When dumping an array word the name is implicitly converted to
an escaped identifier. If this implicit name conflicts with an
explicitly created escaped identifier this patch will print a
warning message warning that the array word will conflict with
an escaped identifier.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds better error messages (compiletf) for the optional
system tasks and functions (Annex C 1364-2005). Doing this also
makes calling them fail more gracefully (it is no longer a RE).
This patch add a new system function $readmempath. It accepts
a ":" separated list of directories that $readmem{b,h} will
use when trying to open a given file. If the file given to
$readmem{b,h} starts with a '/' (an absolute path) the search
list will not be used. A new call to $readmempath will replace
the previous search list with the given list. The search list
elements are check to see if they exist and are directories.
If not a warning will be displayed and they will not be added
to the list.
Most conversion codes in the scanf routines are supposed to
skip leading space. This patch adds that functionality.
(cherry picked from commit e987162cb9)
When the VAMS math functions were originally built we did a
straight copy of the log() function to $log(). This can
conflict with other Verilog-D definitions of $log. We
need to deprecate this function and remove it before the
next major release.
This patch adds the $fread() system function. Icarus does not
currently allow missing arguments in functions so the following
standard specified functionality is not supported:
res = $fread(mem, fd,,count);
It also fixes a memory leak in fopen related to the get_filename
refactoring I recently did.
the following example returns ||. This patch fixes it to return |0|.
module t();
wire [3:0] b;
initial
$monitor("|%0b|", b);
assign b = 0;
endmodule
(cherry picked from commit c9d2400dd0)
This patch adds compiletf routines for the $sscanf/$fscanf
functions. It does not enhance the conversion routines it
only adds better error/warning messages.
It also removed the redundant IS_MCD in some of the fileio
calltf routines. This is already checked in vpi_get_file().
I also added the vpiNetArray type to allow us to distinguish
arrays of nets from other arrays (memories). Much more is
needed here, but this solved the problem of the day. The
problem was that we needed to make sure we could assign to
the word of a variable array, but not the word of a net array.
It's actually probably not needed since Icarus converts the
net array word reference to just the net, but I thought it
prudent to make sure things didn't slip by.
This patch adds compiletf routines for the mti random functions
and adds a common routine to check for extra arguments. It also
adds file and line information to the rest of the compiletf
routines that were missing them.
This patch adds compilef routines for the readmemb/h and
writememb/h system tasks. It also fixes some errors related
to arrays with negative range values. You can not specify a
negative address in the file, but arrays with negative range
values or negative start/finish argument to the tasks are
supported. It also generates an error when reading invalid
character from the input file.
A significant amount of the code is common between the two
styles of tasks so this has been grouped into common
routines.
It also adds a common routine for getting a string that will
be used as a file name. This routine is used by any task
that requires a file name value. If a filename has a
non-printable character it will be displayed as a \octal
constant to show what the character is.
Updates the dumping routines to match each other better,
improves some error messages and fixes a bug in the LXT2
dumper when dumping greater than 32 bit delays.
This patch adds support for the other edges 01, 10, etc. These still
need to be verified in the context of IOPATHs, but they are ignored
in the timing checks and that's what was needed.
This patch updates the compiletf for $sdf_annotate() to better
check the arguments and to display the file and line location
when an error/warning does occur. It does the same for the
calltf messages. It also fixes a couple of subtle bugs.
First we need to look for a NULL string not a NULL value. The
result buffer should always be defined so will never be NULL.
Next if a scope has no modules we should return like the module
was not found (return 0) vs asserting.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
elaborate.cc:2456: warning: suggest parentheses around comparison in operand of &
vpi/vcd_priv.c:210: warning: operation on 'idx' may be undefined
Probable behavior change. Passes testsuite.
This patch cleans up the V-2005 and V-analog math functions to
free their allocated memory at the end of simulation. It also
modifies the veriusertfs code to do the same thing.
It also closes the VCD file at EOS.
This patch fixes some issues in the previous patch. Specifically
I need to use vpi_mcd_printf and some trickery was needed to
prevent the compiler from complaining about the format string.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
This patch modifies $strobe and $fstrobe to use the string
formatting routines. It also combines the $display/$write
and $fdisplay/$fwrite routines into one and removes the
old routines that are no longer needed.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
This patch makes the $fdisplay() and $fwrite() family of task
use the string formatting code. It also adds a compiletf routine
for the tasks and a run time check that the FD or MCD is correct.
If not it fails instead of just dropping the output.
It also cleans up a couple of memory leaks and adds no argument
compiletf routines for the $monitoron/$monitoroff tasks.
This patch fixes some technically benign problems found by valgrind,
but we may as well give the values a default to make sure things
work correctly. I believe that the default I choose is the
appropriate value for the context.
The other problem is that real valued (local)parameters should be
printed as a real value like a real variable, etc. Trying to
do this as a decimal with the string formatting was causing a
memory problem. I could have fixed the routine to handle this,
but the better solution was to just display things the right way.
This patch does a number of things.
It adds file and line number information to the strobe_cb_info
structure. This allows the $swrite and $sformat calls to reference
their location in warning/error messages.
Their compiletf and calltf routines also display file and line
number information in messages.
The $display routine was converted to use the string formatting
routine. This can be reverted by defining USE_OLD_DISPLAY. The
old code will be removed once there has been more testing.
A number of bugs were fixed that were discovered with the
$display code.
The output of some conversions, variables and system functions
were changed to match the original display code or to better
match expectation.
Leading zero support was added to the %b/%b, %o/%O, %h/%H, %x/%X,
%c/%C and %d/%D. The floating point conversions already supported
adding a leading zero.
This is the start of converting all the various display tasks to use
the string formatting code and a cleanup/update of the sys_display.c
file in general.
Rather then spread VERSION= defines throughout all the makefiles, put
the base version in version_base.in. Use that to generate a version.h
that includes the base version as well as the detailed version.
This reverts commit 31d67fcd3e.
The concensus has been that this causes too many build problems in
the general case and what is needed instead is a way to turn on the
extra warnings for developers only.
The code base is almost shadow-free now, so this won't add much noise to the compiles.
Problems I know about:
lxt{,2}_write.c: patch sent upstream
cflexor.c: exposes gray area of name space boundary
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
This patch set covers C code, with the notable exception of
vpi/lxt_write{,2}.c.
This patch cleans up the Makefile.in files.
We only need to delete config.log in the lower directories.
We reference the *.in files at $(srcdir)/
We need to make distclean for the tgt-(fpga,pal,verilog) directories.
This is to cleanup the Makefile.
Add some missing "rm -r f dep"
Collapse all the configure checks to a single configure script in
the root of the source tree. This makes the configure process run
a lot faster, expecially on Windows systems that are slower in general.
It is recommended that AC_CYGWIN not be used and under MinGW
the previous test was complaining about multiple calls to
AC_CANONICAL_HOST. The new test performs the same function
and also displays the MinGW status if we are compiling on
windows.
Also removed a AX_CCP_IDENT call in the vpi directory and
tgt-null is built by the top configure so there is no need
to try to run configure in that directory.
Remove the #ident and $Log$ strings from all the header files and
almost all of the C/C++ source files. I think it is better to get
this done all at once, then to wait for each of the files to be
touched and edited in unrelated patches.
This configure option causes the installed commands to have
a suffix string that makes them distinct from other versions
that also have a suffix string. This allows for multiple
installed versions of Icarus Verilog.
Also, move installed C/C++ header files into a subdirectory of
their own under the target include directory, to make clearer
the purpose and source of those files.
Cary R
Purdea Andrei
Stephen Williams
Larry Doolittle
Michael Strelnikov