Scalar signals have a preferred type of vpiScalarVal, but vectors
have a preferred type of vpiVectorVal. Use the signal width to
distinguish.
(cherry picked from commit 5fb89262df)
This patch removes bin32 from the clean targets since it is no
longer user/created. It adds autom4te.cache to the distclean
target in the main directory. It removes the files in driver
that are not created (lexor.c parse.c, etc.). The *.cc.output
files are no longer created so removing them is not needed.
(cherry picked from commit cf2f99ec3d)
The tranif input pins are normally nothing special, but sometimes
they are fed back from the switch body. In this case, the control
needs to see the current *output* from the fed back port, in order
to get the results that people expect.
(cherry picked from commit 33158355ba)
Conflicts:
tgt-vvp/draw_net_input.c
vvp/island_tran.cc
The local "memory.h" file is no longer used in V0.9 or development,
so it does not need to be included in vvp/codes.h. The VHDL target
does not use the system <memory.h> header file so there is no need
to have a define for it in the vhld_config.h.in file.
- Add missing dependency of configure on aclocal.m4.
- Remove config stamp files in make distclean (and fix another for
loop in base make distclean that I missed)
- Add stamp files to .gitignore
(cherry picked from commit c167b3a01f)
Use the time stamp file technique recommended by the autoconf manual
to prevent unneccesary rebuilds because of an unchanged config.h.
Uses the automake trick of generating the stamp files in the
_AC_AM_CONFIG_HEADER_HOOK macro instead of littering the source
directory with stamp-h.in files.
Add an extra ./config.status run after ./config.status --recheck
because with --recheck it doesn't actually try to remake the generated
files (and thus doesn't make the timestamp files). Thus without the
extra run, each stamp-*-h target would need to independently run
./config.status to make sure it wasn't changed by the configuration
change.
An orthogonal fix of how config.status is called in subdirectories.
When in a subdirectory and config.status is called with
../config.status and $(srcdir) is a relative path, config.status gets
confused. Fixed by replacing '../config.status --file=Makefile.in'
with 'cd ..; ./config.status --file=<dir>/Makefile.in'
(cherry picked from commit 7ead2aa88b)
This patch adds code to cleanup system functions driving a
continuous assignment. It also modifies the user function
cleanup to not interfere with this. It also adds a count
of the nets and signals that were not cleaned up that is
pnly printed when running valgrind. They are not flagged
y valgrind since they are pool managed objects. There are
a few signals that need to be cleaned up and local nets
are missed so there are a lot of nets.
(Cherry picked from dec524a151)
This patch adds cleanup code that cleans up the memory that is
allocated by the of_EXEC_UFUNC command. This knocks a few more
files off the valgrind list.
(cherry picked from commit 02ca7fe7fc)
This is needed to get vvp to compile under MacOS 10.6 and possibly other
64 bit systems that define uint64_t as unsigned long long vs unsigned
long (both are 64 bits).
(cherry picked from commit 39f243b18e)
operator= would try to overwrite it self under some circumstances.
This was found with valgrind and using -O0. It works with -O2.
(cherry picked from commit 9ea6604439)
Add a configuration check that says we would like to use C99 if the
compiler supports it. Also change the lround(), nan(), fmin() and
fmax() checks to look in the default libraries as well as the math
library.
Update the iverilog-vpi sh script to correctly quote CC since it
may now have two words (gcc -std=gnu99).
Add a missing int for main in draw_tt.c.
(cherry picked from commit ed7e9f8be5)
When reading from thread space only read the first 32 bits
(sizeof int) for the part select base. This matches the other
parts of the PV_get_base() code.
(cherry picked from commit c82baa2793)
This is based on a suggested fix from Martin. It fixes the crash
for two tests in the test suite. As a bonus it is more efficient.
(cherry picked from commit 43f41572cb)
This patch clears all the gcc 4.3.3 warning that can be fixed.
The remaining warning is dictated by older versions of the
1364 standard.
(cherry picked from commit 6d5d06cae4)
This patch fixes a problem in the .part/v select when the index is
undefined. The default value needs to be INT_MIN, so when the long
is cast to an int the value is in range.
(cherry picked from commit 1b300cb2f6)
To get better functionality in V0.9 and development until we
add a select that is sign aware to .part/v this patch uses
a 32 bit integer (int) for the select value. This allows a
normal Verilog integer to produce the correct results. A
warning for smaller signed index vectors is planned, but it
needs more input.
(cherry picked from commit 27f032760e)
&PV<> was just using vpi_get_value() when a signal was driving
the select. This incorrectly returned 0 for 'bx or 'bz. This
patch adds a check for an undefined value and returns INT_MIN
for this case.
(cherry picked from commit 1b0dd8c8e5)
The %shiftr/i0 and %shiftl/i0 opcodes are used for some part
selects and if we have a negative shift we want the value to be
padded with 'bx. This patch enhances the two %shift/i0 opcodes
to work with negative shifts and for negative shifts pad with
'bx instead of 'b0.
It also fixes %ix/get/s to use a uint64_t instead of a unsigned
long to avoid problems with sign extension on 32 bit machines.
(cherry picked from commit ecb00017cb)
These opcodes need to return 'bx or 0.0 for the real opcode when
the array index is undefined.
The patch also documents the auto incrementing of the bit
index register done by the %load/avx.p opcode.
(cherry picked from commit 8623f804f2)
When a part select is driving another part select any bits outside the
original select must be 'bz instead of 'bx. If we initialize the temporary
buffer to 'bz this should work as required. It there are multiple drivers
then a resolver comes into play and this should not matter.
(cherry picked from commit e31b6bd20c)
pr2827132 changed the val_ field in vvp_fun_part_sa to only store
the bit values for the selected part, not the entire source vector,
but omitted to modify the recv_vec4_pv method to handle this change.
This patch rectifies that omission.
(cherry picked from commit 7c6176357f)
If the previous event has exactly the same value as this event then
we do not add this event to the event queue.
(cherry picked from commit 2e820ca6f0)
It's not too likely we will ever reach this, but we should be nice
and print a message instead of just failing. We could set errno,
but for now the warning will have to be enough.
(cherry picked from commit b0ac550791)
Currently, edge event functors declared in automatically allocated
scopes that are used to detect edges on signals declared in static
scopes are unable to correctly determine edge information for the
first signal delta they receive because they do not know the old
state of the signal. This patch causes the state of static signals
received by these event functors to be recorded as static state in
the functors, so the old state of the signals can be initialised
to the correct value when a new automatic context is created.
(cherry picked from commit d7fe9c613c)
Currently a part select functor will send updates to nodes connected
to its output whenever any part of its input vector changes. This
patch ensures updates are only sent when the selected part of the
input vector changes.
(cherry picked from commit 1453c5b0bb)
Add code to the generic get_array_word_size() function to correctly
find the width of net arrays and use this routine in the _vthr_
code as needed.
(cherry picked from commit 212bd4134a)
This patch fixes a number of bugs related to real variable and net
arrays. Specifically the following:
1. When iterating over (scanning) a net array start at base index 0
not index 1.
2. Don't fail when iterating over (scanning) a real variable array.
3. Run the array_word_change() routine when a real variable array
word is changed. This allows array ports and value change
callbacks to work correctly.
4. Update the array_word_change() routine to work with real variable
arrays.
5. Update the array port code to support real variable arrays.
6. find_name() needs to also iterate over net array words just like
memory array words.
7. Initialize all real array words to 0.0 when the array is created.
The fd table used to be statically allocated with only 32 entries.
Three of these were preallocated for stdin, stdout and stderr
leaving only 29 for the user. This patch makes the allocation of
this table dynamic with a hard limit at 1024 total fds. The table
is increased in 32 bit chunks.
Someone got a bit too creative in reducing the original equations
I wrote to handle this. This patch reverts the previous code and
uses my original equations. This passes for both wide and narrow
vectors. The equations are slightly more complicated, but the old
z2x conversion had some overhead. I would expect the time to be
about the same, but you now get the correct results.
It looks pretty stupid and non-c++-y, but it does remove two compiler warnings
vvp/stop.cc: In function 'void stop_handler(int)':
vvp/stop.cc:492: warning: deprecated conversion from string constant to 'char*'
vvp/stop.cc:493: warning: deprecated conversion from string constant to 'char*'
This patch modifies the real parameter get_value routine to use
the standard vpip_real_get_value() routine. This routine has
support for an integer and a decimal string value.
This patch fixes the three %assign/v0/x1 operators to correctly
notice that the select has fallen off the start of the vector
for the case that the negative offset equaled the width.
This patch adds code to automatically dump the output stream
including any dump file when entering interactive mode. When
the user typed ^C or $stop was executed.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds interactive support for $stop and $finish.
$stop displays a message that the simulator is already stopped.
$finish acts exactly like (calls) the interactive "finish"
command. Having $stop do nothing and $finish not finish until
you exit interactive mode is not very intuitive.
When adding history (add_history) use both the existence of the
library and the header file to determine if history can be
supported. Add a new USE_HISTORY that is the and of these two.
(cherry picked from commit 4b2e5e5914)
This patch adds basic support for getting and putting values to
real array words. This will be finished during the VPI rework.
(cherry picked from commit 1dbc517164)
To get the correct print format for a 64 bit value it is much
better to use <inttypes.h> (when available) than building our
own value. This allows MinGW to use the non-standard I64.
Stephen Williams
Cary R
Jared Casper
Martin Whitaker
Larry Doolittle