Widths of real values are always 1. When paired with vectorable types
in expressions, the vectorable type is processed as losslessly self-
determined. ("unsized" in the test_width methods.)
the PGAssign elaborate method used the test_width to get the width
of the r-value expression. This should be completely sufficient to
get the width of the expression, so always use a defined width to
elaborate the expression.
Remove redundant pointer to the containing NetPins object by keeping
the pointer only in the first Link (pin 0) of an array of links. In
this link, replace the pin number with the NetPins pointer, and set
a pins_zero_ flag to indicate that this has happened. This way, only
the first pin in a Link array will have the pointer to the NetPins
that contains the array, and the pointer takes up practically no space
at all.
This class was old, and its original design pulled literally from
the LPM reference. But of nine pins declared, only 4 were used.
Remove all the excess junk and clean up the designed dump handling
of the device.
The true and false expression clauses must have compatible types,
which are not necesarily identical. In particular, VT_BOOL and
VT_LOGIC are compatible for the purposes of ternary arguments. The
test in NetETernary::synthesize was incorrect.
In the process, fix the type handling of NetConst objects to allow
for IVL_VT_BOOL constants. This is information that the downstream
may find useful, so should be handled correctly.
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
This patch moves the always zero or possibly zero delay checks
to a point after the circuit is full elaborated. Before it
could try to check tasks that had not already been evaluated
resulting in a crash.
This patch pushes the automatic property for both tasks and
functions to the code generators. The vvp back end does not
currently support this so it will error out during code
generation. The VHDL back end should be able to use this
property and tgt-stub prints the property. Having this will
also make it easier when we do adding this to the runtime.
This patch adds the $clog2 system function. It also makes this
function work as a constant function. The runtime version still
needs to be updated to use an integer based version instead of
the current double based method. The double method suffers from
rounding errors.
convert the continuous assign elaboration to use elaborate_expr
and synthesize methods instead of the elaborate_net methods of
PExpr. This exposes problems with the synthesize methods, but it
is a better way to do it.
In preparation for using the synthesize method to replace the
elaborate_net method of PExpr, rework the interface to the
synthesize() method. This changes no fnctionality, but does set
up the infrastructure for the next step.
When driving an input port to a module, watch out for the case where
the net is also driven within the instance. If this is the case, take
pains to make sure what goes on in the instance doesn't leak out
through the input port. Add a BUFZ (continuous assignment) to isolate
the context from internal driving.
The NetBranch object is connected, but not like an object, so the
NetPins object base class is factored out from NetObj to handle the
connectivity, and the NetBranch class uses the NetPins to connect a
branch.
Also, account for the fact that nets with a discipline are by default
real-valued.
Detect function call expressions that turn out to be calls to the
access function of a nature. Elaborate the access function and stub
the emit code. This gets the access function just short of the code
generator.
When generate schems and instance arrays are nested, it takes
multiple iterations of elaborate scope, defparams and evaluate
parameters before everything is worked out. Rework the work item
processing so that the loop elaborates scopes and runs defparams
in phases. The phases are needed so that we can tell when the
remaining defparams are orphaned.
It is possible for defparams to not find their target the first time
around, because the elaboration of the target scope is not yet done.
So retry the defparams once for each scope by putting it on a work
item in the elaborator_work_items list.
Putting scope elaboration into work queue items allows for handling
more complex processing order. The elaboration_work_list queue drives
the processing of elaborate_scope and parameter evaluation.
This patch adds .cast/int and updates .cast/real to act as a local
(temporary) net and to support either a signed or unsigned input.
The vvp_vector4_t class not can convert an arbitrarily sized double
to a vector value. This removes the restriction of lround().
Also document the new statements.
This handles the general case of a non-real operand to a real-valued
division. This can turn up if only 1 operand of a divide is real. In
this case the division as a whole is real and the other operand must
be cast to real.
This method creates an extra node, but it should be a very compact
node and this node does no evaluation tricks so in the run time should
be no more expensive then folding the cast into the .arith/div.r itself.
Rather then join islands while branches are initially created, save the
island creating for the end. This way, the process is actually recursive
and greedy, reliably collecting branches into islands without conflict.
Fold the bi-directional part select into the pass switch (tran) support
so that it can be really bi-directional. This involves adding a new
tranvp device that does part select in tran islands, and reworking the
tran island resolution to handle non-identical nodes. This will be needed
for resistive tran devices anyhow.
NetTran devices must be collected into islands because they are all
a bi-directional mass. This is how vvp will process them and the code
generator will need a head start organizing them.
This involves defining the API for switches and cleaning up the
elaborated form to match the defined ivl_target API. Also add t-dll
code to support the ivl_switch_t functions, and add stub code that
checks the results.
The tran devices include tran, rtran, tranif0/1 and rtranif0/1. These
are all elaborated as options on a NetTran device. It is still not
clear the best way to present tran devices via the ivl_target.h API.
Before this, the types of parameters were always logic, only the
width and signed-ness could be controlled. A parameter may take
on implicit real values if the expression were real.
With this patch, the type for the parameter can be explicitly set
to logic or real. This also means that the parameter real valued
expressions need to be more crefully treated, possibly with casting
integral expressions to real values, or real expressions to integral
values.
The pform is now translated/elaborated into NetScope objects. All that
remains is to check the parameter values against the ranges. This is
to be done in the evaluate_parameters() method.
The Verilog LRM specifies that it is legal to give constant part
selects that are beyond the bounds of the identifier being selected.
But elaboration was flagging that as an error. This patch changes it
to a warning, and handles the cases by generating 'bx bits as needed.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
In continuous assign expressions, the abs() operator can't easily be
burried in generic unary handling, so add the IVL_LPM_ABS type and
generate it as needed.
Implement in behavioral the abs/min/max operators for real values.
The parser treats these builtin functions as operators, unary or
binary, and elaborates them appropriately.
Also add enough code generator support to handle real valued expressions
in thread context.
This patch adds code to push the file and line information
for scope objects (modules, functions, tasks, etc.) to the
runtime. For modules, this includes the definition fields.
This patch adds ifnone functionality. It does not produce an
error when both an ifnone and an unconditional simple module
path are given. For this case the ifnone delays are ignored.
This patch adds check to determine if an always block has delay
in it or not. If there is no delay a runtime infinite loop will
occur. For the indeterminate case it will print a warning message
if the new -Winfloop flag is given. This flag is not part of the
-Wall check!
Stephen Williams
Martin Whitaker
Cary R
Larry Doolittle