We do not want to check an array word scope to see if the scope
was already included since a scope does not include array words.
They must be explicitly specified.
Make the code smarter so it can keep fewer items in the lists.
Scopes and explicitly given variables are all that is kept.
Includes a few other refinements.
This patch adds support for dumping named events to the VCD
dumper only. The LXT and LXT2 will be added once this has
been tested more. It also reworks the $dumpvars routine
to be more consistent concerning warning messages for duplicate
signal dump requests and fixes some bugs.
For events you will get extra events at T0 and at $dumpon. I
plan to fix this, but that is much more involved.
For duplicate signal warnings. Implicit duplicates loaded
automatically from a scope will not display a warning. Only
an explicit signal request will print a warning if it was
already included. All other will be silently ignored. This
should limit the warning to only what the user cares about.
For example:
$dumpvars(0, var, scope_that_includes_var);
Will work without a warning message.
$dumpvars(0, scope_that_includes_var, var);
Will generate a warning since the var was already included
by the scope request.
Other enhancements include the start of including type
information in the output. For now integer is added, the
other type information will require changes to the code
generator and hence will only be done in development.
This patch removes some of the unneeded differences in the
various dumper routines. This is the start of a complete
refactoring, but the first task is to make them as common
as possible and this is the start of that.
When dumping an array word the name is implicitly converted to
an escaped identifier. If this implicit name conflicts with an
explicitly created escaped identifier this patch will print a
warning message warning that the array word will conflict with
an escaped identifier.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds compilef routines for the readmemb/h and
writememb/h system tasks. It also fixes some errors related
to arrays with negative range values. You can not specify a
negative address in the file, but arrays with negative range
values or negative start/finish argument to the tasks are
supported. It also generates an error when reading invalid
character from the input file.
A significant amount of the code is common between the two
styles of tasks so this has been grouped into common
routines.
It also adds a common routine for getting a string that will
be used as a file name. This routine is used by any task
that requires a file name value. If a filename has a
non-printable character it will be displayed as a \octal
constant to show what the character is.
Updates the dumping routines to match each other better,
improves some error messages and fixes a bug in the LXT2
dumper when dumping greater than 32 bit delays.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
This patch cleans up the V-2005 and V-analog math functions to
free their allocated memory at the end of simulation. It also
modifies the veriusertfs code to do the same thing.
It also closes the VCD file at EOS.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
This patch set covers C code, with the notable exception of
vpi/lxt_write{,2}.c.
This patch addresses a number of issues:
Rewrote the $test$plusargs and $value$plusargs routines to have
better error/warning messages, to support runtime strings, to
correctly load bit based values (truncating, padding, negative
value), added support for the real formats using strtod() and
added "x/X" as an alias for "h/H" to match the other part of
Icarus.
Rewrite the vpip_{bin,oct,hex}_str_to_vec4 routines to ignore
embedded "_" characters. Add support for a negative value and
set the entire value to 'bx if an invalid digit is found. A
warning is printed for this case.
Rewrite vpip_dec_str_to_vec4 to ignore embedded "_" characters,
to support a single "x" or "z" constant and to return 'bx if an
invalid digit is found. A warning is printed for this case.
It simplifies the system task/functions error/warning messages.
It removes the signed flag for the bin and dec string conversions.
This was not being used (was always false) and the new negative
value support makes this obsolete.
Add support for a real variable to handle Bin, Oct, Dec and Hex
strings. They are converted into a vvp_vector4_t which is then
converted to a real value.
Add support for setting a bit based value using a real value.
Removed an unneeded rfp signal in vpip_make_reg()
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
This is a major rework on the sys_fileio routines. They now have
improved compiletf routines and the calltf routines are now
standardized. Along the way a few bug were fixed as well. Some
updates to other vpi files as well.
I changed the order of the $fputc() arguments to match C and the
rest of the system functions like it ($fungetc, etc.). I recently
fixed $fungetc() so I'm assuming the $fputc() needs the same fix.
It's an Icarus specific function.
This patch cleans up some of the code to use common compiletf
routines where appropriate. It also adds code to print the
number of extra arguments and cleans up the messages a bit.
This patch cleans up the dump routines and adds file and
line number information for errors. It also adds some of
the missing MemoryWord properties so they can now be
dumped and monitored correctly.
This patch fixes the calculation of the scope type in draw_scope.
This code is really only used in the VCD dumper so I commented it
out in the other two. The problem was that the lower scope was
used to calculate the scope type. It is also now an error to try
to draw an invalid scope type.
This patch fixes a number of problems associated with the various dumpers.
1. It catches the problem uncovered in pr1809904 and prevents the core
dumps from happening. It prints a warning message if you try to change
the file after the program has started dumping data to the file.
2. It makes all the dumpers work in the same manner. Before the VCD
$dumpfile was processed at compile time, but the LXT/LXT2 versions
did this at run time. The correct place for this is the run time so
that you can pass the task a calculated name.
3. All the dumpers use common compiletf routines located in vcd_priv.c
4. Make the LXT/LXT2 $dumpfile commands only get the file name and
let $dumpvars actually open the file. This matches the VCD code.
5. Fix the $dumpfile code to allow calculated file names.
6. Make dumpvars without a scope/variable match all toplevel modules
not just the toplevel module the $dumpvars was located in. This
now matches the standard (2001).
7. Simplify the no dumper code (vcdoff.c) and add missing functions.
8. Cleanup the code and messages.
9. vvp can take -none for no dumper.
The LXT and LXT2 formats ignore/work with duplicate variables in
$dumpvars() commands, but VCD output includes extra definitions that
may cause some confusion. This patch checks for duplicates and prints
a warning when they are being suppressed.
It also corrects some error messages in the LXT and LXT2 files to not
reference VCD and some other message cleanup.
GTKWave needs to have escaped identifiers properly escaped (preceded
with a back slash) in its VCD input. Without this the name may not
display correctly. Even though it is not required, to keep things
consistent LXT and LXT2 formats also prefix escaped identifiers with
a back slash.
This patch adds marks at simulation end if needed and enabled (on
and not over the limit) for vcd/lxt/lxt2 files. End of simulation
callbacks also now have the correct simulation time. The default
file names for lxt and lxt2 now match the vcd file except for the
extension. lx2 is also an alias for lxt2 and the default lxt2 file
extension is lx2. This matches what GTKWave expects. Any lxt2
diagnostic output print LXT2 instead of LXT to make it clear which
dumper you are using.
The attached patch add an implementation for $dumplimit(). It does
not do a hard limit to the file size, but for VCD files it completes
the current time step and puts a comment in the file. For lxt and
lxt2 files the functionality is in place, but because of buffering
the file can be slightly larger than expected.
as well as a user specified log file, set log
file to buffer lines.
Add vpi_flush function, and clear up some cunfused
return codes from other vpi functions.
Adjust $display and vcd/lxt messages to use the
standard output/log file.
scaled to the local units. Change the internal
implementation of vpiSystemTime the $time functions
to properly account for this. Also add $simtime
to get the simulation time.
Cary R
Larry Doolittle
Martin Whitaker
Stephen Williams
Martin Whitaker
steve