file is sourced.
of the "edit" command that takes an instance name as an argument.
This is the first of a small series of command extensions to
provide the capability to replace any command that is dependent on
the pointer position with an equivalent command that is not, for
the purpose of removing pointer and screen coordinate dependencies
from the log file created by "logcommands".
with "extract do local" now being equivalent to "extract path .".
This allows extraction files to be put in a subdirectory and not
clog up the current working directory. Also: Fixed some behavior
around the use of "ext2spice -p <path>" so that it (1) works, and
(2) is compatible with the new "extract path". Since the ext2spice
and ext2sim commands are effectively independent of the primary
extraction, the "-p" option is needed to correspond to the use of
"extract path". Hopefully this is seen as only a minor inconvenience.
previous behavior that had inadvertently been changed. In recent
versions, "load <absolute_path> -dereference" would incorrectly
apply the dereferencing to <absolute_path> rather than just its
subcells. Cleaned up the code around DBCellRead() in the process,
so everything is more straightforward (although probably more
could be done in that regard).
dereferencing, and making the behavior of "load" on the command
line (i.e., loading a cell from a file) the same as the
behavior of loading a cell as a result of expanding an unloaded
instance. In both cases, if "load -dereference" is used, and
a cell does not exist in any search path but does exist in the
original location, without dereferencing, then the cell will be
loaded from the original location. Also: Corrected an error
that has existed since adding the capability to read compressed
files, which causes magic to crash when attempting to run the
"crash recover" command (because that routine was mixing
compressed and regular file stream calls).
computing the amount of fringe shielding was wrong. This fixes
one of my example cases, but not the other one, so I still need to
pin down a condition that can result in negative capacitance.
This is diagnostic only and does not change the read-in
behavior.
(2) ext2spice: Corrected an error that had been introduced
into version 8.3.171 that accidentally marks all devices
as visited which causes all source/drain areas and
perimeters to be output as zero.
(3) extract: Sweeping changes to handling of fringe
capacitance. Removed the (recently added) "fringeshieldhalo"
parameter from the tech file. Reworked the fringe
capacitance models based on results from the "capiche"
project (github/RTimothyEdwards/capiche). Fringe shielding
is now done by clipping fringe at the boundary of a
shielding shape, rather than trying to calculate the
amount of shielding (as the "capiche" project proved this
to be equivalent). Values for partial fringing are modeled
by atan(x), which like the sidewall (1/x) curve, extends to
infinity and values are limited by the halo but do not
otherwise depend on the halo. Because of this, the halo can
be made variable and controlled by the user for deciding on
the tradeoff between accuracy and run time. A new command
option "extract halo" was added to allow this control over
the halo distance.
This commit makes the code (mostly) C99-compatible, enabling to compile
it without the -Wno-error=implicit-function-declaration flag. This
way, Magic becomes usable on arm64 architectures, specifically on Apple
computers with M1/M2 SoC.
fact that "extract all" does not enumerate cells from bottom up
as I had assumed---The order is roughly bottom-to-top, but cells
re-used in different places in the hierarchy could end up called
before one or more of their own subcells is extracted. Since
this conflicted with the preparation of the substrate in each
extracted subcircuit, I changed the method to enumerate cells so
that it is properly bottom-to-top. Also, methods were added to
"extract" (incremental), "extract cell", and "extract parents"
to ensure that the substrate is prepared on all subcells before
extraction.
connections through the substrate as the same node, and so will
not force different nodes names on the soft connection to be
unique. This should probably be selectable behavior. However, as
written, the "extract" command will always merge soft connections,
so giving them unique names just causes problems with "extract".
behave as one would expect; e.g., "cellname self" returns the name
of the currently edited cell if nothing is selected; "cellname
rename <name>" renames the currently edited cell to <name>.
Modified the "extract" command so that it will not extract a cell
named "(UNNAMED)" but will insist that the cell must be given a
proper name, much like the "writeall" command does.
to eliminate all redundant names resulting from redundant labels.
Changed the behavior of "goto" so that it will find local names with
slashes, which are the result of using "flatten". A hierarchical
search is done first, as before, but on failure to find a subcell
component, the local cell is searched for the verbatim name.
statements in the .ext file output to those that mark a port as
equivalent to the node name used elsewhere in the file. This
limits unnecessary output of "equiv" statements that can bog down
ext2spice and other commands that use the .ext file contents.
for sticky labels making connections through the hierarchy. This
is only needed for some annoying layouts that put point-size labels
with no connecting geometry in cells, and causes magic to spent
excessive amounts of time searching through labels for any layout
that has lots of labels.
could have multiple ports of the same name. This problem had been
worked over before, but there was an indpendent mechanism producing
the same result for a completely different reason, caused by subcells
being much larger than the cookie-cutter extraction method's extraction
regions. Solved by tracking port names in a hash table and preventing
re-use. (2) ext2spice was producing "no such node" errors; like (1)
this had been previously worked on, and like (1) this mechanism was
independent. Problem came from not passing -1 to extHierSubstrate for
the non-arrayed dimension of a 1-dimensional array. Also: Removed
the word "fatal" from extraction error reporting, as nearly all
extraction errors are entirely benign. This should clear up confusion
among alarmed end-users.
only at the time of running the command "load". But cells are generally
loaded only on an as-needed basis, so the dereferencing option must be
saved as a flag in the cell and honored whenever its subcells are expanded
or otherwise read at a later time.
rid of redundant port entries in subcircuits. There is still an outstanding
issue as to whether nodes and connections need to be recursively iterated
to the hierarchy bottom. The current fix corrected the test case. Also,
added a "-dereference" option to the "load" command to revert to the
original behavior of using only search paths from "addpath" when searching
for files to load.
function that was available in versions 7.1 and earlier that
allows the use of the command "erase errors" to remove DRC error
paint (only when the DRC checker is off, of course).
Darryl L. Miles
Tim Edwards
Alessandro De Laurenzis