To be strictly compliant with the standard and compatible with other
EDA tools, unsized numbers should be treated as having a fixed size
(the same size as an integer). The -gstrict-expr-width option is
extended to allow the user to enable this behaviour.
Rework lexical support for PACKAGE_IDENTIFIER so that the lexor
can help with package scoped identifiers.
Pform package types and package functions up to elaboration.
The SystemVerilog unbased literals (e.g. '0, '1, etc.) are expected to be
used standalone and cannot take a size. This patch modifies the parsing
code to give a good error message when this is done.
Class names can be declared early, before definitions, so that the
name can be used as a type name. This thus allows class definitions
to be separate from the declaration. This creates some complexity in
the parser, since the lexor knows about the class names.
This gets me to the point where the parser stashes a defined type,
and the lexical analyzer uses the type names to differentiate
IDENTIFIER and TYPE_IDENTIFIER.
This patch adds support for increment/decrement operators as an
expression. The operations on real and vector slices have been
disabled for now.
These operators can be used as in independent statements. However, the
corresponding support is not added in parser.
Changes since V2:
- Additional error checking in elaboration to deny operation on vector
slices and real (suggested by Martin)
Changes since V1:
- Use 'i' and 'I' for increment (suggested by Cary)
- Evaluate sub-expression once (suggested by Cary and Stev)
- Add necessary checks during elaboration to ensure that the
expression is valid (suggested Stev)
- Proper width handling with vectors (suggested by Martin)
Signed-off-by: Prasad Joshi <prasad@canopusconsultancy.com>
SystemVerilog extended the assignments operator support to C-like
assignment operators and special bitwise assignment operators.
For example:
a += 1;
a -= 1;
The list of these operators can be found in SV LRM (1800-2009)
section 11.4.1.
NOTE: I fixed a few parts of this. In particular, the PEBShift
class is used for shift operators.
Acked-and-Tested-by: Oswaldo Cadenas <oswaldo.cadenas@gmail.com>
Signed-off-by: Prasad Joshi <prasadjoshi124@gmail.com>
Added an explicit option prefix="yy" to files that were generated
without an explicit -P.
This makes the lex-generated symbol names self contained without any
help from from build system.
It was a poor choice to only add -g2009 for 1800-2009 and ignore the
previous version of System Verilog 1800-2005. This patch adds a
generation for 1800-2005 and also adds `begin_keywords support for
1800-2005. The previous SystemVerilog keywords have been put under
the 1800-2005 generation and the new one from 1800-2009 have also
been added.
When a verinum is displayed as a string we need to make sure that any
character that will be displayed as an octal constant must be converted
correctly. Also change to isprint() instead of isgraph() since it is the
same as isgraph() plus a space.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
Added generation flag -g2009 which enables support for 1800-2009
constructs. Added related support such as "1800-2009" in the
`begin_keywords directive.
Keeps 2005 as the default generation for now.
Removed the -gsytem-verilog flag and folded the 1800-2005 stuff into
1800-2009. The rationale behind this is we have so little of
1800-2005 actually implemented that it does not make sense to
distinguish between 1800-2005 and 1800-2009 SystemVerilog extensions,
so we just count them all as the new 1800-2009 Verilog language.
This patch is based on one from "bruce <bruce1914@gmail.com>".
I've applied all but the elaboration code, which I rewrote to
properly work with the elaboration work queue. I also constrained
the implementation so that the parameter name must have exactly
two components: the root scope name and the parameter name. This
is necessary to keep the defparm processing sane. The comments
from bruce's original patch are as follows:
--
This patch would provide function to define parameter from command
line. This serves the same functionality as 'defparam' in Verilog
source code, but provide much more ease for using. Parameter
definition can be write in command file, with following syntax:
+parameter+<scope>.<parameter>=<val>
*Do not apply any space between them*
The scope name should be full hierachical name with root name at
the begining. The following example would override test.T1 with
new value 2'b01:
+parameter+test.T1=2'b01
'test' here is the root module name. The parameter value here
should be constant. Parameter definition can also be write in
the command line:
iverilog -Ptest.T1=2'b01
This serves the same functionality with the previous example.
If we define the same parameter in command file and command line,
the one in command line would over-write all others.
This patch modifies the original SystemVerilog timeunit/timeprecision
patch in the following way:
Removed trailing space.
Reworked some code to use standard spacing rules.
Added some comments.
Combined some code.
Major rework of local/global timeunit/timeprecision logic.
Major rework of timeunit/timeprecision declaration/check code.
This was needed to remove the shift/reduce warnings.
Add a number of checks for invalid combinations.
This patch cleans up some unneeded code. Releases some allocated
memory before the compiler quits and fixes a couple minor memory
leaks in the compiler and vvp code generator.
This patch adds code to parse and ignore the following timing checks:
$nochange 1364-1995
$skew 1364-1995
$fullskew 1364-2001
$removal 1364-2001
$timeskew 1364-2001
The other checks were already supported. These have not been tested,
but they use the same basic terms as the other checks. We can fully
test these when we actually implement them.
Icarus has recognized this directive, but it did not do anything
with the information. This patch adds the functionality for most
common cases. It adds this by changing the input net type from
wire/tri to tri1 or tri0 depending on the pull. The issue is that
if the input net is not a wire or tri this is not safe and should
really be done as an external pull gate connected to the input.
We will need to handle this is it ever comes up. For now a sorry
message is printed.
Previously Icarus only supported a default net type of wire or none.
This patch adds the rest of the supported net types (all except
uwire and trireg) to the `default_nettype directive. It also fixes
make_implicit_net_() to use the default_nettype instead of always
using implicit (the same as wire).
This patch reworks the `timescale directive to do a better
job of parsing the line, it refactors some of the code and
should produce better error messages. It also tightens up
parsing the numeric constant, etc. to better match the
Verilog standard.
The parsing of `line has been enhanced to only allow 0, 1 or
2 for the level and a single line comment at the end of the
line is ignored.
This patch adds support for the `resetall directive.
It also changes `celldefine, `endcelldefine and `resetall
to no longer grab text following them. These directives do
not take an argument so they should not be grabbing any
text and silently discarding it.
The `timescale processing was reworked to handle being
reset and hooks were added to easily change the default
time units and precision when we add that feature request.
Cary R
Stephen Williams
Larry Doolittle
Martin Whitaker
Arun Persaud
Martin Whitaker
Prasad Joshi
Greg Steuck
Jared Casper
Sreeraj R