luke
/
UberDDR3
mirror of https://github.com/AngeloJacobo/UberDDR3.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

add instantiation template

This commit is contained in:
AngeloJacobo 2023-11-18 13:35:38 +08:00
parent 292f94c530
commit efc194a633
1 changed files with 97 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

103
rtl/ddr3_top.v
View File

@ -7,8 +7,8 @@ module ddr3_top #(
ROW_BITS = 14, //width of row address ROW_BITS = 14, //width of row address
COL_BITS = 10, //width of column address COL_BITS = 10, //width of column address
BA_BITS = 3, //width of bank address BA_BITS = 3, //width of bank address
DQ_BITS = 8, //width of DQ DQ_BITS = 8, //device width
LANES = 8, //lanes of DQ LANES = 8, //number of DDR3 device to be controlled
AUX_WIDTH = 4, //width of aux line (must be >= 4) AUX_WIDTH = 4, //width of aux line (must be >= 4)
WB2_ADDR_BITS = 7, //width of 2nd wishbone address bus WB2_ADDR_BITS = 7, //width of 2nd wishbone address bus
WB2_DATA_BITS = 32, //width of 2nd wishbone data bus WB2_DATA_BITS = 32, //width of 2nd wishbone data bus
@ -17,8 +17,8 @@ module ddr3_top #(
OPT_BUS_ABORT = 1, //1 = can abort bus, 0 = no abort (i_wb_cyc will be ignored, ideal for an AXI implementation which cannot abort transaction) OPT_BUS_ABORT = 1, //1 = can abort bus, 0 = no abort (i_wb_cyc will be ignored, ideal for an AXI implementation which cannot abort transaction)
/* verilator lint_on UNUSEDPARAM */ /* verilator lint_on UNUSEDPARAM */
MICRON_SIM = 0, //enable faster simulation for micron ddr3 model (shorten POWER_ON_RESET_HIGH and INITIAL_CKE_LOW) MICRON_SIM = 0, //enable faster simulation for micron ddr3 model (shorten POWER_ON_RESET_HIGH and INITIAL_CKE_LOW)
TEST_DATAMASK = 0, //add test to datamask during calibration
ODELAY_SUPPORTED = 1, //set to 1 when ODELAYE2 is supported ODELAY_SUPPORTED = 1, //set to 1 when ODELAYE2 is supported
SECOND_WISHBONE = 0, //set to 1 if 2nd wishbone is needed
parameter // The next parameters act more like a localparam (since user does not have to set this manually) but was added here to simplify port declaration parameter // The next parameters act more like a localparam (since user does not have to set this manually) but was added here to simplify port declaration
serdes_ratio = $rtoi(CONTROLLER_CLK_PERIOD/DDR3_CLK_PERIOD), serdes_ratio = $rtoi(CONTROLLER_CLK_PERIOD/DDR3_CLK_PERIOD),
wb_addr_bits = ROW_BITS + COL_BITS + BA_BITS - $clog2(serdes_ratio*2), wb_addr_bits = ROW_BITS + COL_BITS + BA_BITS - $clog2(serdes_ratio*2),
@ -32,6 +32,7 @@ module ddr3_top #(
input wire i_controller_clk, i_ddr3_clk, i_ref_clk, //i_controller_clk = CONTROLLER_CLK_PERIOD, i_ddr3_clk = DDR3_CLK_PERIOD, i_ref_clk = 200MHz input wire i_controller_clk, i_ddr3_clk, i_ref_clk, //i_controller_clk = CONTROLLER_CLK_PERIOD, i_ddr3_clk = DDR3_CLK_PERIOD, i_ref_clk = 200MHz
input wire i_ddr3_clk_90, //required only when ODELAY_SUPPORTED is zero input wire i_ddr3_clk_90, //required only when ODELAY_SUPPORTED is zero
input wire i_rst_n, input wire i_rst_n,
//
// Wishbone inputs // Wishbone inputs
input wire i_wb_cyc, //bus cycle active (1 = normal operation, 0 = all ongoing transaction are to be cancelled) input wire i_wb_cyc, //bus cycle active (1 = normal operation, 0 = all ongoing transaction are to be cancelled)
input wire i_wb_stb, //request a transfer input wire i_wb_stb, //request a transfer
@ -72,11 +73,95 @@ module ddr3_top #(
inout wire[(DQ_BITS*LANES)/8-1:0] io_ddr3_dqs, io_ddr3_dqs_n, inout wire[(DQ_BITS*LANES)/8-1:0] io_ddr3_dqs, io_ddr3_dqs_n,
output wire[LANES-1:0] o_ddr3_dm, output wire[LANES-1:0] o_ddr3_dm,
output wire o_ddr3_odt, // on-die termination output wire o_ddr3_odt, // on-die termination
//
// Debug outputs
output wire[31:0] o_debug1, output wire[31:0] o_debug1,
output wire[31:0] o_debug2, output wire[31:0] o_debug2,
output wire[31:0] o_debug3 output wire[31:0] o_debug3,
output wire[(DQ_BITS*LANES)/8-1:0] o_ddr3_debug_read_dqs_p,
output wire[(DQ_BITS*LANES)/8-1:0] o_ddr3_debug_read_dqs_n
); );
// Instantiation Template
/*
// DDR3 Controller
ddr3_top #(
.CONTROLLER_CLK_PERIOD(10_000), //ps, clock period of the controller interface
.DDR3_CLK_PERIOD(2_500), //ps, clock period of the DDR3 RAM device (must be 1/4 of the CONTROLLER_CLK_PERIOD)
.ROW_BITS(14), //width of row address
.COL_BITS(10), //width of column address
.BA_BITS(3), //width of bank address
.DQ_BITS(8), //device width
.LANES(2), //number of DDR3 device to be controlled
.AUX_WIDTH(4), //width of aux line (must be >= 4)
.WB2_ADDR_BITS(32), //width of 2nd wishbone address bus
.WB2_DATA_BITS(32), //width of 2nd wishbone data bus
.OPT_LOWPOWER(1), //1 = low power, 0 = low logic
.OPT_BUS_ABORT(1), //1 = can abort bus, 0 = no absort (i_wb_cyc will be ignored, ideal for an AXI implementation which cannot abort transaction)
.MICRON_SIM(0), //enable faster simulation for micron ddr3 model (shorten POWER_ON_RESET_HIGH and INITIAL_CKE_LOW)
.ODELAY_SUPPORTED(0), //set to 1 when ODELAYE2 is supported
.SECOND_WISHBONE(0), //set to 1 if 2nd wishbone is needed
) ddr3_top
(
//clock and reset
.i_controller_clk(i_controller_clk),
.i_ddr3_clk(i_ddr3_clk), //i_controller_clk has period of CONTROLLER_CLK_PERIOD, i_ddr3_clk has period of DDR3_CLK_PERIOD
.i_ref_clk(i_ref_clk),
.i_ddr3_clk_90(i_ddr3_clk_90),
.i_rst_n(!i_rst && clk_locked),
//
// Wishbone inputs
.i_wb_cyc(1), //bus cycle active (1 = normal operation, 0 = all ongoing transaction are to be cancelled)
.i_wb_stb(i_wb_stb), //request a transfer
.i_wb_we(i_wb_we), //write-enable (1 = write, 0 = read)
.i_wb_addr(i_wb_addr), //burst-addressable {row,bank,col}
.i_wb_data(i_wb_data), //write data, for a 4:1 controller data width is 8 times the number of pins on the device
.i_wb_sel(16'hffff), //byte strobe for write (1 = write the byte)
.i_aux(i_wb_we), //for AXI-interface compatibility (given upon strobe)
// Wishbone outputs
.o_wb_stall(o_wb_stall), //1 = busy, cannot accept requests
.o_wb_ack(o_wb_ack), //1 = read/write request has completed
.o_wb_data(o_wb_data), //read data, for a 4:1 controller data width is 8 times the number of pins on the device
.o_aux(o_aux),
//
// Wishbone 2 (PHY) inputs
.i_wb2_cyc(), //bus cycle active (1 = normal operation, 0 = all ongoing transaction are to be cancelled)
.i_wb2_stb(), //request a transfer
.i_wb2_we(), //write-enable (1 = write, 0 = read)
.i_wb2_addr(), //burst-addressable {row,bank,col}
.i_wb2_data(), //write data, for a 4:1 controller data width is 8 times the number of pins on the device
.i_wb2_sel(), //byte strobe for write (1 = write the byte)
// Wishbone 2 (Controller) outputs
.o_wb2_stall(), //1 = busy, cannot accept requests
.o_wb2_ack(), //1 = read/write request has completed
.o_wb2_data(), //read data, for a 4:1 controller data width is 8 times the number of pins on the device
//
// DDR3 I/O Interface
.o_ddr3_clk_p(ddr3_clk_p),
.o_ddr3_clk_n(ddr3_clk_n),
.o_ddr3_reset_n(ddr3_reset_n),
.o_ddr3_cke(ddr3_cke), // CKE
.o_ddr3_cs_n(ddr3_cs_n), // chip select signal (controls rank 1 only)
.o_ddr3_ras_n(ddr3_ras_n), // RAS#
.o_ddr3_cas_n(ddr3_cas_n), // CAS#
.o_ddr3_we_n(ddr3_we_n), // WE#
.o_ddr3_addr(ddr3_addr),
.o_ddr3_ba_addr(ddr3_ba),
.io_ddr3_dq(ddr3_dq),
.io_ddr3_dqs(ddr3_dqs_p),
.io_ddr3_dqs_n(ddr3_dqs_n),
.o_ddr3_dm(ddr3_dm),
.o_ddr3_odt(ddr3_odt), // on-die termination
// Debug outputs
.o_debug1(o_debug1),
.o_debug2(o_debug2),
.o_debug3(o_debug3),
.o_ddr3_debug_read_dqs_p(o_ddr3_debug_read_dqs_p),
.o_ddr3_debug_read_dqs_n(o_ddr3_debug_read_dqs_n)
////////////////////////////////////
);
*/
// Wire connections between controller and phy // Wire connections between controller and phy
wire[cmd_len*serdes_ratio-1:0] cmd; wire[cmd_len*serdes_ratio-1:0] cmd;
wire dqs_tri_control, dq_tri_control; wire dqs_tri_control, dq_tri_control;
@ -111,7 +196,7 @@ module ddr3_top #(
.OPT_LOWPOWER(OPT_LOWPOWER), //1 = low power, 0 = low logic .OPT_LOWPOWER(OPT_LOWPOWER), //1 = low power, 0 = low logic
.OPT_BUS_ABORT(OPT_BUS_ABORT), //1 = can abort bus, 0 = no abort (i_wb_cyc will be ignored, ideal for an AXI implementation which cannot abort transaction) .OPT_BUS_ABORT(OPT_BUS_ABORT), //1 = can abort bus, 0 = no abort (i_wb_cyc will be ignored, ideal for an AXI implementation which cannot abort transaction)
.MICRON_SIM(MICRON_SIM), //simulation for micron ddr3 model (shorten POWER_ON_RESET_HIGH and INITIAL_CKE_LOW) .MICRON_SIM(MICRON_SIM), //simulation for micron ddr3 model (shorten POWER_ON_RESET_HIGH and INITIAL_CKE_LOW)
.TEST_DATAMASK(TEST_DATAMASK) //add test to datamask during calibration .SECOND_WISHBONE(SECOND_WISHBONE) //set to 1 if 2nd wishbone is needed
) ddr3_controller_inst ( ) ddr3_controller_inst (
.i_controller_clk(i_controller_clk), //i_controller_clk has period of CONTROLLER_CLK_PERIOD .i_controller_clk(i_controller_clk), //i_controller_clk has period of CONTROLLER_CLK_PERIOD
.i_rst_n(i_rst_n), //200MHz input clock .i_rst_n(i_rst_n), //200MHz input clock
@ -162,8 +247,10 @@ module ddr3_top #(
.o_phy_bitslip(bitslip), .o_phy_bitslip(bitslip),
.o_phy_write_leveling_calib(write_leveling_calib), .o_phy_write_leveling_calib(write_leveling_calib),
.o_phy_reset(reset), .o_phy_reset(reset),
// Debug outputs
.o_debug1(o_debug1), .o_debug1(o_debug1),
.o_debug2(o_debug2) .o_debug2(o_debug2),
.o_debug3(o_debug3)
); );
ddr3_phy #( ddr3_phy #(
@ -217,7 +304,9 @@ module ddr3_top #(
.io_ddr3_dqs(io_ddr3_dqs), .io_ddr3_dqs(io_ddr3_dqs),
.io_ddr3_dqs_n(io_ddr3_dqs_n), .io_ddr3_dqs_n(io_ddr3_dqs_n),
.o_ddr3_dm(o_ddr3_dm), .o_ddr3_dm(o_ddr3_dm),
.o_ddr3_odt(o_ddr3_odt) // on-die termination .o_ddr3_odt(o_ddr3_odt), // on-die termination
.o_ddr3_debug_read_dqs_p(o_ddr3_debug_read_dqs_p),
.o_ddr3_debug_read_dqs_n(o_ddr3_debug_read_dqs_n)
); );
endmodule endmodule