mirror of https://github.com/VLSIDA/OpenRAM.git
346 lines
15 KiB
Python
346 lines
15 KiB
Python
# See LICENSE for licensing information.
|
|
#
|
|
# Copyright (c) 2016-2019 Regents of the University of California and The Board
|
|
# of Regents for the Oklahoma Agricultural and Mechanical College
|
|
# (acting for and on behalf of Oklahoma State University)
|
|
# All rights reserved.
|
|
#
|
|
import contact
|
|
import design
|
|
import debug
|
|
import math
|
|
from bisect import bisect_left
|
|
from tech import layer, drc
|
|
from vector import vector
|
|
from globals import OPTS
|
|
|
|
if(OPTS.tech_name == "s8"):
|
|
from tech import nmos_bins, pmos_bins, accuracy_requirement
|
|
|
|
class pgate(design.design):
|
|
"""
|
|
This is a module that implements some shared
|
|
functions for parameterized gates.
|
|
"""
|
|
|
|
def __init__(self, name, height=None):
|
|
""" Creates a generic cell """
|
|
design.design.__init__(self, name)
|
|
|
|
if height:
|
|
self.height = height
|
|
elif not height:
|
|
# By default, we make it 10 M1 pitch tall
|
|
self.height = 10*self.m1_pitch
|
|
|
|
self.create_netlist()
|
|
if not OPTS.netlist_only:
|
|
self.create_layout()
|
|
self.add_boundary()
|
|
self.DRC_LVS()
|
|
|
|
def create_netlist(self):
|
|
""" Pure virtual function """
|
|
debug.error("Must over-ride create_netlist.", -1)
|
|
|
|
def create_layout(self):
|
|
""" Pure virtual function """
|
|
debug.error("Must over-ride create_layout.", -1)
|
|
|
|
def connect_pin_to_rail(self, inst, pin, supply):
|
|
""" Connects a ptx pin to a supply rail. """
|
|
source_pin = inst.get_pin(pin)
|
|
supply_pin = self.get_pin(supply)
|
|
if supply_pin.overlaps(source_pin):
|
|
return
|
|
|
|
if supply == "gnd":
|
|
height = supply_pin.by() - source_pin.by()
|
|
elif supply == "vdd":
|
|
height = supply_pin.uy() - source_pin.by()
|
|
else:
|
|
debug.error("Invalid supply name.", -1)
|
|
|
|
if abs(height) > 0:
|
|
self.add_rect(layer="m1",
|
|
offset=source_pin.ll(),
|
|
height=height,
|
|
width=source_pin.width())
|
|
|
|
def route_input_gate(self, pmos_inst, nmos_inst, ypos, name, position="left"):
|
|
"""
|
|
Route the input gate to the left side of the cell for access.
|
|
Position specifies to place the contact the left, center, or
|
|
right of gate.
|
|
"""
|
|
|
|
nmos_gate_pin = nmos_inst.get_pin("G")
|
|
pmos_gate_pin = pmos_inst.get_pin("G")
|
|
|
|
# Check if the gates are aligned and give an error if they aren't!
|
|
if nmos_gate_pin.ll().x != pmos_gate_pin.ll().x:
|
|
self.gds_write("unaliged_gates.gds")
|
|
debug.check(nmos_gate_pin.ll().x == pmos_gate_pin.ll().x,
|
|
"Connecting unaligned gates not supported. See unaligned_gates.gds.")
|
|
|
|
# Pick point on the left of NMOS and up to PMOS
|
|
nmos_gate_pos = nmos_gate_pin.ul() + vector(0.5 * self.poly_width, 0)
|
|
pmos_gate_pos = vector(nmos_gate_pos.x, pmos_gate_pin.bc().y)
|
|
self.add_path("poly", [nmos_gate_pos, pmos_gate_pos])
|
|
|
|
# Add the via to the cell midpoint along the gate
|
|
left_gate_offset = vector(nmos_gate_pin.lx(), ypos)
|
|
|
|
# Center is completely symmetric.
|
|
contact_width = contact.poly_contact.width
|
|
contact_m1_width = contact.poly_contact.second_layer_width
|
|
contact_m1_height = contact.poly_contact.second_layer_height
|
|
|
|
if position == "center":
|
|
contact_offset = left_gate_offset \
|
|
+ vector(0.5 * self.poly_width, 0)
|
|
elif position == "farleft":
|
|
contact_offset = left_gate_offset \
|
|
- vector(0.5 * contact.poly_contact.width, 0)
|
|
elif position == "left":
|
|
contact_offset = left_gate_offset \
|
|
- vector(0.5 * contact_width - 0.5 * self.poly_width, 0)
|
|
elif position == "right":
|
|
contact_offset = left_gate_offset \
|
|
+ vector(0.5 * contact_width + 0.5 * self.poly_width, 0)
|
|
else:
|
|
debug.error("Invalid contact placement option.", -1)
|
|
|
|
if hasattr(self, "li_stack"):
|
|
self.add_via_center(layers=self.li_stack,
|
|
offset=contact_offset)
|
|
|
|
self.add_via_center(layers=self.poly_stack,
|
|
offset=contact_offset)
|
|
|
|
self.add_layout_pin_rect_center(text=name,
|
|
layer="m1",
|
|
offset=contact_offset,
|
|
width=contact_m1_width,
|
|
height=contact_m1_height)
|
|
# This is to ensure that the contact is
|
|
# connected to the gate
|
|
mid_point = contact_offset.scale(0.5, 1) \
|
|
+ left_gate_offset.scale(0.5, 0)
|
|
self.add_rect_center(layer="poly",
|
|
offset=mid_point,
|
|
height=contact.poly_contact.first_layer_width,
|
|
width=left_gate_offset.x - contact_offset.x)
|
|
|
|
def extend_wells(self):
|
|
""" Extend the n/p wells to cover whole cell """
|
|
|
|
# This should match the cells in the cell library
|
|
self.nwell_y_offset = 0.48 * self.height
|
|
full_height = self.height + 0.5* self.m1_width
|
|
|
|
# FIXME: float rounding problem
|
|
if "nwell" in layer:
|
|
# Add a rail width to extend the well to the top of the rail
|
|
nwell_max_offset = max(self.find_highest_layer_coords("nwell").y,
|
|
full_height)
|
|
nwell_position = vector(0, self.nwell_y_offset) - vector(self.well_extend_active, 0)
|
|
nwell_height = nwell_max_offset - self.nwell_y_offset
|
|
self.add_rect(layer="nwell",
|
|
offset=nwell_position,
|
|
width=self.well_width,
|
|
height=nwell_height)
|
|
if "vtg" in layer:
|
|
self.add_rect(layer="vtg",
|
|
offset=nwell_position,
|
|
width=self.well_width,
|
|
height=nwell_height)
|
|
|
|
# Start this half a rail width below the cell
|
|
if "pwell" in layer:
|
|
pwell_min_offset = min(self.find_lowest_layer_coords("pwell").y,
|
|
-0.5 * self.m1_width)
|
|
pwell_position = vector(-self.well_extend_active, pwell_min_offset)
|
|
pwell_height = self.nwell_y_offset - pwell_position.y
|
|
self.add_rect(layer="pwell",
|
|
offset=pwell_position,
|
|
width=self.well_width,
|
|
height=pwell_height)
|
|
if "vtg" in layer:
|
|
self.add_rect(layer="vtg",
|
|
offset=pwell_position,
|
|
width=self.well_width,
|
|
height=pwell_height)
|
|
|
|
def add_nwell_contact(self, pmos, pmos_pos):
|
|
""" Add an nwell contact next to the given pmos device. """
|
|
|
|
layer_stack = self.active_stack
|
|
|
|
# To the right a spacing away from the pmos right active edge
|
|
contact_xoffset = pmos_pos.x + pmos.active_width \
|
|
+ self.active_space
|
|
|
|
# Must be at least an well enclosure of active down
|
|
# from the top of the well
|
|
# OR align the active with the top of PMOS active.
|
|
max_y_offset = self.height + 0.5 * self.m1_width
|
|
contact_yoffset = min(pmos_pos.y + pmos.active_height - pmos.active_contact.first_layer_height,
|
|
max_y_offset - pmos.active_contact.first_layer_height / 2 - self.nwell_enclose_active)
|
|
contact_offset = vector(contact_xoffset, contact_yoffset)
|
|
# Offset by half a contact in x and y
|
|
contact_offset += vector(0.5 * pmos.active_contact.first_layer_width,
|
|
0.5 * pmos.active_contact.first_layer_height)
|
|
self.nwell_contact = self.add_via_center(layers=layer_stack,
|
|
offset=contact_offset,
|
|
implant_type="n",
|
|
well_type="n")
|
|
if hasattr(self, "li_stack"):
|
|
self.add_via_center(layers=self.li_stack,
|
|
offset=contact_offset)
|
|
|
|
self.add_rect_center(layer="m1",
|
|
offset=contact_offset + vector(0, 0.5 * (self.height - contact_offset.y)),
|
|
width=self.nwell_contact.mod.second_layer_width,
|
|
height=self.height - contact_offset.y)
|
|
|
|
# Now add the full active and implant for the PMOS
|
|
# active_offset = pmos_pos + vector(pmos.active_width,0)
|
|
# This might be needed if the spacing between the actives
|
|
# is not satisifed
|
|
# self.add_rect(layer="active",
|
|
# offset=active_offset,
|
|
# width=pmos.active_contact.width,
|
|
# height=pmos.active_height)
|
|
|
|
# we need to ensure implants don't overlap and are
|
|
# spaced far enough apart
|
|
# implant_spacing = self.implant_space+self.implant_enclose_active
|
|
# implant_offset = active_offset + vector(implant_spacing,0) \
|
|
# - vector(0,self.implant_enclose_active)
|
|
# implant_width = pmos.active_contact.width \
|
|
# + 2*self.implant_enclose_active
|
|
# implant_height = pmos.active_height + 2*self.implant_enclose_active
|
|
# self.add_rect(layer="nimplant",
|
|
# offset=implant_offset,
|
|
# width=implant_width,
|
|
# height=implant_height)
|
|
|
|
# Return the top of the well
|
|
|
|
def add_pwell_contact(self, nmos, nmos_pos):
|
|
""" Add an pwell contact next to the given nmos device. """
|
|
|
|
layer_stack = self.active_stack
|
|
|
|
# To the right a spacing away from the nmos right active edge
|
|
contact_xoffset = nmos_pos.x + nmos.active_width \
|
|
+ self.active_space
|
|
# Must be at least an well enclosure of active up
|
|
# from the bottom of the well
|
|
contact_yoffset = max(nmos_pos.y,
|
|
self.nwell_enclose_active \
|
|
- nmos.active_contact.first_layer_height / 2)
|
|
contact_offset = vector(contact_xoffset, contact_yoffset)
|
|
|
|
# Offset by half a contact
|
|
contact_offset += vector(0.5 * nmos.active_contact.first_layer_width,
|
|
0.5 * nmos.active_contact.first_layer_height)
|
|
self.pwell_contact= self.add_via_center(layers=layer_stack,
|
|
offset=contact_offset,
|
|
implant_type="p",
|
|
well_type="p")
|
|
|
|
if hasattr(self, "li_stack"):
|
|
self.add_via_center(layers=self.li_stack,
|
|
offset=contact_offset)
|
|
|
|
self.add_rect_center(layer="m1",
|
|
offset=contact_offset.scale(1, 0.5),
|
|
width=self.pwell_contact.mod.second_layer_width,
|
|
height=contact_offset.y)
|
|
|
|
# Now add the full active and implant for the NMOS
|
|
# active_offset = nmos_pos + vector(nmos.active_width,0)
|
|
# This might be needed if the spacing between the actives
|
|
# is not satisifed
|
|
# self.add_rect(layer="active",
|
|
# offset=active_offset,
|
|
# width=nmos.active_contact.width,
|
|
# height=nmos.active_height)
|
|
|
|
# implant_spacing = self.implant_space+self.implant_enclose_active
|
|
# implant_offset = active_offset + vector(implant_spacing,0) \
|
|
# - vector(0,self.implant_enclose_active)
|
|
# implant_width = nmos.active_contact.width \
|
|
# + 2*self.implant_enclose_active
|
|
# implant_height = nmos.active_height + 2*self.implant_enclose_active
|
|
# self.add_rect(layer="pimplant",
|
|
# offset=implant_offset,
|
|
# width=implant_width,
|
|
# height=implant_height)
|
|
|
|
def determine_width(self):
|
|
""" Determine the width based on the well contacts (assumed to be on the right side) """
|
|
# Width is determined by well contact and spacing and allowing a supply via between each cell
|
|
self.width = max(self.nwell_contact.rx(), self.pwell_contact.rx()) + self.m1_space + 0.5 * contact.m1_via.width
|
|
self.well_width = self.width + 2 * self.nwell_enclose_active
|
|
# Height is an input parameter, so it is not recomputed.
|
|
|
|
def bin_width(self, tx_type, target_width):
|
|
|
|
if tx_type == "nmos":
|
|
bins = nmos_bins[drc("minwidth_poly")]
|
|
elif tx_type == "pmos":
|
|
bins = pmos_bins[drc("minwidth_poly")]
|
|
else:
|
|
debug.error("invalid tx type")
|
|
|
|
bins = bins[0:bisect_left(bins, target_width) + 1]
|
|
if len(bins) == 1:
|
|
selected_bin = bins[0]
|
|
scaling_factor = math.ceil(target_width / selected_bin)
|
|
scaled_bin = bins[0] * scaling_factor
|
|
|
|
else:
|
|
scaled_bins = []
|
|
scaling_factors = []
|
|
scaled_bins.append(bins[-1])
|
|
scaling_factors.append(1)
|
|
for width in bins[0:-1]:
|
|
m = math.ceil(target_width / width)
|
|
scaling_factors.append(m)
|
|
scaled_bins.append(m * width)
|
|
|
|
select = bisect_left(scaled_bins, target_width)
|
|
scaling_factor = scaling_factors[select]
|
|
scaled_bin = scaled_bins[select]
|
|
select = (select + 1) % len(scaled_bins)
|
|
selected_bin = bins[select]
|
|
|
|
debug.info(2, "binning {0} tx, target: {4}, found {1} x {2} = {3}".format(tx_type, selected_bin, scaling_factor, scaled_bin, target_width))
|
|
|
|
return(selected_bin, scaling_factor)
|
|
|
|
def permute_widths(self, tx_type, target_width):
|
|
|
|
if tx_type == "nmos":
|
|
bins = nmos_bins[drc("minwidth_poly")]
|
|
elif tx_type == "pmos":
|
|
bins = pmos_bins[drc("minwidth_poly")]
|
|
else:
|
|
debug.error("invalid tx type")
|
|
bins = bins[0:bisect_left(bins, target_width) + 1]
|
|
if len(bins) == 1:
|
|
scaled_bins = [(bins[0], math.ceil(target_width / bins[0]))]
|
|
else:
|
|
scaled_bins = []
|
|
scaled_bins.append((bins[-1], 1))
|
|
for width in bins[:-1]:
|
|
m = math.ceil(target_width / width)
|
|
scaled_bins.append((m * width, m))
|
|
|
|
return(scaled_bins)
|
|
|
|
def bin_accuracy(self, ideal_width, width):
|
|
return abs(1-(ideal_width - width)/ideal_width) |