Replace explicit comparisons against generation_flag with calls to
the gn_system_verilog helper function, both for code clarity and
to fix a couple of bugs. Also simplify the implementation of the
function, as we already rely on the generation_flag enumeration
being an ordered list.
(cherry picked from commit 3c9b39846c)
Unsized expressions can expand to extremely large widths. Usually this
is actually a mistake in the source code, but it can lead to the compiler
temporarily using extremely large amounts of memory, or in the worst
case, crashing. This adds a cap on the width of unsized expressions (by
default 65536 bits, but overridable by the user), and causes a warning
message to be output when the cap is reached.
Emit the elaborated class methods. Also generate root scopes to
represent the classes in order to hold the methods. These scopes
can also in the future be used to implement static properties.
Pure functions with constant operands can be evaluated at compile
time rather than at run time. This patch provides a global control
to enable this optimisation. Until constant function support is
complete, by default it is disabled.
Since the vlog95 code generator needs the strength information we do
not want to hide it behind a concat-Z optimization. For now we abort
the optimization, but in the future we could add parts of this back
in (e.g. all the drivers have matching strength then replace with a
normal concat and a buf-Z if the strength are not both strong. The
original buf-Z should be removed to reduce the number of LPM devices).
Added: basic vpiPort VPI Objects for vpiModulkes
vpiDirection, vpiPortIndex, vpiName, vpiSize attributes
Since ports do not exist as net-like entities (nets either side
module instance boundaries are in effect connect directly in
the language front-ends internal representation) the port information
is effectively just meta-data passed through t-dll interface and
output as a additional annotation of module scopes in vvp.
Added: vpiLocalParam attribute for vpiParameter VPI objects
Added: support build for 32-bit target on 64-bit host (--with-m32
option to configure.in and minor tweaks to Makefiles and systemc-vpi).
It was a poor choice to only add -g2009 for 1800-2009 and ignore the
previous version of System Verilog 1800-2005. This patch adds a
generation for 1800-2005 and also adds `begin_keywords support for
1800-2005. The previous SystemVerilog keywords have been put under
the 1800-2005 generation and the new one from 1800-2009 have also
been added.
The compiler currently performs parameter expression elaboration before
performing parameter overrides. This means that the information needed
to correctly determine the expression type and width may not be available
at the time elaboration is performed. This patch reworks the code to
delay elaboration until after all overrides have been performed. It
also provides a new -g option that controls how the width of parameter
expressions is calculated when the parameter itself is unsized.
This gets the enumeration type through to the ivl_target API so
that code generators can do something with it. Generate stub
output with tgt-stub, and generate the proper vvp run time to
make simple enumerations work from end to end.
In ivl_alloc.h we redefine malloc(), realloc() and calloc() to have
standard error checking. We don't want to do this for anything that
comes from the standard headers. This specifically doesn't work if
a C++ header files does std::malloc, etc.
Also change to -W instead of -Wextra since that is more portable. I
plan to add a check from -Wextra and use it when available since it
is more descriptive.
This patch changes all the iterator code to use a prefix ++ instead
of postfix since it is more efficient (no need for a temporary). It
is likely that the compiler could optimize this away, but lets make
it efficient from the start.
This patch adds a check in the vvp back end that a uwire has
at most one driver. Previously this was just converted (with
a warning message) to a wire just after elaboration.
This patch adds the ability to call a system function as a task for
the SystemVerilog generation (-g2009). The return value is really
calculated, but it is ignored.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
This patch adds support for passing the delay selection to vvp.
It adds a new header :ivl_delay_selection "<value>"; that has
the values TYPICAL, MINIMUM or MAXIMUM depending on the -T
flag to iverilog. This information is needed by $sdf_annotate
to select that appropriate value for a triplet when
"TOOL_CONTROL" is specified (default).
Added generation flag -g2009 which enables support for 1800-2009
constructs. Added related support such as "1800-2009" in the
`begin_keywords directive.
Keeps 2005 as the default generation for now.
Removed the -gsytem-verilog flag and folded the 1800-2005 stuff into
1800-2009. The rationale behind this is we have so little of
1800-2005 actually implemented that it does not make sense to
distinguish between 1800-2005 and 1800-2009 SystemVerilog extensions,
so we just count them all as the new 1800-2009 Verilog language.
Creation of implicit nets requires knowledge of whether an identifier
has been declared before it is used. Currently implicit nets are
created during elaboration, but by this stage the order of declaration
and use is not known. This patch moves the creation of implicit nets
into the parser stage.
Try to put all the version stamps into common version_base.h
and version_stamp.h header files. All the source programs then
get their version from these header files.
Also handle the version stamps in the man pages by using the
version_*.h header file contents to edit the version strings
in the man page title bar markers.
This patch modifies the iverilog -M command line option to allow
the user to specify an optional output mode that controls which
files get added to the dependency list. This allows the user to
either get a list of all files that contribute to the design,
or a list of the include files, or a list of the module files.
This patch adds two new warning classes that can be enabled or
disabled via the -W command line option. The first controls
whether a warning is generated if a part select within an
always @* statement causes the entire vector to be added to
the implicit sensitivity list. The second controls whether a
warning is generated if a word select within an always @*
statement causes the entire array to be added to the implicit
sensitivity list. The first class is not automatically enabled
by -Wall, the second class is.
This patch adds support for a -Wselect-range warning class to the
driver and ivl programs. This is part of -Wall. The actual checks
will be added in a later patch.
This patch is based on one from "bruce <bruce1914@gmail.com>".
I've applied all but the elaboration code, which I rewrote to
properly work with the elaboration work queue. I also constrained
the implementation so that the parameter name must have exactly
two components: the root scope name and the parameter name. This
is necessary to keep the defparm processing sane. The comments
from bruce's original patch are as follows:
--
This patch would provide function to define parameter from command
line. This serves the same functionality as 'defparam' in Verilog
source code, but provide much more ease for using. Parameter
definition can be write in command file, with following syntax:
+parameter+<scope>.<parameter>=<val>
*Do not apply any space between them*
The scope name should be full hierachical name with root name at
the begining. The following example would override test.T1 with
new value 2'b01:
+parameter+test.T1=2'b01
'test' here is the root module name. The parameter value here
should be constant. Parameter definition can also be write in
the command line:
iverilog -Ptest.T1=2'b01
This serves the same functionality with the previous example.
If we define the same parameter in command file and command line,
the one in command line would over-write all others.
This patch cleans up some unneeded code. Releases some allocated
memory before the compiler quits and fixes a couple minor memory
leaks in the compiler and vvp code generator.
This patch adds -g2001-noconfig command line flag. The compiler
already supported this with `begin_keywords. Document this in
the manual page and fix a few other issues.
Fix endgenerate to be a 2001 keyword and add a few missing
keywords at the appropriate standard level e.g.(unsigned).
Add uwire and deprecate wone. wone used to just convert without
a warning to a wire. uwire will display a warning that it is
being converted to a wire without a check. wone is converted to
a uwire with a warning and then prints the uwire message. The
uwire message will be replaced with a real check fairly soon.
Martin Whitaker
Stephen Williams
Maciej Suminski
Cary R
Arun Persaud
Andrew Stevens
Larry Doolittle
Jared Casper