Someone got a bit too creative in reducing the original equations
I wrote to handle this. This patch reverts the previous code and
uses my original equations. This passes for both wide and narrow
vectors. The equations are slightly more complicated, but the old
z2x conversion had some overhead. I would expect the time to be
about the same, but you now get the correct results.
This patch adds real functionality for `celldefine and pushes this
property to the run time which can access this with vpiCellInstance.
This is technically only available for a module, but all scopes
have the property and only modules should return true when the
'endmodule' is between a `celldefine and `endcelldefine directive.
It looks pretty stupid and non-c++-y, but it does remove two compiler warnings
vvp/stop.cc: In function 'void stop_handler(int)':
vvp/stop.cc:492: warning: deprecated conversion from string constant to 'char*'
vvp/stop.cc:493: warning: deprecated conversion from string constant to 'char*'
This patch modifies the real parameter get_value routine to use
the standard vpip_real_get_value() routine. This routine has
support for an integer and a decimal string value.
This patch fixes the three %assign/v0/x1 operators to correctly
notice that the select has fallen off the start of the vector
for the case that the negative offset equaled the width.
This patch adds code to automatically dump the output stream
including any dump file when entering interactive mode. When
the user typed ^C or $stop was executed.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds interactive support for $stop and $finish.
$stop displays a message that the simulator is already stopped.
$finish acts exactly like (calls) the interactive "finish"
command. Having $stop do nothing and $finish not finish until
you exit interactive mode is not very intuitive.
When adding history (add_history) use both the existence of the
library and the header file to determine if history can be
supported. Add a new USE_HISTORY that is the and of these two.
To get the correct print format for a 64 bit value it is much
better to use <inttypes.h> (when available) than building our
own value. This allows MinGW to use the non-standard I64.
(cherry picked from commit d237e35076)
The Multiword division was not handling some degenerate high
guesses for the intermediate division result guess. The end result
was an assertion. Recover from this case.
(Does the addinb back of bp need to be optimized better?)
This patch adds compiletf routines for the $sscanf/$fscanf
functions. It does not enhance the conversion routines it
only adds better error/warning messages.
It also removed the redundant IS_MCD in some of the fileio
calltf routines. This is already checked in vpi_get_file().
I also added the vpiNetArray type to allow us to distinguish
arrays of nets from other arrays (memories). Much more is
needed here, but this solved the problem of the day. The
problem was that we needed to make sure we could assign to
the word of a variable array, but not the word of a net array.
It's actually probably not needed since Icarus converts the
net array word reference to just the net, but I thought it
prudent to make sure things didn't slip by.
This is mostly a minor definition change in the parsing of literal
numbers by the vvp lexor. Allow for 64bit numbers in the .delay
records, and have the code generator also able to cope with the
situation.
Previously Icarus normalized the results so array [7:0] would
be the same as array [0:7]. This works just fine for
simulation, but the VPI calls can select the left or right
value and this was incorrect for the [7:0] case since it was
being normalized to [0:7]. This patch swaps the two values in
the a.out file and from this creates the previous first/last
values and a new flag that can be used to get the correct
left and right values for the VPI interface.
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
Two bugs:
(1) propagating values through the branch accidentally also
did a part select.
(2) Not all nodes of the branch nexus didn't receive a calculated
values, even though they were all marked as done.
In the process, I cleaned up the code a bit, and documented it for
better understanding.
The code was using vpi_free_object() to free a vpiCallback
object and that was creating a memory leak since this is a
do nothing routine. You need to explicitly use delete.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).
You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.
With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.
Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
If an &A() operator contains a label for an array that has not
yet been declared, vvp fails with an assertion error. This
patch delays the calls to array_find() in the functions that
compile &A() operators, using the usual resolve list mechanism.
Most named objects should have a vpiModule handle to get a handle
to the enclosing module. This patch adds code to get this for all
the elements that I could find that needed it.
It also adds a three more names to vpi_get_str(vpiType, ...) and
fixes a problem in the vpiLeftRange for PV signals.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
Certain paths through vpi_put_value cause a vpip_put_value_event to
be created with no path for deleting in. Add the capability in the
schedule_generic method, so that it can be delete as soon as it is
executed.
This patch fixes vvp to use the standard static result buffer
when returning the vector value of a constant string. The
previous calloc method was creating a memory leak.
This patch fixes some more memory leaks in vvp. Mostly related
to UDP compilation and one in find_scope() that was found when
testing the VPI code. The leak in ivlpp was that the define
temporary buffer not being freed when the lexor was finished.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
Rather then spread VERSION= defines throughout all the makefiles, put
the base version in version_base.in. Use that to generate a version.h
that includes the base version as well as the detailed version.
Cary R
Larry Doolittle
Stephen Williams
Martin Whitaker