Before the start of simulation, functor update events resulting from
initial value propagation are added to the initialisation event queue
(schedule_init_list). Once simulation has started, they are added to
the main event queue (sched_list). The cbStartOfSimulation callbacks
are executed after the initialisation event queue has been emptied.
Currently, if these callbacks generate further functor update events,
those events are added to the initialisation event queue, but that
queue is not looked at again. Instead, make sure any new events are
added to the main event queue.
This issue and proposed fix was reported by gatk555 in PR #1065.
In the current implementation a `%fork` instruction in a final block will
get scheduled, but never executed.
And while SystemVerilog requires a `final` procedure to execute in 0 time
and so no SystemVerilog `fork` is allowed inside of it, there are some
other scenarios where iverilog generates `%fork` statements.
For example when declaring variables in a sub-block a sub-scope with its
own thread is is used to allocate the storage for those variables and
`%fork` is used to execute the child thread.
E.g. the following, while being valid SystemVerilog, will never execute the
loop because the generated code will implement the loop as a child thread
being executed by a `%fork` statement.
```
final for (int i = 0; i < 10; i++) $display(i);
```
To mitigate this treat final statements the same as functions and rather
than scheduling a child thread, execute it immediately when using the
`%fork` statement.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The `recv_vec{4,8}_pv()` functions are used to implement a partial write to
a vector. As parameters they take both the value and the width of the
value.
All callers of of these functions pass `val.size()` or a variation thereof
as the width of the value. And all implementations that do anything with
the data have an assert that `val.size() == wid`.
Remove the `wid` parameter from these functions and just use `val.size()`
directly where needed. This allows to simplify the interface and also
to remove the asserts.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
SystemVerilog allows a mixture of procedural and continuous assignments
to be applied to different parts of the same vector. The previous attempt
to make this work for non-blocking assignments was flawed (see preceding
fix for vvp_fun_part_pv::recv_vec4_pv). Instead, handle this case by
converting the non-blocking assignment into a delayed force statement,
which matches the way mixed continuous and blocking assignments are
handled.
Added: basic vpiPort VPI Objects for vpiModulkes
vpiDirection, vpiPortIndex, vpiName, vpiSize attributes
Since ports do not exist as net-like entities (nets either side
module instance boundaries are in effect connect directly in
the language front-ends internal representation) the port information
is effectively just meta-data passed through t-dll interface and
output as a additional annotation of module scopes in vvp.
Added: vpiLocalParam attribute for vpiParameter VPI objects
Added: support build for 32-bit target on 64-bit host (--with-m32
option to configure.in and minor tweaks to Makefiles and systemc-vpi).
Instead of C-like data structures where the __vpiHandle base is a
leading member, make the __vpiHandle a derived class. Give the base
class a virtual destructor so that dynamic_cast works reliably, and
now pretty much all of the junk for testing if an object really is
of the derived class goes away. Also, problems with casting up to
a vpiHandle become trivial non-issues.
This patch makes the code consistently use struct/class in the C++ files,
it removes a couple shadow warnings and where a class pointer is passed to
the C routines, it defines the pointer as a class for C++ and as struct for
C and it removes a namespace std duplication.
Add a new IVL_PR_FINAL process type.
Add a flag to NetScope in_final_ which is set when elaborating the
statement of a final procedure.
Add checks during statement elaboration for invalid statements in a
final procedure, similar to checks for statements in functions.
Do a final check to make sure no final blocks have delays.
In the vvp runtime, use "$final" as the flag for the thread created by
the final procedure. During compilation, instead of adding such a
thread to the sched_list, add it to a new schedule_final_list that
mirrors the schedule_init_list, but is run at the end of simulation.
This patch adds support for tracing procedural statement execution in vvp.
This is accomplished by adding a new opcode that is inserted before the
code that represents a procedural statement. These opcodes also trigger
a message whenever time advances. By default these opcodes are not added.
To add them, pass the -pfileline=1 flag to the compiler. In the future we
may add support for turning the debug output on and off once the opcodes
have been added with a system task or from the interactive prompt.
This patch adds -Wextra to the compilation flags for C++ files in
the vvp and vpi subdirectories. It also fixes all the problems
found while adding -Wextra. This mostly entailed removing some of
the unused arguments, removing the name for others and using the
correct number of initializers.
This patch adds a few missing initializations to various constructors
in the vvp directory. It also enhances the array alias code to copy
more values from the aliased array.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
This patch is similar to the previous patches and cleans up a single
place in the vvp directory where an enum had a trailing ',' and a
place where a C++ routine needed extern "C".
To ensure the initial propagation of 'x' values at time-0 does not
trigger any events, the propagation of these values needs to be
completed before any statements that wait on events are executed.
vvp has a pre-simulation event queue to handle this, but some
functors defeat this by postponing their output propagation using
the stratified event queue. This patch fixes this by using the
pre-simulation event queue to schedule functor output propagation
until initial value propagation is complete.
If a net is driven by a simple variable, an initial 'x' value is
propagated to the net at time-0. The same thing should happen if
a net is driven by a variable array word. This patch makes this
happen by scheduling an initial event for each array port attached
to a variable array.
The fix for pr1830834 causes vvp to only delete a completed thread
when the simulation time next advances. If a procedural model is
being simulated which makes many task or function calls within a
single time step, this can lead to excessive memory use. This patch
modifies the behaviour so that thread deletion is only delayed if
that thread has caused a sync event to be placed in the event queue.
This should catch all cases where the thread private data can be
accessed after a thread has terminated.
Certain paths through vpi_put_value cause a vpip_put_value_event to
be created with no path for deleting in. Add the capability in the
schedule_generic method, so that it can be delete as soon as it is
executed.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
ga
gatk555
Lars-Peter Clausen
Martin Whitaker
Cary R
Stephen Williams
Yury Gribov
Christian Taedcke
Martin Whitaker
Maciej Suminski
Arun Persaud
Andrew Stevens
Jared Casper
Picture Elements Inc