There is compatibility code that defines unique_ptr as auto_ptr if the C++
version is before C++11.
But there are already other parts of the codebase that do require C++11 and
the minimum required version to build the project is C++11. So remove the
compat code as it is no longer needed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The figure_packed_base_type() method can be used to check whether a type is
2-state or 4-state at parse time. The parser no longer cares about the
specific type of a data type. The figure_packed_base_type() function is
no longer used, so remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The custom `svector` class is essentially a subset of `std::vector`. There
is no inherent advantage to using `svector`. Both have the same memory
footprint.
`svector` was designed to be of static size, but there are a few places in
the parser where it has to grow at runtime. Handling this becomes a bit
easier by switching to `std::vector` since it is possible to use its
methods which take care of resizing the vector.
This also allows to remove the unused parameter of the `lgate` struct
constructor, which was only needed for compatibility with `svector`.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The lgate struct has its own fields for tracking file and line number,
while everything else that has this information attached inherits from the
LineInfo class.
Make lgate also inherit from LineInfo for consistency.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
There are currently two implementations for elaborating unpacked array
types. One that is used when elaborating a signal with an unpacked array
type and one that is used everywhere else using the elaborate_type()
infrastructure.
The elaborate_type() implementation is less complete and for example does
not support bounded queue types.
Consolidate both into a single implementation to reduce duplicated code and
get consistent behavior. This for example makes sure that the maximum queue
size is respected when used as a function return type.
Nested data structures of arrays, dynamic arrays or queues are not yet
supported. In the current implementation when encountering such a type an
assert will be triggered and the application crashes. In the new
implementation an error message will be printed without crashing the
application.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
This will allow to generate error messages that point to the right line if
there is something wrong or not supported in a class property declaration.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
When using non-ANSI style port declarations it is possible to declare the
port direction and the data type for the port in separate statements. E.g.
```
input x;
reg x;
```
When using packed array dimensions they must match for both declarations.
E.g.
```
input [3:0] x;
reg [3:0] x;
```
But this only applies for vector types, i.e. the packed dimension is
explicitly declared. It does not apply to the `integer` and `time` types,
which have an implicit packed dimension.
The current implementation requires that even for `integer` and `time`
types the implicit dimension needs to be explicitly declared in the port
direction. E.g. the following will result in a elaboration error
complaining about a packed dimension mismatch.
```
module test;
output x;
integer x;
endmodule
```
Currently the parser creates a vector_type_t for `time` and `integer`. This
means that e.g. `time` and `reg [63:0]` are indistinguishable during
elaboration, even though they require different behavior.
To fix let the atom2_type_t handle `integer` and `time`. Since it no longer
exclusively handles 2-state types, rename it to atom_type_t.
This also fixes a problem with the vlog95 target unit tests. The vlog95
target translates
```
module test(output integer x);
endmodule
```
to
```
module test(x);
output x;
integer x;
endmodule
```
which then fails when being elaborated again. There were some regression
tests that were failing because of this that will now pass.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The base type for an enum type can be a type identifier for a typedef as
long as it resolves to a vector or integer type with at most one packed
dimension. This is described in section 6.19 ("Enumerations") of the LRM
(1800-2017). E.g.
```
typedef bit [3:0] T;
enum T {
A
} e;
```
Add support for this by allowing to specify a type identifier as the base
type for an enum in the parser. During elaboration it is checked whether
the type identifier resolves to a valid enum base type.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
For some data types the value returned by the `elaborate_type()` method is
shared among different signals of that type. E.g. all string or real types
get elaborated to the same ivl_type_s. This means the returned value must
not be modified, otherwise the data type for unrelated signals might get
changed.
To enforce this and protect against accidental breakage make the return
type of the `elaborate_type()` and the related `elaborate_type_raw()`
methods const.
Note that `ivl_type_t` is used for the new return type which is a typedef
for `const ivl_type_s*`.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
In Verilog module input ports can only have a packed dimensions and a
signed flag, but no explicit data type.
In SystemVerilog an explicit data type can be specified for module input
ports. Such a port is a net, regardless of the data type, unless
explicitly made a variable using the `var` keyword.
This works for the most part in the current implementation, but for some
data types such as `reg` and `integer` the input port is turned into a
variable. And since input port's can't be variables in the current
implementation this results in an error.
Fix this by completely removing the `reg_flag` that is used to indicate
that a certain data type is always a variable. There is no such restriction
on data types for SystemVerilog and for Verilog there are already checks in
place that a input port can only have an implicit (or real) data type.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
enum_type_t inherits from LineInfo, but also has a LineInfo field called
`li`.
When a enum_type_t is created the LineInfo of the object itself is set to
the location where the type is declared.
The `li` field gets set when a signal of the enum_type_t is created to the
location where the signal is created. The `li` field is then used when
elaborating a netenum_t to set the line information on the netenum_t.
This works fine when the enum is directly used to declare a signal, since
the location of the type and signal declaration are the same and there is
only one signal of that type.
But when using a typedef and declaring multiple signals with the same type
the `li` field will be repeatedly set and eventually point to the last
signal declaration of that type.
On the other hand when using or declaring an enum as part of an aggregate
type such as an array, struct or class the line info will never be
set.
This can cause misleading error messages. E.g.
```
typedef enum {
A, B = A
} e_t;
struct packed {
e_t e;
} s;
```
will generate
```
:0: error: Enumeration name B and A have the same value: 32'sd0
```
To fix this use the LineInfo that was assigned to the enum_type_t itself
when it was declared and remove the `li` field.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
packed structs and packed unions as a whole can either be signed or
unsigned. This information is used when it is used as a primary in an
expression, i.e. without accessing any of the members.
Add support for parsing and elaborating signed structs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
To determine the base type structs and packed arrays call the
figure_packed_base_type() for their sub-types.
This method is not defined for enum or atom2 types and the default
implementation returns IVL_VT_NO_TYPE.
As a result packed arrays of enum or atom2 types and packed structs with
members of enum or atom2 types get elaborated with IVL_VT_NO_TYPE
as the base type.
For example
```
struct packed {
bit signed [31:0] x;
} s1;
```
gets elaborated with a base type of IVL_VT_BOOL, while
```
struct packed {
int x;
} s2;
```
gets elaborated with a base type of IVL_VT_NONE.
To fix this define the figure_packed_base_type() for enum_type_t and
atom2_type_t.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
There are too many ad hoc handlers of symbol_search partial results.
Rewrite symbol_search to clean up things like partial results and
member/method detections. Use this reworked symbol_search function
to rewrite expression elaborate for the PECallFunction expressions.
Use the common data_type_or_implicit rules to support type
definitions for parameters. This eliminates a bunch of special
rules in parse.y, and opens the door for parameters having
more complex types.
This.new is not allowed.
super.new beyond the first statement is not allowed.
And while I'm at it, clean up the use of "@" and "#" in
the code as tokens for this and super.
Some types, i.e. vector types with parameterized dimensions,
may have different elaboration results in different scopes.
Handle those cases in the elaboration caches.
When a module is instantiated multiple times, the enum
types contained within would cause trouble. This fixes
that by elaborating in proper scope context.
There were also some subtleties related to using enumerations
from typedefs and using them in multiple places. Fix various
bugs related to those issues.
Static properties are like variables in a named scope.
Detect these variables during elaboration so that the
code generator just sees them as variables.
Add properties to the classes, and elaborate expressions that
have class properties. Describe class object property references
all the way down to the stub target.
Lars-Peter Clausen
Martin Whitaker
Stephen Williams
Larry Doolittle
Cary R